Toaster oven

From OpenCircuits
Revision as of 10:06, 4 February 2012 by DavidCary (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Toaster oven reflow

Toaster oven reflowing:

To measure temperatures close to the melting point of solder, some people use:

  • visually watch for the solder to turn from "matte" to "shiny"
  • temperature indicator stick
  • pyrometric cone
  • thermocouple (type K seems to be the lowest-cost thermocouple and entirely adequate)

Some people recommend "IR ovens" such as the black and decker lightwave oven.


Some people claim that electric skillets are better than toaster ovens for reflowing PCBs full of electronic components.

External links

Hello, I bought a Silicon Horizon PID TechFX 3.0 controller, it worked three times and then failed. Since I use a ground strap and a grounded antistatic mat, I am fairly certain that I did not ESD damage the controller during construction. Couple that with the fact that repeated e-mails to Silicon Horizon regarding the matter did not elicit cogent response or replies, and then two weeks later, Corvet123's (used to post on SparkFun.com's website), website posted this message, "We are not out of business, we are reorganizing, Silicon Horizon will return in 2 quarters". Well? A couple of weeks later, their website disappeared.

My beef with them is two fold, prior to purchase, I contacted Corvette123 (own/designer of the TechFX controller/Silicon Horizon) and chatted with him. He told me that source code and the schematics for the controller was freely available would be located on the CDrom which is shipped with the controller. Well, those items were not on the CDrom and now the controller is dead, I can't even repair it unless I reverse engineer the product.

zebra

Personal tools
Namespaces

Variants
Actions
Navigation
Toolbox