Techniques

From OpenCircuits
Jump to navigation Jump to search

Circuit board techniques

Toner transfer, Press-and-Peel(tm), photoresist, Sharpie, nail polish.

Ferric Chloride vs. Ammonium Persulfate.

How to dispose of etchant.

Commercial PCB fabrication. Vendors.

?

Construction techniques

"solderless breadboard" is the fastest construction technique ... but it is very fragile.

Dead bug style. Manhattan style. Veroboard. Perfboard and point-to-point. Solderless protoboard.

traditional perfboards with holes on a 0.1" grid (2.54 mm grid) come in 3 styles:

  • just holes in insulator
  • little donuts of copper around each hole, usually plated-through (See this robot controller for an example)
  • solid sheets of copper, usually with a little donut gap around each hole.

The best one to use is ...

With these perfboards, there's 2 ways to connect wires so they don't fall off:

  • wire wrap, or
  • solder.

Soldering techniques

How to use a soldering iron. What is flux for?

Hot air soldering. Huh?

Hobby replacements for commercial reflow: skillet soldering, toaster-oven soldering, soldering using an oil lamp or candle.

How to fix mistakes: solder braid, solder sucker.

How to deal with fine pitch SMT devices.

How to deal with big, heatsucking components.


Other techniques

How to get started with a multimeter

How to use an oscilloscope