Difference between revisions of "Raspberry Pi Mounting Platform and Bracket Pictures"

From OpenCircuits
Jump to navigation Jump to search
Line 32: Line 32:
 
[[Image:pp10.JPG|500px]]
 
[[Image:pp10.JPG|500px]]
 
[[Image:pp12.JPG|500px]]
 
[[Image:pp12.JPG|500px]]
 +
 +
= Large Platform No Componets =
 +
This is a large platform with a mounting bracket.  It is bad because the normal top mount
 +
will cover the Raspberry Pi pins.  Still can be used, Access the pins another way, cut into it
 +
or bottom mount it.  For bottom mounts the legs need not bee so long.
 +
 +
 +
 +
[[Image:Pp1.JPG|500px]]
 +
 +
 +
 +
[[Category:Arduino/RaspberryPi]] [[Category:FreeCad]]

Revision as of 14:02, 11 January 2018

These are actual prints of the mount described in Raspberry Pi Mounting Platform and Bracket

Small Platform With Voltage Regulator

Pp3.JPG



Pp small1.JPG


This is from the side of the Pi with its IO headers


Pp small4.JPG


image placeholders

Pp7.JPG


Arduino Over a Pi

Pp8.JPG


Pp8.JPG Pp9.JPG Pp10.JPG Pp12.JPG

Large Platform No Componets

This is a large platform with a mounting bracket. It is bad because the normal top mount will cover the Raspberry Pi pins. Still can be used, Access the pins another way, cut into it or bottom mount it. For bottom mounts the legs need not bee so long.


Pp1.JPG