Linuxstamp Mboard 1

From OpenCircuits
(Difference between revisions)
Jump to: navigation, search
(link to CAN bus)
 
(22 intermediate revisions by 8 users not shown)
Line 3: Line 3:
  
 
== Sensor wish list ==
 
== Sensor wish list ==
 +
* Oscilloscope
 +
** Example [https://courses.ece.uiuc.edu/ece445/?f=Projects&sem=spring2006&proj=25#a25 PC based digital oscilloscope] :Project 25
 +
* [[CAN bus]]
 
* A/D converter with selectable ranges
 
* A/D converter with selectable ranges
 
* 3-axis accelerometer
 
* 3-axis accelerometer
Line 8: Line 11:
 
* Pressure sensor
 
* Pressure sensor
 
* GPS module
 
* GPS module
** [https://buy.garmin.com/shop/shop.do?cID=158&pID=6449 Garmin GPS module]
+
** [http://www.parallax.com/detail.asp?product_id=28146 Parallax GPS module]
  
 
== Communication wish list ==
 
== Communication wish list ==
 
* 802.11b/g interface
 
* 802.11b/g interface
** [http://www.sychip.com/PUB/WLAN6061EB.pdf Small wifi module.] The drivers aren't on the webpage. I don't know if you can get them GPL.
+
** [http://www.sychip.com/PUB/WLAN6061EB.pdf Sychip wifi module.] The drivers aren't on the webpage. I don't know if you can get them GPL.
 +
** [http://www.nxp.com/acrobat/literature/9397/75015598.pdf NXP wifi SiP.] Again I don't know about the drivers
 +
** [http://www.atheros.com/pt/bulletins/AR6001GLBulletin.pdf Atheros module] This is what the openmoko project is using
 +
** [http://www.spectec.com.tw/ Spectec] has many SD card wlan modules. There is some support for linux.
 
* Zigbee interface
 
* Zigbee interface
** [http://www.maxstream.net/products/xbee/xbee-pro-oem-rf-module-zigbee.php Serial zigbee module]
+
** [http://www.maxstream.net/products/xbee/xbee-pro-oem-rf-module-zigbee.php Maxstream zigbee module]
* 900Mhz radio
+
* Cellular modem
** [http://focus.ti.com/docs/prod/folders/print/cc1100.html?DCMP=hpa_rfif_ccweb&HQS=Other+OT+ccweb_cc1100 CC1100]
+
** [http://www.multitech.com/PRODUCTS/Categories/Embedded_Device_Networking/ Socket modems] from multitech
 +
* Mini PCI slot for any wireless card
  
 
== Power supply ==
 
== Power supply ==
 
* POE frontend
 
* POE frontend
* +/- 15v for +/- opamps and for LEM current sensors
+
** [http://www.powerfromethernet.com/pdf/Ag9000-Sv2-7.pdf A simple Isolated 5v 9 watt POE module] I've tested this module, and it works well with the Linuxstamp
* +5v for the linuxstamp
+
 
 +
 
 +
The correct link may be http://www.powerfromethernet.com/pdf/Ag9000-Sv2-10.pdf
  
 
== AVR slave ==
 
== AVR slave ==
A dedicated slave processor could be helpful for many things. The main function I have in mind now is PWM outputs for servo control. I think an AVR could even be programmed through the SPI port of the AT91RM9200 (some hacking may be needed to make that work). Even if you can't programm the AVR through the AT91RM9200 it can still be an SPI slave device.
+
A dedicated slave processor could be helpful for many things. The main function I have in mind now is PWM outputs for servo control. I think an AVR could even be programmed through the SPI port of the AT91RM9200 (some hacking may be needed to make that work). Even if you can't programm the AVR through the AT91RM9200, it can still be an SPI slave device.
 
* PWM output with standard servo headers
 
* PWM output with standard servo headers
 +
* Counting/Frequency inputs
 +
 +
== Links ==
 +
* Back to the [http://opencircuits.com/linuxstamp linuxstamp]
 +
 +
[[Category:Projects]]

Latest revision as of 07:04, 3 April 2014

Contents

[edit] Introduction

This project is purely in the planning stages. There are no designs available. It is meant to be a brainstorming area. Feel free to add possible vendors.

[edit] Sensor wish list

[edit] Communication wish list

[edit] Power supply


The correct link may be http://www.powerfromethernet.com/pdf/Ag9000-Sv2-10.pdf

[edit] AVR slave

A dedicated slave processor could be helpful for many things. The main function I have in mind now is PWM outputs for servo control. I think an AVR could even be programmed through the SPI port of the AT91RM9200 (some hacking may be needed to make that work). Even if you can't programm the AVR through the AT91RM9200, it can still be an SPI slave device.

  • PWM output with standard servo headers
  • Counting/Frequency inputs

[edit] Links

Personal tools
Namespaces

Variants
Actions
Navigation
Toolbox