Difference between revisions of "User talk:Seekic"

From OpenCircuits
Jump to navigation Jump to search
 
(22 intermediate revisions by 2 users not shown)
Line 26: Line 26:
 
To provide information and technique literatures for the enterprise
 
To provide information and technique literatures for the enterprise
 
like this IC electronic component CB55000 datasheet and pdf download:
 
like this IC electronic component CB55000 datasheet and pdf download:
http://www.chinaicmart.com
+
http://www.seekic.com
  
 
'''1 GENERAL DESCRIPTION'''
 
'''1 GENERAL DESCRIPTION'''
Line 39: Line 39:
  
 
HC4316M HC4316A  HC4316D datasheet and PDF check:
 
HC4316M HC4316A  HC4316D datasheet and PDF check:
http://www.chinaicmart.com/series-HC4/HC4316A.html
+
http://www.seekic.com
  
 
The HC4316A is similar in function to the metal–gate CMOS MC14016  nd MC14066, and to the High–Speed CMOS HC4016A and HC4066A.  
 
The HC4316A is similar in function to the metal–gate CMOS MC14016  nd MC14066, and to the High–Speed CMOS HC4016A and HC4066A.  
Line 48: Line 48:
 
== RH5RL42AA-TR datasheet and PDF ==
 
== RH5RL42AA-TR datasheet and PDF ==
  
'''RH5RL42AA-TR datasheet and PDF''' check from http://www.chinaicmart.com/series-RH5/RH5RL42AA-TR.html
+
'''RH5RL42AA-TR datasheet and PDF''' check from http://www.seekic.com
 
 
 
'''OUTLINE'''
 
'''OUTLINE'''
 
The RH5RL Series are voltage regulator ICs with high accuracy output voltage and ultra-low quiescent current by CMOS process. Each of these ICs consists of a voltage reference unit, an error amplifier, a driver transistor, and resistors for setting output voltage. The output voltage is fixed with high accuracy. Three types of packages, TO-92, SOT-89 (Mini-power Mold), SOT-23-5 (Mini-mold), are available.
 
The RH5RL Series are voltage regulator ICs with high accuracy output voltage and ultra-low quiescent current by CMOS process. Each of these ICs consists of a voltage reference unit, an error amplifier, a driver transistor, and resistors for setting output voltage. The output voltage is fixed with high accuracy. Three types of packages, TO-92, SOT-89 (Mini-power Mold), SOT-23-5 (Mini-mold), are available.
Line 61: Line 60:
 
M27C4002-12J1X M27C4002-12J6X M27C4002-12C6X M27C4002-12F KM684002-20  M38002-128 2025-6002-10 CM3002-15  
 
M27C4002-12J1X M27C4002-12J6X M27C4002-12C6X M27C4002-12F KM684002-20  M38002-128 2025-6002-10 CM3002-15  
  
http://www.chinaicmart.com/series-KM6/KM684002-17.html
+
http://www.seekic.com/
  
 
'''GENERAL DESCRIPTION'''  
 
'''GENERAL DESCRIPTION'''  
Line 71: Line 70:
  
 
0002 PDF download:  
 
0002 PDF download:  
http://www.chinaicmart.com/series-000/0002.html
+
http://www.seekic.com/
  
 
The MSK 0002 is a general purpose current amplifier. It is the industry wide replacement for the LH0002. The device is ideal for use with an operational amplifier in a closed loop configuration to increase current output. The MSK 0002 is designed with a symmetrical output stage that provides low output impedances to both the positive and negative portions of output pulses. The MSK 0002 is packaged in a hermetic 8 lead low profile T0-5 header and is specified over the full military temperature range.  
 
The MSK 0002 is a general purpose current amplifier. It is the industry wide replacement for the LH0002. The device is ideal for use with an operational amplifier in a closed loop configuration to increase current output. The MSK 0002 is designed with a symmetrical output stage that provides low output impedances to both the positive and negative portions of output pulses. The MSK 0002 is packaged in a hermetic 8 lead low profile T0-5 header and is specified over the full military temperature range.  
Line 79: Line 78:
 
== M27C512 datasheet ==
 
== M27C512 datasheet ==
  
M27C512 datasheet http://www.chinaicmart.com/series-M27/M27C512.html
+
M27C512 datasheet http://www.seekic.com/
  
 
SUMMARY DESCRIPTION
 
SUMMARY DESCRIPTION
Line 90: Line 89:
 
'''93LC66A datasheet and PDF check from'''
 
'''93LC66A datasheet and PDF check from'''
  
http://www.chinaicmart.com/series-93L/93LC66A.html
+
http://www.seekic.com/
  
 
'''93LC66A DESCRIPTION'''
 
'''93LC66A DESCRIPTION'''
Line 99: Line 98:
  
 
33793 3361 336EGW 33661 33702 33742 33742S 33887 33888  
 
33793 3361 336EGW 33661 33702 33742 33742S 33887 33888  
more detail  http://www.chinaicmart.com/series-337/33793.html
+
more detail  http://www.seekic.com/
  
 
'''Distributed System Interface (DSI) Sensor Interface'''
 
'''Distributed System Interface (DSI) Sensor Interface'''
Line 119: Line 118:
 
== 3PMT75A 3PMT78A 3PMT8.0A 3PMT8.5A datasheet  ==
 
== 3PMT75A 3PMT78A 3PMT8.0A 3PMT8.5A datasheet  ==
  
more detail http://www.chinaicmart.com/series-3PM/3PMT75A.html
+
more detail http://www.seekic.com
  
 
3PMT75A 3PMT78A 3PMT8.0A 3PMT8.5A 3PMT9.0A 3PMT90A 3PMT170A 3R1000R  
 
3PMT75A 3PMT78A 3PMT8.0A 3PMT8.5A 3PMT9.0A 3PMT90A 3PMT170A 3R1000R  
Line 131: Line 130:
 
VNW50N04A  datesheet
 
VNW50N04A  datesheet
  
http://www.chinaicmart.com/series-VNW/VNW50N04A.html
+
http://www.seekic.com
  
 
'''DESCRIPTION'''
 
'''DESCRIPTION'''
Line 138: Line 137:
 
== NX8566LE811-CC NX8566LE862-CC NX8566LE820-BC NX8566LE6074-CC datasheet  ==
 
== NX8566LE811-CC NX8566LE862-CC NX8566LE820-BC NX8566LE6074-CC datasheet  ==
  
NX8566LE811-CC datasheet  http://www.chinaicmart.com/series-NX8/NX8566LE811-CC.html
+
NX8566LE811-CC datasheet  http://www.seekic.com
  
 
'''NX8566LE811-CC  description'''  
 
'''NX8566LE811-CC  description'''  
Line 157: Line 156:
 
Meets MIL-E-5400 Environments
 
Meets MIL-E-5400 Environments
  
more detail from http://www.qooic.com/detail-2025-6004-20.html
+
more detail from http://www.seekic.com
  
 
== IDT54FCT646CTEB datasheet ==
 
== IDT54FCT646CTEB datasheet ==
  
IDT54FCT646CTEB datasheet more detail check from  http://www.chinaicmart.com/series-IDT/IDT54FCT646CTEB.html
+
IDT54FCT646CTEB datasheet more detail check from  http://www.seekic.com
  
 
'''DESCRIPTION:'''
 
'''DESCRIPTION:'''
Line 197: Line 196:
 
'''X9400WV24-2.7  X9400WS24I X9400WS24I-2.7 datasheet download:
 
'''X9400WV24-2.7  X9400WS24I X9400WS24I-2.7 datasheet download:
  
http://www.chinaicmart.com/series-X94/X9400WV24-2.7.html
+
http://www.seekic.com
  
 
X9400
 
X9400
Line 228: Line 227:
 
MAX4071AUA MAX4061ETA MAX4062EUB datasheet and PDF check from  
 
MAX4071AUA MAX4061ETA MAX4062EUB datasheet and PDF check from  
  
http://www.chinaicmart.com/series-MAX/MAX4071AUA.html
+
http://www.seekic.com
  
 
'''General Description'''
 
'''General Description'''
Line 268: Line 267:
 
'''LH75401 datasheet more detail check from  
 
'''LH75401 datasheet more detail check from  
  
http://www.chinaicmart.com/series-LH7/LH75401.html
+
http://www.seekic.com
  
 
DESCRIPTION'''
 
DESCRIPTION'''
Line 337: Line 336:
 
== 96L02 9602FMQB 9601DMQB datasheet  ==
 
== 96L02 9602FMQB 9601DMQB datasheet  ==
  
'''96L02 9602FMQB 9601DMQB datasheet more detail check from http://www.chinaicmart.com/series-96L/96L02.html
+
'''96L02 9602FMQB 9601DMQB datasheet more detail check from http://www.seekic.com
 
 
 
96L02/DM96L02
 
96L02/DM96L02
 
Dual Retriggerable Resettable
 
Dual Retriggerable Resettable
Line 362: Line 360:
 
'''DS1230Y-100 datasheet download check from'''  
 
'''DS1230Y-100 datasheet download check from'''  
  
http://www.chinaicmart.com/series-DS1/DS1230Y-100.html
+
http://www.seekic.com/
  
 
'''FEATURES'''
 
'''FEATURES'''
Line 392: Line 390:
 
== TDA16888 TDA16888G datasheet  ==
 
== TDA16888 TDA16888G datasheet  ==
  
TDA16888 TDA16888G datasheet more detail check from http://www.chinaicmart.com/series-TDA/TDA16888.html
+
TDA16888 TDA16888G datasheet more detail check from http://www.seekic.com/
  
 
'''PFC Section'''
 
'''PFC Section'''
Line 419: Line 417:
 
'''M57962L datasheet more detail check from
 
'''M57962L datasheet more detail check from
  
http://www.chinaicmart.com/series-M57/M57962L.html
+
http://www.seekic.com
  
 
Hybrid Integrated Circuit
 
Hybrid Integrated Circuit
Line 458: Line 456:
  
 
The ADD8504/ADD8505/ADD8506 are specified over the −40°C to +105°C temperature range. They are available, respectively, in 16-, 20-, and 24-lead thin shrink small outline (TSSOP), surface-mount, Pb-free packages.
 
The ADD8504/ADD8505/ADD8506 are specified over the −40°C to +105°C temperature range. They are available, respectively, in 16-, 20-, and 24-lead thin shrink small outline (TSSOP), surface-mount, Pb-free packages.
 +
 +
== 2SB1689 2SB1689T106 2SB169 datasheet and pdf ==
 +
 +
2SB1689 2SB1689T106 2SB169 datasheet and pdf more detail check from
 +
 +
http://www.seekic.com/newstock/2SB1689,2SB1689T106,2SB169.html
 +
 +
'''2SB621, 2SB621A
 +
Silicon PNP epitaxial planer type
 +
For low-frequency output amplification
 +
Complementary to 2SD592 and 2SD592A'''
 +
 +
'''Features'''
 +
 +
Low collector to emitter saturation voltage VCE(sat).
 +
High transition frequency fT.
 +
 +
== The 310-021001-001 Datasheet ==
 +
 +
The model 310-021001-001 is a spdt switch.Now we give you some information about the features.There are six features as follows.The first one is that it is a reflective SPDT switch.The second one is that it has wide bandwidth which is from 100 MHz to 22 GHz.The third one is that it has fast switching speed which is 100 ns typical.The fourth one is that it has a integral TTL driver.The fifth one is that the operating temperature is from -55 ℃ to + 85 ℃.The sixth one is that the environmental screening is available.
 +
      You have to get some detail information about the maximum ratings if you want to purchase the product.It has five maximum ratings.The first one is about ambient operating temperature which ranges from -55 ℃ to + 100 ℃.The second one is about the storage temperature which ranges from  -55℃ to + 100 ℃.The third one is that the operating case temperature is + 125 ℃.The fourth one is that the DC voltage is  + 6.0 / -15V.The fifth one is that the continuous RF input power is +30 dBm.
 +
 +
more information from www.ChinaICMart.com and www.seekic.com
 +
 +
== 30CTH03PbF Datasheet ==
 +
 +
Description:
 +
 +
      The planar structure and the platinum doped life time control guarantee the best overall performance,ruggedness and reliability characteristics.The 30CTH03PbF are intended for use in the output rectification stage of SMPS,UPS,DC-DC converters as well as freewheeling diodes in low voltage inverters and chopper motor drives.Their extremely optimized stored charge and low recovery current minimize the switching losses and reduce over dissipation in the switching element and snubbers.Edited by (http://www.seekic.com/icdata/30CTH03PbF.html),the leading IC purchasers' best choice of platform for one-stop valued service!
 +
 +
      The 30CTH03PbF have five features.The first one is that it is designed with hyperfast recovery time.The sencond one is about low forward voltage drop.The third one is about low leakage current.The fourth one is that the 30CTH03PbF allows for reliable operation up to 175℃ junction temperature.The last one is about lead-free("PbF" suffix).
 +
      The 30CTH03PbF have some absolute maximum ratings.The maximum of VRRM which means peak repetitive reverse voltage is 300V.The maximum of IF(AV) which means average rectified forward current is 15A per diode at Tc=153℃ and 30A per device.The maximum of IFSM which means non repetitive peak surge current is 150A at Tj=25℃.The maximum of Tj,TSTG which means operating junction and storage temperatures is from -65 to 175℃.
 +
      The following is about its thermal-mechanical characteristics.The maximum of Tj which means junction temperature is 175℃.The minimum of Tstg which means storage temperature is -65℃ and the maximum of it is 175℃.The maximum of RthJC which means thermal resistance and junction to case per diode is 1.4 ℃/W.

Latest revision as of 01:51, 5 November 2009

hi everybody.I am majored in Electronic .Now I Want to share the electronic technical knowledge, we also discuss about it .

DO you know some integrated circuit models,and how to find their datasheet and pdf ,free download.Now some friends tell me a IC platform http://www.chinaicmart.com

There are many IC models in it ,eg: LM324 LM358 NBC3111 LM317 LM339 MAX232 78L05 NE555 TL431 7805 2SK1522 P521 DS18B20 TDA2030 S8050 PC817

If you want to download MAX232 datasheet and pdf ,you can click here http://www.chinaicmart.com/series-MAX/MAX232.html more and more detail contact with me dzsc028@hotmail.com


Hi Seekic,

An increasing number of your posts are entirely commercial in nature. In one instance, I have seen you replace a page of useful information with your own commercial posting.

This Wiki can't support that kind of traffic if it is going to be a successful source of information for this site's users.

Please refrain from posting what are essentially advertisements, and never replace other people's posts with your own, especially when it is purely commercial.

--Chazegh 13:42, 16 July 2008 (PDT)

IC electronic component CB55000[edit]

To provide information and technique literatures for the enterprise like this IC electronic component CB55000 datasheet and pdf download: http://www.seekic.com

1 GENERAL DESCRIPTION

The CB55000 standard cell series uses a high performance, low-voltage, 0.25 mm drawn (0.20 mm effective),six metal levels CMOS process HCMOS7 to a 90 pico-second internal delay while offering very low power dissipation and high noise immunity. With an average routed gate density of 30,000 gates/mm2, the CB55000 family allows the integration of up to 15 million equivalent gates and is ideal for high-complexity or high-performance devices for computer, telecommunication and consumer products. With a typical gate delay of 70 ps (for a 2-input NAND gate at fan-out 1), the library meets the most demanding speed requirements in telecommunication and computer application designs today. Optimized for 2.5 V operation, the library features a power consumption of less than 70 nW/Gate/MHz (fanout=1) and 30 nW/Gate/MHz (fan-out=1) at 1.8 V. The I/O buffers can be fully configured for both 2.5 V and 3.3 V interface options, with several high speed buffer types available. These include: low voltage differential (LVDS) I/Os, PCI/AGP, PECLs, and HSTL. The pad pitch down to 50 mm, in a staggered arrangement, meets the requirements of high pin-count devices which tend to become pad-limited at such library densities. For very high pin-count ICs, advanced packaging solutions such as Chip Scale Packaging in fine pitch BGA are available. New packaging solutions using a flip-chip approach are currently being developed.

HC4316M HC4316A HC4316D datasheet and PDF[edit]

HC4316M HC4316A HC4316D datasheet and PDF check: http://www.seekic.com

The HC4316A is similar in function to the metal–gate CMOS MC14016 nd MC14066, and to the High–Speed CMOS HC4016A and HC4066A.

Each device has four independent switches. The device control and Enable nputs are compatible with standard CMOS outputs; with pullup resistors, they are compatible with LSTTL outputs. The device has been designed so that the ON resistances (R ) are much more linear over input voltage than ON R of metal–gate CMOS analog switches. Logic–level translators are ON rovided so that the On/Off V and V . When the Enable pin (active–low) is high.

RH5RL42AA-TR datasheet and PDF[edit]

RH5RL42AA-TR datasheet and PDF check from http://www.seekic.com OUTLINE The RH5RL Series are voltage regulator ICs with high accuracy output voltage and ultra-low quiescent current by CMOS process. Each of these ICs consists of a voltage reference unit, an error amplifier, a driver transistor, and resistors for setting output voltage. The output voltage is fixed with high accuracy. Three types of packages, TO-92, SOT-89 (Mini-power Mold), SOT-23-5 (Mini-mold), are available.


RH5RL42AA-RR RH5RL42AA-T1 RH5RL42AA-T2 RH5RL42AA-TL RH5RL42AA-TZ RH5RL52AA-RF RH5RL52AA-RR RH5RL52AA-T1

KM684002-17 datasheet description[edit]

ralated IC model M27C4002-12J1X M27C4002-12J6X M27C4002-12C6X M27C4002-12F KM684002-20 M38002-128 2025-6002-10 CM3002-15

http://www.seekic.com/

GENERAL DESCRIPTION

The KM684002 is a 4,194,304-bit high-speed Static Random Access Memory organized as 524,288 words by 8 bits. The KM684002 uses 8 common input and output lines and has an output enable pin which operates faster than address access time at read cycle. The device is fabricated using Samsung's advanced CMOS process and designed for high-speed circuit technology. It is particularly well suited for use in high-density high-speed system applications. The KM684002 is packaged in a 400 mil 36-pin plastic SOJ.

IC electronic 0002[edit]

0002 PDF download: http://www.seekic.com/

The MSK 0002 is a general purpose current amplifier. It is the industry wide replacement for the LH0002. The device is ideal for use with an operational amplifier in a closed loop configuration to increase current output. The MSK 0002 is designed with a symmetrical output stage that provides low output impedances to both the positive and negative portions of output pulses. The MSK 0002 is packaged in a hermetic 8 lead low profile T0-5 header and is specified over the full military temperature range.

MIC49300-0.9BR HDSP-3600-00000 MIC49500-0.9WR HDSP-4600-00000 M27C2001-12C6X M27C2001-12N6X CY7C1001-12PC CY7C1001-12VC

M27C512 datasheet[edit]

M27C512 datasheet http://www.seekic.com/

SUMMARY DESCRIPTION The M27C512 is a 512 Kbit EPROM offered in the two ranges UV (ultra violet erase) and OTP (one time programmable). It is ideally suited for applications where fast turn-around and pattern experimentation are important requirements and is organized as 65536 by 8 bits. The FDIP28W (window ceramic frit-seal package) has transparent lid which allows the user to expose the chip to ultraviolet light to erase the bit pattern. A new pattern can then be written to the device by following the programming procedure. For applications where the content is programmed only one time and erasure is not required, the M27C512 is offered in PDIP28, PLCC32 and TSOP28 (8 x 13.4 mm) packages. In addition to the standard versions, the packages are also available in Lead-free versions, in compliance with JEDEC Std J-STD-020B, the ST ECOPACK 7191395 Specification, and the RoHS (Restriction of Hazardous Substances) directive.

Microchip Technology 93LC66A[edit]

93LC66A datasheet and PDF check from

http://www.seekic.com/

93LC66A DESCRIPTION

The Microchip Technology Inc. 93LC66A/B are 4K-bit, low voltage serial Electrically Erasable PROMs. The device memory is configured as x8 (93LC66A) or x16 bits (93LC66B). Advanced CMOS technology makes these devices ideal for low power nonvolatile memory applications. The 93LC66A/B is available in standard 8-pin DIP, surface mount SOIC, and TSSOP packages. The 93LC66AX/BX are only offered in a 150-mil SOIC package.

33793 33742 33742S 33887 33888 datasheet[edit]

33793 3361 336EGW 33661 33702 33742 33742S 33887 33888 more detail http://www.seekic.com/

Distributed System Interface (DSI) Sensor Interface

The 33793 is a slave Distributed System Interface (DSI) device that is optimized as a sensor interface. The device contains circuits to power sensors such as accelerometers and to digitize the analog level from the sensor. The device is controlled by commands over the DSI bus and returns measured data over the bus.

Features • 4-Channel, 8-Bit Analog-to-Digital Converter (ADC) • 4 Pins Configurable as Analog or Logic Inputs or as Logic Outputs • Provides Regulated +5.0 V Output for Sensor Power from Bus • Additional High-Drive Logic Output • Undervoltage Fault Detection and Signaling • On-Board Clock (No External Elements Required) • Field-Programmable Address • Default and Field-Programmable as a DSI Daisy Chain Device • Recognizes Reverse Initialization for Open Bus Fault Tolerance • Detects Short to Battery on Bus Switch and Prevents Its Closure

3PMT75A 3PMT78A 3PMT8.0A 3PMT8.5A datasheet[edit]

more detail http://www.seekic.com

3PMT75A 3PMT78A 3PMT8.0A 3PMT8.5A 3PMT9.0A 3PMT90A 3PMT170A 3R1000R

3PMT75A description

These 1500 watt transient voltage suppressors offer power-handling capabilities only found in larger packages. They are most often used for protecting against transients from inductive switching environments or induced secondary lightning effects as found in lower surge levels of IEC61000-4-5. With very fast response times, they are also effective in protection from ESD or EFT. Powermite® package features include a full metallic bottom that eliminates the possibility of solder-flux entrapment during assembly. They also provide unique locking tab acting as an integral heat sink. With its very short terminations, parasitic inductance is minimized to reduce voltage overshoots during fast-rise-time transients

VNV35N07 VNW35NV04 VNW100N04 VNW50N04 VOP0300B[edit]

VNW50N04A datesheet

http://www.seekic.com

DESCRIPTION The VNW50N04A is a monolithic device made using SGS-THOMSON Vertical Intelligent Power M0 Technology, intended for replacement of standard power MOSFETS in DC to 50 KHz applications. Built-in thermal shut-down, linear current limitation and overvoltage clamp protect the chip in harsh enviroments. Fault feedback can be detected by monitoring the voltage at the input pin.

NX8566LE811-CC NX8566LE862-CC NX8566LE820-BC NX8566LE6074-CC datasheet[edit]

NX8566LE811-CC datasheet http://www.seekic.com

NX8566LE811-CC description

NEC's NX8564/8565/8566LE Series is an Electro-Absorption (EA) modulator integrated, 1550 nm Multiple Quantum Well (MQW) structured Distributed Feed-Back (DFB) laser diode. The module is capable of 2.5 Gb/s applications of over 360 km, 600 km, 240 km ultralong-reach and available for Dense Wavelength Division Multiplexing (DWDM) wavelengths based on ITU-T recommendations, enabling a wide range of applications.

2021-1310-00 2025-6001-06 2025-6002-10 datasheet[edit]

Available IC model 2021-1310-00 2025-6001-06 2025-6002-10 2SK2002-01MR 2025-6004-20 2SC5004-T1 2025-6005-06 2SC5005-T1 2025-6006-10 2025-6009-06 2025-6013-06 2SC5013-T1 2SC5013-T2 2025-6014-10 2SC5014-T1

Features

Flat Frequency Response Frequency Range: 0.5-18 GHz Multi-Octave Bandwidths Temperature Range: -54 to +125°C Meets MIL-E-5400 Environments

more detail from http://www.seekic.com

IDT54FCT646CTEB datasheet[edit]

IDT54FCT646CTEB datasheet more detail check from http://www.seekic.com

DESCRIPTION: The FCT646T/FCT2646T/FCT648T/FCT652T/2652T consist of a bus transceiver with 3-state D-type flip-flops and control circuitry arranged for multiplexed transmission of data directly from the data bus or from the internal storage registers. The FCT652T/FCT2652T utilize GAB and GBA signals to control the transceiver functions. The FCT646T/FCT2646T/FCT648T utilize the enable control (G) and direction (DIR) pins to control the transceiver functions. SAB and SBA control pins are provided to select either realtime or stored data transfer. The circuitry used for select control will eliminate the typical decoding glitch that occurs in a multiplexer during the transition between stored and realtime data. A LOW input level selects real-time data and a HIGH selects stored data. Data on the A or B data bus, or both, can be stored in the internal D flip-flops by LOW-to-HIGH transitions at the appropriate clock pins (CPAB or CPBA), regardless of the select or enable control pins. The FCT26xxT have balanced drive outputs with current limiting resistors. This offers low ground bounce, minimal undershoot and controlled output fall times-reducing the need for external series terminating resistors. FCT2xxxT parts are plug-in replacements for FCTxxxT parts.

PHP45NQ10T PHP3055 PHP3055E PHP30NQ15T datasheet[edit]

PHP45NQ10T PHP3055 PHP3055E PHP30NQ15T datasheet more detail check from

N-channel TrenchMOSÔ transistor PHB45NQ10T, PHP45NQ10T PHW45NQ10T

FEATURES

• ’Trench’ technology • Very low on-state resistance

• Fast switching • Low thermal resistance

GENERAL DESCRIPTION N-channel enhancement mode field-effect power transistor in a plastic envelope using ’trench’ technology. Applications:- • d.c. to d.c. converters • switched mode power supplies The PHP45NQ10T is supplied in the SOT78 (TO220AB) conventional leaded package. The PHB45NQ10T is supplied in the SOT404 (D2PAK) surface mounting package. The PHW45NQ10T is supplied in the SOT429 (TO247) conventional leaded package.

X9400WV24-2.7 X9400WS24I X9400WS24I-2.7 datasheet[edit]

X9400WV24-2.7 X9400WS24I X9400WS24I-2.7 datasheet download:

http://www.seekic.com

X9400 Low Noise/Low Power/SPI Bus

Quad Digitally Controlled Potentiometers (XDCP™) FEATURES• Four potentiometers per package • 64 resistor taps • SPI serial interface for write, read, and transfer operations of the potentiometer • Wiper resistance, 40Ω typical at 5V. • Four non-volatile data registers for each potentiometer • Non-volatile storage of multiple wiper position • Power-on recall. Loads saved wiper position on power-up. • Standby current < 1μA max • System VCC: 2.7V to 5.5V operation • Analog V+/V–: -5V to +5V • 10kΩ, 2.5kΩ End to end resistance • 100 yr. data retention • Endurance: 100,000 data changes per bit per register • Low power CMOS • 24-lead SOIC and 24-lead TSSOP

DESCRIPTION The X9400 integrates four digitally controlled potentiometers (XDCPs) on a monolithic CMOS integrated circuit. The digitally controlled potentiometer is implemented using 63 resistive elements in a series array. Between each element are tap points connected to the wiper terminal through switches. The position of the wiper on the array is controlled by the user through the SPI serial bus interface. Each potentiometer has associated with it a volatile Wiper Counter Register (WCR) and four nonvolatile Data Registers (DR0-3) that can be directly written to and read by the user. The contents of the WCR controls the position of the wiper on the resistor array through the switches. Power-up recalls the contents of DR0 to the WCR.The XDCP can be used as a three-terminal potentiometer or as a two-terminal variable resistor ina wide variety of applications including control, parameter adjustments, and signal processing.

MAX4071AUA MAX4061ETA MAX4062EUB datasheet and PDF[edit]

MAX4071AUA MAX4061ETA MAX4062EUB datasheet and PDF check from

http://www.seekic.com

General Description

The MAX4069–MAX4072 low-cost, bidirectional, highside,current-sense amplifiers are ideal for monitoring battery charge and discharge currents in notebooks, cell phones, and other portable equipment. They feature up to 24V input common-mode voltage range, low 100μA supply current (which drops to only 10μA in shutdown), and a total output error of less than 1.5%. The wide 1.35V to 24V input common-mode range is independent of the supply voltage, ensuring that the current-sense feedback remains accurate even when connected to a battery pack in deep discharge.To achieve maximum flexibility, an external current-sense resistor is used along with a Gain Select pin to choose either 50V/V or 100V/V. A single output pin continuously monitors the transition from charge to discharge and avoids the need for a separate polarity output. The MAX4070 contains an internal 2.5V reference. The charging current is represented by an output voltage from 2.5V to VCC, while discharge current is given from 2.5V to GND. The MAX4071 is similar, but with a reference voltage of 1.5V. The MAX4069 has an adjustable reference voltage, set by two external resistors. The MAX4072 has an input for an external reference. The MAX4069/MAX4071/MAX4072 operate from a 2.7V to 24V single supply. The MAX4070 operates from a 3.6V to 24V single supply. All devices are specified over the automotive operating temperature range, -40°C to+125°C. The MAX4070/MAX4071/MAX4072 are available in 8-pin μMAX and 8-pin thin QFN packages. The MAX4069 is available in a 10-pin μMAX package.


Applications

Notebook Fuel Gauging Smart-Battery Packs/Chargers Motor Control Power-Management Systems Cell-Phone Battery-Current Monitoring

Features

� Bidirectional, Compact, Current-Sense Solution � Total Output Error Less than 1.5% � Selectable Gain of 50V/V or 100V/V � Wide 1.35V to 24V Common-Mode Range Independent of Supply Voltage � 2.7V to 24V Single-Supply Operation � Internal Precision Reference Adjustable (MAX4069) 2.50V (MAX4070) 1.50V (MAX4071) � Low 100μA Supply Current � 10μA Supply Current in Shutdown � Available in Space-Saving Packages 8-Pin Thin QFN (MAX4070/MAX4071/MAX4072) 8-Pin μMAX (MAX4070/MAX4071MAX4072) 10-Pin μMAX (MAX4069)

LH75401 datasheet and pdf[edit]

LH75401 datasheet more detail check from

http://www.seekic.com

DESCRIPTION

The SHARP BlueStreak LH75400/01/10/11 family consists of four low-cost 16/32-bit System-on-Chip (SoC) devices. • LH75401 — contains the superset of features. • LH75411 — similar to LH75401, without CAN 2.0B. • LH75400 — similar to LH75401, but with a Grayscale LCDC only. • LH75410 — similar to LH75400, without CAN 2.0B.

COMMON FEATURES

• Highly Integrated System-on-Chip • ARM7TDMI-S™ Core • High Performance (70 MHz CPU Speed) – Internal PLL Driven or External Clock Driven – Crystal Oscillator/Internal PLL Can Operate with Input Frequency Range of 14 MHz to 20 MHz • 32KB On-chip SRAM – 16KB Tightly Coupled Memory (TCM) SRAM – 16KB Internal SRAM • Clock and Power Management – Low Power Modes: Standby, Sleep, Stop • Eight Channel, 10-bit Analog-to-Digital Converter • Integrated Touch Screen Controller • Serial interfaces – Two 16C550-type UARTs supporting baud rates up to 921,600 baud (requires crystal frequency of 14.756 MHz). – One 82510-type UART supporting baud rates up to 3,225,600 baud (requires a system clock of 70 MHz). • Synchronous Serial Port – Motorola SPI™ – National Semiconductor Microwire™ – Texas Instruments SSI • Real-Time Clock (RTC) • Three Counter/Timers – Capture/Compare/PWM Compatibility – Watchdog Timer (WDT) • Low-Voltage Detecto • JTAG Debug Interface and Boundary Scan • Single 3.3 V Supply • 5 V Tolerant Inputs • 144-pin LQFP Package • -40°C to +85°C Operating Temperature Unique Features of the LH75401 • Color and Grayscale Liquid Crystal Display (LCD) Controller – 12-bit (4,096) Direct Mode Color, up to VGA – 8-bit (256) Direct or Palletized Color, up to SVGA – 4-bit (16) Direct Mode Color/Grayscale, up to XGA – 12-bit Video Bus – Supports STN, TFT, HR-TFT, and AD-TFT Displays. • CAN Controller that supports CAN version 2.0B. Unique Features of the LH75411 • Color and Grayscale LCD Controller (LCDC) – 12-bit (4,096) Direct Mode Color, up to VGA – 8-bit (256) Direct or Palletized Color, up to SVGA – 4-bit (16) Direct Mode Color/Grayscale, up to XGA – 12-bit Video Bus – Supports STN, TFT, HR-TFT, and AD-TFT Displays. Unique Features of the LH75400 • Grayscale LCDC – 4-bit (16 Level) Grayscale, up to XGA – 8-bit Video Bus – Supports STN Displays. • Controller Area Network (CAN) Controller that supports CAN version 2.0B. Unique Features of the LH75410 • Grayscale LCDC – 4-bit (16 Level) Grayscale, up to XGA – 8-bit Video Bus – Supports STN Displays.

96L02 9602FMQB 9601DMQB datasheet[edit]

96L02 9602FMQB 9601DMQB datasheet more detail check from http://www.seekic.com 96L02/DM96L02 Dual Retriggerable Resettable Monostable Multivibrator

General Description

The 96L02 is a dual TTL monostable multivibrator with trigger mode selection, reset capability, rapid recovery, internally compensated reference levels and high speed capability. Output pulse duration and accuracy depend on external timing components, and are therefore under user control for each application. It is well suited for a broad variety of applications, including pulse delay generators, square wave generators, long delay timers, pulse absence detectors, frequency detectors, clock pulse generators and fixed-frequency dividers. Each input is provided with a clamp diode to limit undershoot and minimize ringing induced by fast fall times acting on system wiring impedances.

Features

Y Retriggerable, 0% to 100% duty cycle Y DC level triggering, insensitive to transition times Y Leading or trailing-edge triggering Y Complementary outputs with active pull-ups Y Pulse width compensation for DVCC and DTA Y 50 ns to % output pulse width range Y Optional retrigger lock-out capability Y Resettable, for interrupt operations

DS1230Y-100 datasheet[edit]

DS1230Y-100 datasheet download check from

http://www.seekic.com/

FEATURES

� 10 years minimum data retention in the absence of external power � Data is automatically protected during power loss � Replaces 32k x 8 volatile static RAM, EEPROM or Flash memory � Unlimited write cycles � Low-power CMOS � Read and write access times as fast as 70 ns � Lithium energy source is electrically disconnected to retain freshness until power is applied for the first time � Full ±10% VCC operating range (DS1230Y) � Optional ±5% VCC operating range (DS1230AB) � Optional industrial temperature range of -40°C to +85°C, designated IND � JEDEC standard 28-pin DIP package � New PowerCap Module (PCM) package - Directly surface-mountable module - Replaceable snap-on PowerCap provides lithium backup battery - Standardized pinout for all nonvolatile SRAM products - Detachment feature on PowerCap allows easy removal using a regular screwdriver

DESCRIPTION

The DS1230 256k Nonvolatile SRAMs are 262,144-bit, fully static, nonvolatile SRAMs organized as 32,768 words by 8 bits. Each NV SRAM has a self-contained lithium energy source and control circuitry which constantly monitors VCC for an out-of-tolerance condition. When such a condition occurs, the lithium energy source is automatically switched on and write protection is unconditionally enabled to prevent data corruption. DIP-package DS1230 devices can be used in place of existing 32k x 8 static RAMs directly conforming to the popular bytewide 28-pin DIP standard. The DIP devices also match the pinout of 28256 EEPROMs, allowing direct substitution while enhancing performance. DS1230 devices in the Low Profile Module package are specifically designed for surface-mount applications. There is no limit on the number of write cycles that can be executed and no additional support circuitry is required for microprocessor interfacing.

TDA16888 TDA16888G datasheet[edit]

TDA16888 TDA16888G datasheet more detail check from http://www.seekic.com/

PFC Section

– IEC 1000-3 compliant – Additional operation mode as auxiliary power supply – Fast, soft switching totem pole gate drive (1 A) – Dual loop control (average current and voltage sensing) – Leading edge triggered pulse width modulation – Peak current limitation – Topologies of PFC preconverter are boost or flyback – Continuous/discontinuous mode possible – 94% maximum duty cycle

PWM Section – Improved current mode control – Fast, soft switching totem pole gate drive (1 A) – Soft-start management – Trailing edge triggered pulse width modulation – Topologies of PWM converter are feed forward or flyback – 50% maximum duty cycle to prevent transformer saturation – fPWM = fPFC

M57962L datasheet[edit]

M57962L datasheet more detail check from

http://www.seekic.com

Hybrid Integrated Circuit For Driving IGBT Modules

Description:

M57962L is a hybrid integrated circuit designed for driving n-channel IGBT modules in any gate amplifier application. This device operates as an isolation amplifier for these modules and provides the required electrical isolation between the input and output with an opto-coupler. Short circuit protection is provided by a built in desaturation detector. A fault signal is provided if the short circuit protection is activated.

Features:

u Built in high CMRR optocoupler (VCMR : Typical 30kV/ms, Min. 15kV/ms) u Electrical Isolation between input and output with opto-couplers (Viso = 2500, VRMS for 1 min.) u TTL compatible input interface u Two supply drive topology u Built in short circuit protection circuit with a pin for fault output

Application:

To drive IGBT modules for inverter,AC Servo systems, UPS, CVCF inverter, and welding applications. Recommended Modules: VCES = 600V Series (up to 400A Class) VCES = 1200V Series (up to 200A Class) VCES = 1400V Series (up to 200A Class)

ADDAC80N ADDAC80NCBIV ADDAC80N-CBI-V datasheet and PDF[edit]

ADDAC80N ADDAC80NCBIV ADDAC80N-CBI-V datasheet and PDF check from

http://www.seekic.com/newstock/ADDAC80N,ADDAC80NCBIV,ADDAC80N-CBI-V.html

GENERAL DESCRIPTION

The ADD8504, ADD8505, and ADD8506 are 4-, 5-, and 6-channel LCD gamma reference buffers designed to drive column driver gamma inputs in line inversion panels. Each buffer channel has an A/B input to select between two gamma voltage curves. These buffer channels drive the resistor ladders of LCD column drivers for gamma correction. The ADD8504/ADD8505/ADD8506 outputs have high slew rates and output drives that increase the stability of the reference ladder, resulting in optimal gray scale and visual performance.

The ADD8504/ADD8505/ADD8506 are specified over the −40°C to +105°C temperature range. They are available, respectively, in 16-, 20-, and 24-lead thin shrink small outline (TSSOP), surface-mount, Pb-free packages.

2SB1689 2SB1689T106 2SB169 datasheet and pdf[edit]

2SB1689 2SB1689T106 2SB169 datasheet and pdf more detail check from

http://www.seekic.com/newstock/2SB1689,2SB1689T106,2SB169.html

2SB621, 2SB621A Silicon PNP epitaxial planer type For low-frequency output amplification Complementary to 2SD592 and 2SD592A

Features

Low collector to emitter saturation voltage VCE(sat).
High transition frequency fT.

The 310-021001-001 Datasheet[edit]

The model 310-021001-001 is a spdt switch.Now we give you some information about the features.There are six features as follows.The first one is that it is a reflective SPDT switch.The second one is that it has wide bandwidth which is from 100 MHz to 22 GHz.The third one is that it has fast switching speed which is 100 ns typical.The fourth one is that it has a integral TTL driver.The fifth one is that the operating temperature is from -55 ℃ to + 85 ℃.The sixth one is that the environmental screening is available.
     You have to get some detail information about the maximum ratings if you want to purchase the product.It has five maximum ratings.The first one is about ambient operating temperature which ranges from -55 ℃ to + 100 ℃.The second one is about the storage temperature which ranges from  -55℃ to + 100 ℃.The third one is that the operating case temperature is + 125 ℃.The fourth one is that the DC voltage is  + 6.0 / -15V.The fifth one is that the continuous RF input power is +30 dBm.

more information from www.ChinaICMart.com and www.seekic.com

30CTH03PbF Datasheet[edit]

Description:

     The planar structure and the platinum doped life time control guarantee the best overall performance,ruggedness and reliability characteristics.The 30CTH03PbF are intended for use in the output rectification stage of SMPS,UPS,DC-DC converters as well as freewheeling diodes in low voltage inverters and chopper motor drives.Their extremely optimized stored charge and low recovery current minimize the switching losses and reduce over dissipation in the switching element and snubbers.Edited by (http://www.seekic.com/icdata/30CTH03PbF.html),the leading IC purchasers' best choice of platform for one-stop valued service!
     The 30CTH03PbF have five features.The first one is that it is designed with hyperfast recovery time.The sencond one is about low forward voltage drop.The third one is about low leakage current.The fourth one is that the 30CTH03PbF allows for reliable operation up to 175℃ junction temperature.The last one is about lead-free("PbF" suffix).
     The 30CTH03PbF have some absolute maximum ratings.The maximum of VRRM which means peak repetitive reverse voltage is 300V.The maximum of IF(AV) which means average rectified forward current is 15A per diode at Tc=153℃ and 30A per device.The maximum of IFSM which means non repetitive peak surge current is 150A at Tj=25℃.The maximum of Tj,TSTG which means operating junction and storage temperatures is from -65 to 175℃.
     The following is about its thermal-mechanical characteristics.The maximum of Tj which means junction temperature is 175℃.The minimum of Tstg which means storage temperature is -65℃ and the maximum of it is 175℃.The maximum of RthJC which means thermal resistance and junction to case per diode is 1.4 ℃/W.