GM862 SMD Connector
|Line 10:||Line 10:|
[[:537480504 sd.pdf|Molex Connector Footprint and Spec Sheet]]
Revision as of 13:14, 26 January 2006
Original Creator: --Sparkfun 12:08, 26 January 2006 (PST)
This is the Molex SMD connector that interfaces to the GM862 Cellular Modules. If you're prototyping with the GM862, you pretty much have to have one of these. Watch out, it's 0.5mm pitch, 50-pin, SMD connector. You can solder it by hand, but you'll need some experience, solder wick, and a decent iron. You can also reflow it with a hot-plate and a stencil. If you're not comfortable soldering it, there are breakout boards and designs available from SFE.
Molex Connector Footprint and Spec Sheet
Coming in a minute from SFE.
Molex part # : 53748-0504
http://www.molex.com - Oh yea, they have free samples. But it can take a few days, and it's only available for parts in stock. Oh shoot, do we need a manufacturers area? Eeek.
GM862 Cellular Module