Difference between revisions of "GM862 SMD Connector"

From OpenCircuits
Jump to navigation Jump to search
m (Reverted edits by 74.208.11.169 (Talk); changed back to last version by Wiml)
 
(10 intermediate revisions by 3 users not shown)
Line 1: Line 1:
<b>Original Creator:</b> --[[User:Sparkfun|Sparkfun]] 12:08, 26 January 2006 (PST)<br><br>
+
{| align=right
 +
|-
 +
|
 +
[[Image:Main-GM862header.jpg|GM862 SMD Connector]]
 +
|}
  
 
<b>Description:</b><br>This is the Molex SMD connector that interfaces to the GM862 Cellular Modules.  If you're prototyping with the GM862, you pretty much have to have one of these. Watch out, it's 0.5mm pitch, 50-pin, SMD connector. You can solder it by hand, but you'll need some experience, solder wick, and a decent iron. You can also reflow it with a hot-plate and a stencil. If you're not comfortable soldering it, there are breakout boards and designs available from SFE.
 
<b>Description:</b><br>This is the Molex SMD connector that interfaces to the GM862 Cellular Modules.  If you're prototyping with the GM862, you pretty much have to have one of these. Watch out, it's 0.5mm pitch, 50-pin, SMD connector. You can solder it by hand, but you'll need some experience, solder wick, and a decent iron. You can also reflow it with a hot-plate and a stencil. If you're not comfortable soldering it, there are breakout boards and designs available from SFE.
  
 
<b>Documents:</b><br>
 
<b>Documents:</b><br>
[[Media:1vv0300613 GM862-GPRS Hardware User Guide issue4.pdf|GM862 Hardware User Guide]]
+
[[Media:537480504 sd.pdf|Molex Connector Footprint and Spec Sheet]]
  
 
<b>Footprints:</b><br>
 
<b>Footprints:</b><br>
Coming in a minute from SFE.
+
Take a look at the [[SFE_Footprint_Library|SFE Footprint Library]]<br>
 +
FP Name: GM862<br>
 +
The dimension stuff can be found on page x of the hardware datasheet.
  
 
<b>Manufacturer Info:</b><br>
 
<b>Manufacturer Info:</b><br>
Molex part # : 53748-0504
+
[[Molex]] part # : 53748-0504
 
 
http://www.molex.com - Oh yea, they have free samples. But it can take a few days, and it's only available for parts in stock. Oh shoot, do we need a manufacturers area? Eeek.
 
  
 
<b>Related Items:</b><br>
 
<b>Related Items:</b><br>
 
[[GM862 Cellular Module]]
 
[[GM862 Cellular Module]]
 +
 +
<b>Original Creator:</b> --[[User:Sparkfun|Sparkfun]] 12:08, 26 January 2006 (PST)
 +
 +
[[Category:Connectors]]

Latest revision as of 17:52, 10 November 2007

GM862 SMD Connector

Description:
This is the Molex SMD connector that interfaces to the GM862 Cellular Modules. If you're prototyping with the GM862, you pretty much have to have one of these. Watch out, it's 0.5mm pitch, 50-pin, SMD connector. You can solder it by hand, but you'll need some experience, solder wick, and a decent iron. You can also reflow it with a hot-plate and a stencil. If you're not comfortable soldering it, there are breakout boards and designs available from SFE.

Documents:
Molex Connector Footprint and Spec Sheet

Footprints:
Take a look at the SFE Footprint Library
FP Name: GM862
The dimension stuff can be found on page x of the hardware datasheet.

Manufacturer Info:
Molex part # : 53748-0504

Related Items:
GM862 Cellular Module

Original Creator: --Sparkfun 12:08, 26 January 2006 (PST)