Editing Smart Terminal Parameter Examples

= What/Why the Parameter File =

A lot of the behaviour of the terminal is controlled by the file '''parameters.py'''.  Different projects of mine require different parameters.  There are several way to achieve this.  The simplest to understand might be to have a different files for each project.  You can do this if you want, starting from my parameter file.  You can also use a secondary parameter file that overrides the settings in the first file.  But right now I am working with a somewhat different method that seems easier to manage.  This is the method in the supplied parameter file and the one that I will explain here.  The parameter file is heavily commented and these comments should be read if you have questions.  You can also search other files for parameters.xxx where xxx is the name of the parameter you are investigating.

In the __init__ method after a couple of required lines that help hold the application there is a call to self.default_terminal_mode().  This subroutine sets a ton of parameters and this is enough to make the terminal run nicely.  See the comments in the subroutine for more info.

I then have a call to a short ( so far ) subroutine self.computer_name_tweaks(  )   This subroutine uses the already set parameter  computername to tweak a few settings depending on the computer's name.  
this makes it easy for me to change the default parameters setting based on the computer I am using to run the program.  Thus I can move the program around without changing the parameter file. 

Finally I make a call to a subroutine like:  well_monitor_mode().  This is the file for an arduino project that monitors my water well pressure.  This is a pretty complicated set up, because of the database access in the well monitor.  For this documentation I will do a subroutine called tutorial_example_mode() which make the most basic changes from the default mode.

= tutorial_example_mode() =

Read the comments, they are pretty clear:

<pre>

    def tutorial_example_mode( self, ):
        """
        this mode does not do anything usefull except illustrate a simple "mode subroutine"
        """
        self.mode              = "TutorialExample"  # this name will appear in the title of the window
                                                    # to help keep track of which mode you are using

        self.baudrate          = 19200              # changes the baucrate from the default to 19200

        # the send_ctrls is a list of 3 valued tuples
        # for each item in the list you will have a "send button", a button that will send the contents of
        # the data entry field to the right of it to your comm port.
        # the first item of the tuple is a sting whose test will be on the button
        # the second is a string with the initial or default value for the data entry field 
        # the third is a boolean, True make the data entry field editable, otherwise it is protected from edit
        self.send_ctrls = [
                # text                      cmd               can edit
                ( "Send",                    "",              True ),
                ( "Send",                    "",              True ),
                ( "Different Title",         "default",       True ),
                ( "More Different",          "yes different", True ),
                ]
        # you may get extra buttons with default values to fill the space

</pre>

= Some of the Parameters =

Search in the code for more details on these parameters

* '''logger_id''':  the id used in the logging file 
* '''pylogging_fn''': file name for the python logging
* '''logging_level''':  python logging level of severity for message to be logged to the logging file      
* '''win_geometry''':   the size of the window when first opened
* '''ex_editor''':  name of an executable file used to edit files related to the terminal   

== Comm Related ==

* '''port_list''':  a list of ports that the automatic connect routine will use to find a connection
* '''port''''''Bold text'''               = "COM3"   #
* '''baudrate'''          = 19200  # 9600
       
* '''serialAppend'''      = "\r\n"        # "\r\n" is car. return line feed.
        

* ''get_arduino_version'''    = "v"              # sent out port to get arduino version
* '''arduino_version'''        = "GreenHouse"     # should be part of the string th

* '''arduino_connect_delay'''      = 10     # may not be implemented yet


* '''gui_sends'''         = 15         # number of send frames in the gui beware if 0

* '''max_send_rows'''     = 3         # the send areas are added in columns this many rows long, then a new
* '''default_scroll'''    = 1        # 1 auto scroll the recieve area, else 0

== Extended Processing ==

If you want to add some of your own GUI and processing elements to the terminal the next parameters add a module name and class name that will be loaded into the application 

*'''ext_processing_module''':  module name      
*'''ext_processing_class''':   class name 


== Automatically Set ==

*'''our_os''': "win32" if your are running windows

        
== For the Second Thread ==

* '''queue_length'''         = 20
* '''queue_sleep'''          = .1

# ----------  self.start_helper_function    = gh_processing.GHProcessing.find_and_monitor_arduino
start_helper_function    = "find_and_monitor_arduino"    # now using eval, may need to do same with args,
start_helper_args        = ( )     # () empty   ( "x", ) one element
start_helper_delay       = 0      # in seconds  must be > 0 to start

# This is how often in ms to poll the comm port, faster makes it more responsive, uses
# more resources
* '''gt_delta_t'''        = 50               # in ms --   lowest I have tried is 10 ms, could not see cpu load

* '''ht_delta_t'''        = 100/1000.        # TIME FOR helper thread polling this uses time so in seconds, sorry for confusion

self.send_array_mod    = 5                # see task, send array

# ?? not implemented should it be?
block_port_closed = False            # block sending if port is closed   # *todo  -- or some warning

== Appearance ==


* '''id_color''': color for an "ID pane" just below the title bar of the window
* '''id_height''': height of the "ID pane" if 0 there is no pane
* '''bk_color'''          = "blue"   # color for the background, you can match the id color or use a neutral color like gray
* '''icon''':  name of icon for the application

= Obsolete Doc, Remove soon  =

*Sets part of the title of the application.
*Sets the communications parameters.  Sometimes a little confusing about port names.  The arduino IDE sometimes is better at finding the name, check it.  Also use the <Ports> button on the GUI.  On the apple we have found from <Ports> ('/dev/tty.usbmodem1411', True) and in the parameter file using '''self.port = "/dev/tty.usbmodem1411"''' gave a good connection.   Sometimes a reboot will result in a change of the port name.
*Specifies a program for file editing.
*Sets the size of the application.
*Defaults data to be sent.
*Change number of send areas.
*More see the file.

= An Intermediate Difficulty Parameter Example =

*This is based on the file ..../smart_terminal/example_parms/parameters_intermediate.py.
*The parameters include all the basic parameters plus ones to support a greenhouse arduino monitor.
*You should also look at the arduino application and the SmartTerminal extension to support it [[GreenHouse Monitor Program]] as they are closely related.
*Well commented read the file!

== What thisParameter File Does ==

*Everything the basic file does plus the following.
*The SmartTerminal needs some additional code to support the GreenHouse arduino program.  The code is '''gh_csv_processing.GHCSVProcessing'''.  To cause this to be loaded we have the following:

<pre>
        ....
        elif self.mode == "GreenHouseCSV":
            # this is the module and class name of another class that will be built to support
            # automatic processing of a anduino monitoring a greenhouse
            # this also adds buttons to the gui
            self.ext_processing_module      = "gh_csv_processing"
            self.ext_processing_class       = "GHCSVProcessing"

</pre>

In the code above we use the "meta" parameter self.mode to make it easy to switch on/off these settings ( by changing self.mode ).

*The parameter file can be used to customize the send buttons, for the GreenHouse adaptation I use a more advanced version of these settings:
<pre>
     self.send_ctrls        = [ ( "Version", "v", False ),  ( "Help", "h", False ), "simple default text" ]
</pre>

In this case instead of just changing the default values of the string to be sent, I have also changed the button text and the editablity of the send field.  This is done by using a tuple for any given button in the form ( string_button_text, string_send_default, editablity 

*The terminal can probe the communications ports, find a port that opens, send a string to the arduino, and look for a particular response to verify that it is connected to the desired port.  This takes the following settings:

<pre>
        self.get_arduino_version    = "v"              # sent out port to get arduino version
        self.arduino_version        = "GreenHouse"     # should be part of the string the arduino responds with match with the arduino code
</pre>


*Another setting is required for the probe of communications ports.  Here it is ( set up for automatic switching between operating systems )

<pre>

        # used to probe around for ports
        if  self.os_win:
            self.port_list  =  [ "COM11", "COM12", "COM13", "COM14", "COM15", "COM16", "COM17", ]
        else:
            self.port_list  =  [ "/dev/ttyUSB0", "/dev/ttyUSB1", "/dev/ttyUSB2", "/dev/ttyACM0", "/dev/ttyACM1", "/dev/ttyACM2", ]

</pre>

* Data is saved to a csv file, but what is the file name.  Here is its setting:
<pre>
        # for saving csv data 
        self.csv_filename   = "csv_data.csv"
</pre>

== even more ==


[[Category:SmartTerminal]] [[Category:Arduino/RaspberryPi]]
@@ Line 1: / Line 1: @@
-= What/Why/How the Parameter File =
+= What/Why the Parameter File =
-A lot of the behavior of the terminal is controlled by the file '''parameters.py'''.  Different projects of mine require different parameters.  The first parameters that might spring to mind are the port and baud rate for the terminal.  But the parameter file can change so much more: some are simple like adding a colored band to the terminal ( useful if you have more than one terminal running at a time ) to adding whole new modules that modify the graphical user interface ( GUI ) and add automatic processing.  While this file has the basic structure of a asci text file, you should keep in mind that it is an executable Python file.  This means it is programmatic, you can use any Python you want ( pretty much ) but try to limit yourself to setting the value of instance variables in the parameter object.
+A lot of the behaviour of the terminal is controlled by the file '''parameters.py'''.  Different projects of mine require different parameters.  There are several way to achieve this.  The simplest to understand might be to have a different files for each project.  You can do this if you want, starting from my parameter file.  You can also use a secondary parameter file that overrides the settings in the first file.  But right now I am working with a somewhat different method that seems easier to manage.  This is the method in the supplied parameter file and the one that I will explain here.  The parameter file is heavily commented and these comments should be read if you have questions.  You can also search other files for parameters.xxx where xxx is the name of the parameter you are investigating.
-More information on this approach to configuration in: [[Configuration Files For Python]].
+In the __init__ method after a couple of required lines that help hold the application there is a call to self.default_terminal_mode().  This subroutine sets a ton of parameters and this is enough to make the terminal run nicely.  See the comments in the subroutine for more info.
-== Different Approaches ==
+I then have a call to a short ( so far ) subroutine self.computer_name_tweaks(  )   This subroutine uses the already set parameter  computername to tweak a few settings depending on the computer's name.
+this makes it easy for me to change the default parameters setting based on the computer I am using to run the program.  Thus I can move the program around without changing the parameter file.
-*  To start with you can just run with the parameter file as shipped.  This gives a reasonable terminal that runs fine, but probably will not run with the baud rate and comm port that you desire, so almost for sure you will need to adjust these.  There are lines near the top of the parameter file to do this.  For more info see the section below.
+Finally I make a call to a subroutine like:  well_monitor_mode().  This is the file for an arduino project that monitors my water well pressure.  This is a pretty complicated set up, because of the database access in the well monitor.  For this documentation I will do a subroutine called tutorial_example_mode() which make the most basic changes from the default mode.
-* Another method is to use different parameter files for different projects.  These might be copied into the smart terminal directory when you want to use them.  Works fine but is cumbersome.  Start from my file and modify. I do not recommend this approach, but you may want to do it.
+= tutorial_example_mode() =
-* You can also use a secondary parameter file that overrides the settings in the first file.  This is great if you want to run 2 copies of the terminal.  Which secondary parameter file is used is controlled from the command line.  For more info see the section below. ( coming soon )
+Read the comments, they are pretty clear:
-* The subroutine method.  This is what I recommend for most uses.  It is easy to manage and easy to switch between parameter sets.  This is the method in the supplied parameter file and the one that I will use for may discussion of how the parameter file works in general.  The parameter file is heavily commented and these comments should be read if you have questions.  You can also search other files for parameters.xxx where xxx is the name of the parameter you are investigating.
-== How to Edit the Parameter File ==
-Yous can use any editor you want ( for text type file ).  One warning, however, is not to use an editor that inserts tab characters, tabs are ok if they are converted to spaces but not otherwise.  Use your Python editor, that should be fine.  For an external editor I use notepad++ on windows but make sure you use the tab to spaces conversion option ( google it ).  The parameter file can be set up ( .ex_editor: for example self.ex_editor  =  r"leafpad" # linux editor ) so that a button <Edit Parms> on the GUI will open the parameter file in the editor.  After saving the file you can get a very fast restart of the app with the new parameter using the <Restart> button.
-= Structure of the Default Parameter File =
-In the '''__init__''' method after a couple of required lines that help hold the application together there is a call to '''self.default_terminal_mode()'''.  This subroutine sets a ton of parameters
-and this is enough to make the terminal run nicely.  See the comments in the subroutine for more info.
-I then have a call to a short ( so far ) subroutine called '''os_tweaks( )'''.  This subroutine uses a parameter identifying the OS you are running on to tweak some of the settings.  These may be useful to you or not.  Change them if you want.
-In a similar way there is a subroutine called '''self.computer_name_tweaks(  )'''   This subroutine uses the already/automatically set parameter  '''computername''' to tweak a few settings depending on the computer's name. This makes it easy for me to change the default parameters setting based on the computer I am using to run the program.  Thus I can move the program around without changing the parameter file. These setting, as shipped, are probably not useful to you, but they may be useful as an example.
-Finally there is a list of calls to subroutines, typically each one is for a different type of setup or mode, all but one should be commented out.  So I might make a call to a subroutine like:  '''self.well_monitor_mode()'''.  This is the mode for an arduino/python project that monitors my water well pressure.  It is a pretty complicated set up, because of the database access in the well monitor.  For this documentation I will do a subroutine called '''tutorial_example_mode()''' which make the most basic changes from the default mode.
-= Subroutine Method =
-All the rest of the documentation will refer to this method of structuring the parameter.py file.  You could instead just have a separate parameter file for each application/mode that just ran from top to bottom.  I have found this method more useful.
-== tutorial_example_mode() ==
-This mode just changes the default baudrate and the buttons/default data for the button.  Read the comments ( here or better in the actual file ) , they are pretty clear:
 <pre>
@@ Line 66: / Line 42: @@
 </pre>
-= Another example mode =
+= Some of the Parameters =
-make it a bit more complicated.  Still needs to be written.
-= Reference/Summary for Some Values =
-Instance variables and their meanings ( in code use self.xxxx as they are instance variables ).  This reference is not detailed/exhaustive, for that you must use the supplied parameters.py and its comments.
-== Overview ==
+Search in the code for more details on these parameters
 * '''logger_id''':  the id used in the logging file
@@ Line 85: / Line 55: @@
 * '''port_list''':  a list of ports that the automatic connect routine will use to find a connection
-* '''port''':  default port to open
+* '''port''''''Bold text'''               = "COM3"   #
-* '''baudrate''': comm port baudrate
+* '''baudrate'''          = 19200  # 9600
-* '''serialAppend''':  characters ( like cr and lf ) placed at the end of transmitted strings
+* '''serialAppend'''      = "\r\n"        # "\r\n" is car. return line feed.
-* '''auto_open'''         = False       # true to open port on start up  #  !! *todo
-* '''prefix_send''':  a prefix shown in the "receive area" to show that the data has been sent
-* '''prefix_rec''':  a prefix shown in the "receive area" to show that the data has been recieved
-* '''prefix_info''':   a prefix shown in the "receive area" prefix for informational messages
-* '''echoSend''':  locally echo the sent characters
+* ''get_arduino_version'''    = "v"              # sent out port to get arduino version
-* '''get_arduino_version''': string sent to get arduino to respond with its version string
 * '''arduino_version'''        = "GreenHouse"     # should be part of the string th
 * '''arduino_connect_delay'''      = 10     # may not be implemented yet
 * '''gui_sends'''         = 15         # number of send frames in the gui beware if 0
 * '''max_send_rows'''     = 3         # the send areas are added in columns this many rows long, then a new
-* '''default_scroll'''    = 1        # 1 auto scroll the receive area, else 0
+* '''default_scroll'''    = 1        # 1 auto scroll the recieve area, else 0
 == Extended Processing ==
@@ Line 112: / Line 77: @@
 *'''ext_processing_module''':  module name
 *'''ext_processing_class''':   class name
 == Automatically Set ==
-*'''our_os''': "win32" if your are running windows -- used by os_tweaks().
+*'''our_os''': "win32" if your are running windows
-*'''computername'''  the name of your computer if available ( it is on windows, linux ?? ) used by computer_name_tweaks().
-== For the Second Thread, the Helper Thread ==
+== For the Second Thread ==
 * '''queue_length'''         = 20
 * '''queue_sleep'''          = .1
-<!-----------
-this cannot bee seen
 # ----------  self.start_helper_function    = gh_processing.GHProcessing.find_and_monitor_arduino
@@ Line 146: / Line 106: @@
 block_port_closed = False            # block sending if port is closed   # *todo  -- or some warning
+== Appearance ==
-------------->
-== Appearance ==
 * '''id_color''': color for an "ID pane" just below the title bar of the window
@@ Line 155: / Line 113: @@
 * '''bk_color'''          = "blue"   # color for the background, you can match the id color or use a neutral color like gray
 * '''icon''':  name of icon for the application
-* '''mode''' name for the mode of the SmartTerminal, used in the title of the SmartTerminal window and may be use in code.
-* '''self.win_geometry''' a string that specifies the initial size of the SmartTerminal window
-<!-----------
+= Obsolete Doc, Remove soon  =
+*Sets part of the title of the application.
+*Sets the communications parameters.  Sometimes a little confusing about port names.  The arduino IDE sometimes is better at finding the name, check it.  Also use the <Ports> button on the GUI.  On the apple we have found from <Ports> ('/dev/tty.usbmodem1411', True) and in the parameter file using '''self.port = "/dev/tty.usbmodem1411"''' gave a good connection.   Sometimes a reboot will result in a change of the port name.
+*Specifies a program for file editing.
+*Sets the size of the application.
+*Defaults data to be sent.
+*Change number of send areas.
+*More see the file.
-Sets the communications parameters. Sometimes a little confusing about port names. The arduino IDE sometimes is better at finding the name, check it. Also use the <Ports> button on the GUI. On the apple we have found from <Ports> ('/dev/tty.usbmodem1411', True) and in the parameter file using self.port = "/dev/tty.usbmodem1411" gave a good connection. Sometimes a reboot will result in a change of the port name.
+= An Intermediate Difficulty Parameter Example =
-Specifies a program for file editing.
-Defaults data to be sent.
-Change number of send areas.
-this cannot bee seen
+*This is based on the file ..../smart_terminal/example_parms/parameters_intermediate.py.
-== More on Particular Parameters ==
+*The parameters include all the basic parameters plus ones to support a greenhouse arduino monitor.
+*You should also look at the arduino application and the SmartTerminal extension to support it [[GreenHouse Monitor Program]] as they are closely related.
+*Well commented read the file!
-=== Parm 1 ===
+== What thisParameter File Does ==
-=== Parm 2 ===
-this cannot bee seen
-------------->
-= Using a Second Parameter File  =
+*Everything the basic file does plus the following.
+*The SmartTerminal needs some additional code to support the GreenHouse arduino program.  The code is '''gh_csv_processing.GHCSVProcessing'''.  To cause this to be loaded we have the following:
-If you running 2 instances of the SmartTerminal you probably do not want to run with the same parameters ( they would use the same comm port ).  So if they run with different parameter files they can be quite different.  The idea here is they start with the same parameter file, parameters.py and are then extended with a second file ( say parameters_a.py or any other name you wish ).  This is done by using a command line.  For example:  '''python smart_terminal.py    parameters=paramaters_a'''
+<pre>
+        ....
+        elif self.mode == "GreenHouseCSV":
-The difference in this file is the parameters are not self.xx but parameters.xx.  Else it is pretty much the same.  See the example file parameters_a.py.
+            # this is the module and class name of another class that will be built to support
+            # automatic processing of a anduino monitoring a greenhouse
-<!-----------
+            # this also adds buttons to the gui
-this cannot bee seen
+            self.ext_processing_module      = "gh_csv_processing"
+            self.ext_processing_class       = "GHCSVProcessing"
+</pre>
+In the code above we use the "meta" parameter self.mode to make it easy to switch on/off these settings ( by changing self.mode ).
-= delete soon =
+*The parameter file can be used to customize the send buttons, for the GreenHouse adaptation I use a more advanced version of these settings:
-*You should also look at the arduino application and the SmartTerminal extension to support it [[GreenHouse Monitor Program]] as they are closely related.
-*Well commented read the file!
-== What thisParameter File Does ==
 <pre>
       self.send_ctrls        = [ ( "Version", "v", False ),  ( "Help", "h", False ), "simple default text" ]
@@ Line 206: / Line 158: @@
 *The terminal can probe the communications ports, find a port that opens, send a string to the arduino, and look for a particular response to verify that it is connected to the desired port.  This takes the following settings:
+<pre>
+        self.get_arduino_version    = "v"              # sent out port to get arduino version
+        self.arduino_version        = "GreenHouse"     # should be part of the string the arduino responds with match with the arduino code
+</pre>
 *Another setting is required for the probe of communications ports.  Here it is ( set up for automatic switching between operating systems )
+<pre>
+        # used to probe around for ports
+        if  self.os_win:
+            self.port_list  =  [ "COM11", "COM12", "COM13", "COM14", "COM15", "COM16", "COM17", ]
+        else:
+            self.port_list  =  [ "/dev/ttyUSB0", "/dev/ttyUSB1", "/dev/ttyUSB2", "/dev/ttyACM0", "/dev/ttyACM1", "/dev/ttyACM2", ]
+</pre>
 * Data is saved to a csv file, but what is the file name.  Here is its setting:
@@ Line 218: / Line 182: @@
 </pre>
-------------->
+== even more ==
-[[Category:SmartTerminal]] [[Category:Arduino/RaspberryPi]] [[Category:Python]]
+[[Category:SmartTerminal]] [[Category:Arduino/RaspberryPi]]