Difference between revisions of "Motors"

From OpenCircuits
Jump to navigation Jump to search
(New page: == General == == Stepper Motors == A electric motor that turns a well define amount ( say 7 degrees ), a step, when connected to the right power source. Repeated activation will cause the...)
 
Line 8: Line 8:
 
*Machine tools
 
*Machine tools
 
*Robots
 
*Robots
Links
+
Links:
[http://en.wikipedia.org/wiki/Stepper_motor Stepper motor From Wikipedia, the free encyclopedia]
+
*[http://en.wikipedia.org/wiki/Stepper_motor Stepper motor From Wikipedia, the free encyclopedia]
 +
*[http://www.arduino.cc/en/Tutorial/StepperUnipolar Unipolar Stepper Motor]
  
 
== Servo Motors ==
 
== Servo Motors ==
 
A servo motor can be any kind of motor that is equipped with a position sensor.  The information from that sensor is then used to control the motor.  In common "RC" servos the sensor is a potentiometer and all the drive electronics are packaged inside the case with the motor.
 
A servo motor can be any kind of motor that is equipped with a position sensor.  The information from that sensor is then used to control the motor.  In common "RC" servos the sensor is a potentiometer and all the drive electronics are packaged inside the case with the motor.

Revision as of 19:23, 12 February 2008

General

Stepper Motors

A electric motor that turns a well define amount ( say 7 degrees ), a step, when connected to the right power source. Repeated activation will cause the motor to move any number of steps in either direction desired. Used for carefully controlled motion. Microcontrollers are often used as part of the drive system for a stepper motor.

Uses

  • Printers
  • Machine tools
  • Robots

Links:

Servo Motors

A servo motor can be any kind of motor that is equipped with a position sensor. The information from that sensor is then used to control the motor. In common "RC" servos the sensor is a potentiometer and all the drive electronics are packaged inside the case with the motor.