Editing Watch display

Jump to navigation Jump to search

Warning: You are not logged in. Your IP address will be publicly visible if you make any edits. If you log in or create an account, your edits will be attributed to your username, along with other benefits.

The edit can be undone. Please check the comparison below to verify that this is what you want to do, and then save the changes below to finish undoing the edit.

Latest revision Your text
Line 1: Line 1:
The display is perhaps the most critical part of a wrist computer such as the [[uWatch]] and the [[Open Source Watch]].
 
 
 
The [http://www.calcwatch.com/history.htm history of the uWatch] mentions the 53mm x 20mm compact 16x2 line LCD that convinced David L. Jones that the uWatch project was actually doable with off-the-shelf components.
 
The [http://www.calcwatch.com/history.htm history of the uWatch] mentions the 53mm x 20mm compact 16x2 line LCD that convinced David L. Jones that the uWatch project was actually doable with off-the-shelf components.
 
If you are doing low-level programming of the uWatch, such as making "custom characters", you might want to look at [http://www.electusdistribution.com.au/products_uploaded/QP-5519-2.pdf the datasheet] (via [http://www.calcwatch.com/forum/viewtopic.php?id=37 "Moon Phases"]).
 
If you are doing low-level programming of the uWatch, such as making "custom characters", you might want to look at [http://www.electusdistribution.com.au/products_uploaded/QP-5519-2.pdf the datasheet] (via [http://www.calcwatch.com/forum/viewtopic.php?id=37 "Moon Phases"]).
Line 9: Line 7:
 
[http://www.newhavendisplay.com/index.php?main_page=product_info&cPath=3_113&products_id=1824&zenid=goih7iect56osjf64srb498qi4 Newhaven NHD-C12832A1Z-FSW-FBW-3V3] 128x32 Pixels display.
 
[http://www.newhavendisplay.com/index.php?main_page=product_info&cPath=3_113&products_id=1824&zenid=goih7iect56osjf64srb498qi4 Newhaven NHD-C12832A1Z-FSW-FBW-3V3] 128x32 Pixels display.
 
Which uses less than 100uA which would enable a continuous display watch. The "white LED backlight" uses 30 mA at 3.0 V but is still very usable at much lower currents.
 
Which uses less than 100uA which would enable a continuous display watch. The "white LED backlight" uses 30 mA at 3.0 V but is still very usable at much lower currents.
 
There's some discussion of some of the screens considered for the first iteration of the Open Source Watch at http://oswatch.org/details_screen.php .
 
  
 
Proposed displays:
 
Proposed displays:
Line 23: Line 19:
 
* [http://www.avesodisplays.com/products/index.html card display]: 6 digit, 7 segment display module designed to fit inside a credit card. lightest-weight display of those on this list; adequate for 4-function calculator watch. Doesn't seem to show enough information for a scientific calculator.
 
* [http://www.avesodisplays.com/products/index.html card display]: 6 digit, 7 segment display module designed to fit inside a credit card. lightest-weight display of those on this list; adequate for 4-function calculator watch. Doesn't seem to show enough information for a scientific calculator.
 
* [http://www.sparkfun.com/commerce/categories.php?c=76 Sparkfun LCD displays]: the color graphics LCD cell phone displays look relatively low power and are extremely well documented -- some of them are under $20.
 
* [http://www.sparkfun.com/commerce/categories.php?c=76 Sparkfun LCD displays]: the color graphics LCD cell phone displays look relatively low power and are extremely well documented -- some of them are under $20.
** [https://www.sparkfun.com/products/10168 Graphic LCD 84x48 - Nokia 5110]: power: the datasheet says 2.7 V to 3.3 V at 0.24 mA typical; but the [https://learn.sparkfun.com/tutorials/graphic-lcd-hookup-guide "Graphic LCD Hookup Guide" tutorial] says 2.7 to 3.3V at 7 mA (?) (when the 3 V at 100 mA white backlight LEDs are off) ... [https://learn.adafruit.com/nokia-5110-3310-monochrome-lcd Adafruit: Nokia 5110/3310 Monochrome LCD tutorial]
+
** [https://www.sparkfun.com/products/10168 Graphic LCD 84x48 - Nokia 5110]: power: the datasheet says 2.7 V to 3.3 V at 0.24 mA typical; but the [https://learn.sparkfun.com/tutorials/graphic-lcd-hookup-guide "Graphic LCD Hookup Guide" tutorial] says 2.7 to 3.3V at 7 mA (?) (when the 3 V at 100 mA white backlight LEDs are off)
 
** [https://www.sparkfun.com/products/11676 Serial Miniature OLED Module - 1.5" (μOLED-128-G2-GFX)] : 128 x 128 resolution, 65K colors, 1.5". Power: 5 V at 60 mA typical when on, 0.1 mA when all pixels black (?). Includes microSD socket.
 
** [https://www.sparkfun.com/products/11676 Serial Miniature OLED Module - 1.5" (μOLED-128-G2-GFX)] : 128 x 128 resolution, 65K colors, 1.5". Power: 5 V at 60 mA typical when on, 0.1 mA when all pixels black (?). Includes microSD socket.
 
** [https://www.sparkfun.com/products/11377 Serial Miniature LCD Module - 1.44" (uLCD-144-G2 GFX)] : 128 x 128 resolution, 65K colors. Power: 5 V at 40 mA typical when on, 0.5 mA when all pixels black (?). Includes microSD socket.
 
** [https://www.sparkfun.com/products/11377 Serial Miniature LCD Module - 1.44" (uLCD-144-G2 GFX)] : 128 x 128 resolution, 65K colors. Power: 5 V at 40 mA typical when on, 0.5 mA when all pixels black (?). Includes microSD socket.
 
** [https://www.sparkfun.com/products/256 Basic 20x4 Character LCD - Black on Green 5V] : Power: 5 V at 1.5 mA typical (when the 4 V at 250 mA LED backlight is off)
 
** [https://www.sparkfun.com/products/256 Basic 20x4 Character LCD - Black on Green 5V] : Power: 5 V at 1.5 mA typical (when the 4 V at 250 mA LED backlight is off)
 
** [https://www.sparkfun.com/products/13192 SHARP Memory Display Breakout - Silver Monochrome (1.3", 96x96)] : Power: 12 uW (?) 2.7 V to 3.3 V updated at 1 Hz. Apparently several libraries: [https://github.com/olikraus/u8glib U8glib: A graphics library with support for many different monochrome displays]; [https://github.com/pabigot/bsp430/blob/next/src/boosterpack/sharp96/u8g_bsp430.c]; [https://github.com/adafruit/Adafruit_SHARP_Memory_Display]; ...
 
** [https://www.sparkfun.com/products/13192 SHARP Memory Display Breakout - Silver Monochrome (1.3", 96x96)] : Power: 12 uW (?) 2.7 V to 3.3 V updated at 1 Hz. Apparently several libraries: [https://github.com/olikraus/u8glib U8glib: A graphics library with support for many different monochrome displays]; [https://github.com/pabigot/bsp430/blob/next/src/boosterpack/sharp96/u8g_bsp430.c]; [https://github.com/adafruit/Adafruit_SHARP_Memory_Display]; ...
* ...
 
* [https://www.adafruit.com/products/1673 Adafruit LCDs & displays] has a huge list; a few of them are low-power enough for an always-on wristwatch display (have I missed any?):
 
** [https://www.adafruit.com/products/1393 "SHARP Memory Display Breakout - 1.3" 96x96 Silver Monochrome"] : Power: 12 uW (4 uA at 3.3 V with 1 Hz data refresh)
 
** [https://www.adafruit.com/products/250 Graphic ST7565 Positive LCD (128x64) with RGB backlight + extras - ST7565] : Power: 3.0 V at 1 mA (when the 5.0 V at 120 mA backlight is off) (What exactly is the difference between this and the [https://www.adafruit.com/products/438 "Graphic ST7565 Negative LCD (128x64) with RGB backlight + extras - ST7565"]?)
 
** [https://www.adafruit.com/products/398 "RGB backlight positive LCD 16x2 + extras - black on RGB"] and [https://www.adafruit.com/products/399 "RGB backlight negative LCD 16x2 + extras - RGB on black"]. Is this really 2.7 V to 4.5 V at 0.3 mA ? (When R, G, and B LEDs are turned off).
 
* Digikey has a long list of display modules at [http://www.digikey.com/product-search/en/optoelectronics/display-modules-lcd-oled-character-and-numeric/524437?stock=1 Digikey: LCD and OLED Character and Numeric Display Modules in stock] and also [http://www.digikey.com/product-search/en/optoelectronics/display-modules-lcd-oled-graphic/524918?stock=1 Digikey: LCD and OLED Graphic Display Modules in stock]. Which of them are low-power enough for an always-on wristwatch display?
 
 
* ...
 
* ...
 
* ... ''Have you seen a display that would work on a wrist calculator? Please add it to the list here!'' ...
 
* ... ''Have you seen a display that would work on a wrist calculator? Please add it to the list here!'' ...

Please note that all contributions to OpenCircuits may be edited, altered, or removed by other contributors. If you do not want your writing to be edited mercilessly, then do not submit it here.
You are also promising us that you wrote this yourself, or copied it from a public domain or similar free resource (see OpenCircuits:Copyrights for details). Do not submit copyrighted work without permission!

Cancel Editing help (opens in new window)