Difference between revisions of "RS232 RS485 USB Converter Board"

Revision as of 20:07, 24 November 2008

for low traffic and low speed application
mcu, RS232, RS485/RS422, slave usb all can be interchangeable.
usb side
- support platform in linux with usb driver
- simulated uart programming in application level
rs232 to rs485 side
- Tested max. baudrate is 115200(i assume more high baudrate can be accepted, but i have not tested)

gEDA libraries can be download here or more updated, then modify the gafrc inside converter/

We have components and PCB, Or some have already soldered, if needed email to us: yan

get a usb chips to uart, which with linux driver
- MCT P87C52UBAA(http://pfranc.com/usb/usb.mhtml)
- cypress, PSoC with USB
linux driver
- driver in linux : http://ftdi-usb-sio.sourceforge.net/
- usb in linux guide : http://www.linux-usb.org/USB-guide/book1.html
get a usb to rs232/485 converter driver
- driver in windows : http://www.hexin-tech.com.cn/
re-design all PCB boards dimension
merge RS232 board and RS232_dspic_prog board together
In the market, it has so many these kind of converter and very cheap price(<HK100) and they are including a small mechanical box(electronic does not complex, but mechanial box is complex), which is better than what we do by ourself.

@@ Line 60: / Line 60: @@
 *get a usb to rs232/485 converter driver
 **driver in windows : http://www.hexin-tech.com.cn/
+*re-design all PCB boards dimension
+*merge RS232 board and RS232_dspic_prog board together
+*In the market, it has so many these kind of converter and very cheap price(<HK100) and they are including a small mechanical box(electronic does not complex, but mechanial box is complex), which is better than what we do by ourself.
 [[Category:Projects]]