Welcome to Open Circuits. This is a good place to talk about Open Circuits, as a whole.
We have 761 articles now. Yay!
free digital TV converter box coupon
moved to our page discussing Spam.
electrical mailing lists
Yahoo claims they have 1,831 electrical engineering mailing lists. What would be a good way of letting the people on those lists know about the Open Circuits wiki, without spamming them? --DavidCary 13:30, 31 May 2006 (PDT)
- Publish cold fusion howto :-)
- Send one email/week and only once per list. And be on topic, listen carefully for responses.
Freqmax 16:24, 30 July 2007 (PDT)
about Open Circuits
Document an original microcontroller project and join a PIC webring, or AVR webring. 20 June 2006
Is there some other wiki for people to talk about audio electronics? Or is this Open Circuits the best wiki for talking about things like "Analog Devices AN-221: The Alexander current-feedback audio power amplifier" by Mark Alexander ?
I think I would prefer to offload all the audio electronics controversies to some other wiki (but which one?). Still, it would be nice to have some "tips for high-power electronics" here. I imagine that tips page would list the various quirks of high-power MOSFETs, BJTs, TRIACs, and IGBTs, and (given a particular motor or speaker or other load) how to select one over the others, and various ways of working around those quirks. --220.127.116.11 07:17, 10 August 2006 (PDT)
I just joined Open Circuits. I have been servicing and designing audio equipment for several years (Recording consoles a specialty) I hope you will have a section for audio electronics. I also work with video projection systems and theatrical lighting (stage struck at an early age) I play electric rock-blues guitar, so I also am interested in tube guitar amps (Marshall and Boogie). And there is a big difference in what a guitar player thinks an amp should do, and what a recording engineer wants an amp for. I think these are valid points for discussion. I've also got an interest in power supplies (my experience is mostly with linear, but I've started learning about switching designs). In fact that brings me to my question, I have some regulator designs based on the 723 that I'd like to share. How do I go about doing that? I built a replacement for a console /- 18V @6A supply when I couldn't find the original regulator devices. I used 723s with external series pass devices. The unit has been working for close to 10 years now, so I think the design is worth sharing. Is anyone interested?
I also research discrete op amps like the Jensen 990. I've been working (on and off for years) on a clone of that using more modern, easily available parts and devices. Anyone else? Finally, in response to the first entry in this section, I too read that application note in Analog Devices Audio/Video Reference Manual. My copy is dated 1992. I've repaired a lot of amplifiers, but haven't built any. If anyone else is hip to this amp I'd like to hear about it. It is a very unique design. I also like the A75 amp design from Nelson Pass and Norman Thagard, and the Leach Amp by Marshall Leach. The last two are pretty normal as far as design goes, not as adventurous as the Alexander with its current-feedback approach. Aloha, RAF--18.104.22.168 14:04, 18 May 2007 (PDT)
Is there some other wiki for people to talk about automobile electronics? Or is this Open Circuits the best wiki for talking about things like "experimental Do-It-Yourself programmable electronic fuel injection controller"? Or should we just point people who want to talk ECUs (engine control units) to the MSEFI discussion forum, even though it sadly lacks a wiki? --DavidCary 22:36, 2 July 2007 (PDT)
How about converting a car to EV - Electrical vehicle, how to build an electrical motor controller? DC or 3-phase AC controller.. Mr. Holland
inviting bloggers to open circuits
how to connect a JTAG probe to a Nokia phone
I'd like to invite bloggers such as GyrosGeier to edit OpenCircuits. Rather than just spamming him, I think he would be more inclined to help out if we answered one of his questions first -- such as "If you have information on how to connect a JTAG probe to a Nokia phone, please let me know." Maybe I should start a page on JTAG... --DavidCary 09:37, 22 September 2006 (PDT)
The Hacked Gadgets blog also has a bunch of cool electronics. --DavidCary 11:58, 5 January 2007 (PST)
The default skin at OpenCircuits currently has "red links" = page exists, "dark red links" = page does not exist.
I find that confusing. (But not as bad as the wiki that has some links black-on-white, indistinguishable from normal text).
work-around: Register (it's free, and you don't have to give any personal information), then choose the "preferences" link in the far upper-right corner and then pick any other skin.
The other skins have coloring that you may be more used to from other wiki: "blue links" = page exists, "red links" = page does not exist.
--DavidCary 08:58, 18 December 2006 (PST)
The colors are better in the other skins, but the navigation is worse. How about a new skin that is like the default when it comes to navigation, but uses the normal wiki colors? // Cj 06:45, 4 October 2008 (PDT)
- Guys, the red color on links is AwuFul, it brings ppl headaches.
That's the only reason I cant participate ***
--Takeda 16:38, 29 September 2007 (PDT)
inviting people from other forums to open circuits
Lots of people talk about circuits for LED lighting at http://candlepowerforums.com/ . Perhaps we can talk some of them into contributing here -- perhaps using a page or two of Open Circuits as a FAQ for LEDs and drive circuits.
Should we have an entire page on "tools", and mention it on the main page? That risks listing *every* tool anyone has ever heard about, like the page at http://massmind.org/techref/tools.htm . Yes, I'm responsible for uglier bits on that page; I think the wide variety of oscilloscopes are particularly confusing. How could we cut through the confusion?
I see the "techniques" page already has a list of software tools. Perhaps it would be nifty to have a short list of all the tools necessary for each technique? Then a beginner would have a better idea of what tools he really needs to get (rather than looking at a huge list of every tool, and wondering for each one, "Am I going to regret buying it when I see it gathering dust? Or am I going to regret not buying it when I need it during a midnight debug session?").
--DavidCary 08:37, 24 January 2007 (PST)
Requests For Help
Thanks for your help with the camcorder mic.
current surge and battery life
currently my board is using a 3V battery, in every 40msec it will turn on its RF to communicate with the base station. I face a problem here is that my battery life is badly affected. Turning on the RF with cause a current surge.
Will this surge affect my battery life? If I use a supercapacitor does it helps?
-- User:22.214.171.124 04:14, 30 April 2007
MIDI electrical interface
In my opinion, the MIDI interface got a lot of things right that too many later interfaces still trip over.
- http://www.repairfaq.org/filipg/LINK/F_MIDI.html -- ASCII schematics
- http://www.engadget.com/2005/08/30/how-to-control-csound-with-a-custom-midi-controller-hardware/ -- hand-sketched schematics
- http://www.midi.org/about-midi/electrical.shtml "MIDI Electrical Specification Diagram & Proper Design of Joystick/MIDI Adapters" -- well-drawn schematics
- Wikipedia: The MIDI 1.0 Protocol
It may look simple, but too often people try to "improve" it by adding or removing things without understanding, ending up with a worse system.
Is there any other wiki that is more appropriate for explaining the low-level details of the MIDI electrical interface, and *why* it was done that way?
I would be most interested in discussing new communication interfaces -- but is this really the right wiki? Or would http://en.wikibooks.org/wiki/Serial_Programming or the PICA wiki be better for discussing improvements? --DavidCary 13:21, 21 June 2007 (PDT)
What do you think about http://makeyourownchip.com/ ? Should we talk about VLSI design ("VLSI: designing electronic chips") here at Open Circuits? Or is there a more appropriate wiki somewhere else? --DavidCary 15:59, 26 June 2007 (PDT)
generating a netlist with a "C++" program
The "Support Electronics for ATLAS Muon CSC" documentation claims that "The design was captured with C++. There are no schematics." and lists the C++ source code.
How did they do that? --DavidCary 01:15, 3 July 2007 (PDT)
Is there another wiki that talks about rocket electronics? Or is this Open Circuits the best place to talk about ground support electronics (such as Launch Controllers) and onboard electronics (such as one flight computer or another flight computer )? --DavidCary 14:21, 15 July 2007 (PDT)
In case you haven't heard of it for some strange reason, Hack-a-Day has featured a fair number of rocketry projects over the years, and many of their articles on said projects link back to the original project webpages.
--Purduecer 13:52, 10 April 2009 (UTC)
I have created pages about the Minimig project which is running an Amiga 500 in a Xilinx FPGA. It's rather a work in progress, than a static documentation. I hope nobody minds. Freqmax 18:35, 27 July 2007 (PDT)
LaTEX math markup
I wrote a quick howto on figuring out resistor values, but it looks bad without latex math markup enabled. Here's what I wrote as it appears on open circuits: http://www.opencircuits.com/Talk:Relays Here's how it appears on wikipedia (with math markup enabled): http://en.wikipedia.org/wiki/User:Mzandrew/Sandbox
Anyone know if this is a quick thing to enable for open circuits or if it's involved?
Mzandrew 14:16, 8 September 2007 (PDT)
I deleted a whole bunch of links that had been placed at the top of this page, probably by the same AH that did it to my page. I think the best solution would be to make it so no edits are possible without being logged in. Then there will be a record of who does this kind of thing. Then they can be banned from the site. I don't think that defeats the purpose of an open wiki environment, it simply means you have to register to contribute.
--RAF 10:30, 21 December 2007 (PST)
At least this page is still OK. The Spam AHole hit my user talk page again today. This is very aggravating.
--RAF 06:54, 22 December 2007 (PST)
- I agree. Annoying. I'm starting to "semi-protect" most pages so they can only be edited by logged-in users. I'm leaving a couple of pages wide open as a honeypot and/or test pages, so I can make tests and ban spammers without touching good pages. I think the $wgSpamRegex and/or ReCAPTCHA would be a better way to deal with spam. But my attempt to set them up isn't working yet. Sorry. --DavidCary 10:28, 3 January 2008 (PST)
New Release 2.0: Open Source Hardware by Jimmy Guterman
Does Guterman know about Open Circuits yet? --DavidCary 01:04, 4 January 2008 (PST)
A post I left at the Schmartboard mailing list.
Last week I posted to the Schmartboard mailing list asking about more interface types for their system. I made reference to sites like this and pleaded the case of individuals wishing to make projects that interface a little better than the methods available now. Neal Greenburg(VP in sales) replied that they had been kicking ideas around like what I was proposing for a while, and that he would like to get some feedback. So, if you're interested, head on over and pipe in. The basic request I made was asking for common internal pc interfaces(PCI, PCI-e, AGP, ISA, etc..) to be included as an attachable module.
The reason for my request was that this would allow organizations such as this one to develop hardware that is now unachievable at a decent prototyping price(quantities in the single digits). Their modules allow robust SMD hardware to be hand soldered and connected to other modules, but interfacing to a pc or other system is limited to rs232. I left a much more in depth post there, and if you're interested, you can find it there.
I'm not affiliated with schmartboard in any other way than as a customer. I'm sorry if this is seen as spam, it's not intended to be. If the general consensus is that this is spam, feel free to delete it.
Thanks for your time, take care. Jonkopp 13:49, 20 January 2008 (PST)
open source machine
Is there some other wiki somewhere that would be better for discussing "open source hardware designs" for non-electronic mechanical hardware, such as http://opensourcemachine.org/ ? --DavidCary 05:52, 26 June 2008 (PDT)
- http://groups.google.com/group/openmanufacturing :-) 2008-11-28
Is there a better wiki to discuss ultrasonic stuff? Such as: "FERS: the Flexible, Extensible Radar and Sonar Simulator."