GM862 SMD Connector

From OpenCircuits
(Difference between revisions)
Jump to: navigation, search
Line 11: Line 11:
  
 
<b>Footprints:</b><br>
 
<b>Footprints:</b><br>
[[Media:GM862-Footprint.zip|GM862 Footprint]]
+
Take a look at the [[SFE_Footprint_Library|SFE Footprint Library]]<br>
 
+
FP Name: GM862<br>
 
The dimension stuff can be found on page x of the hardware datasheet.
 
The dimension stuff can be found on page x of the hardware datasheet.
  

Revision as of 14:10, 28 January 2006

GM862 SMD Connector

Description:
This is the Molex SMD connector that interfaces to the GM862 Cellular Modules. If you're prototyping with the GM862, you pretty much have to have one of these. Watch out, it's 0.5mm pitch, 50-pin, SMD connector. You can solder it by hand, but you'll need some experience, solder wick, and a decent iron. You can also reflow it with a hot-plate and a stencil. If you're not comfortable soldering it, there are breakout boards and designs available from SFE.

Documents:
Molex Connector Footprint and Spec Sheet

Footprints:
Take a look at the SFE Footprint Library
FP Name: GM862
The dimension stuff can be found on page x of the hardware datasheet.

Manufacturer Info:
Molex part # : 53748-0504

Related Items:
GM862 Cellular Module

Original Creator: --Sparkfun 12:08, 26 January 2006 (PST)

Personal tools
Namespaces

Variants
Actions
Navigation
Toolbox