GM862 SMD Connector

From OpenCircuits
(Difference between revisions)
Jump to: navigation, search
m (Reverted edits by 74.208.11.169 (Talk); changed back to last version by Wiml)
 
(13 intermediate revisions by 3 users not shown)
Line 1: Line 1:
This is the Molex SMD connector that interfaces to the GM862 Cellular Modules.  If you're prototyping with the GM862, you pretty much have to have one of these.
 
 
[[Image:partimage.jpg|Part Image]]
 
 
== Manufacturer ==
 
Molex part # : 53748-0504
 
== Distributor ==
 
Molex - [http://www.molex.com]
 
== Footprint ==
 
Coming in a minute - SFE
 
 
 
{| align=right
 
{| align=right
 
|-
 
|-
 
|  
 
|  
[[Image:Main-GM862-0.jpg|GM862]]
+
[[Image:Main-GM862header.jpg|GM862 SMD Connector]]
 
|}
 
|}
<b>Original Creator:</b> --[[User:Sparkfun|Sparkfun]] 22:18, 25 January 2006 (PST)<br><br>
 
<b>Description:</b><br> The GM862 is a GSM cellular module that enables you to connect to the cellular network using simple 'AT' commands.
 
  
Yes it's as easy as sending:
+
<b>Description:</b><br>This is the Molex SMD connector that interfaces to the GM862 Cellular Modules.  If you're prototyping with the GM862, you pretty much have to have one of these. Watch out, it's 0.5mm pitch, 50-pin, SMD connector. You can solder it by hand, but you'll need some experience, solder wick, and a decent iron. You can also reflow it with a hot-plate and a stencil. If you're not comfortable soldering it, there are breakout boards and designs available from SFE.
  
<tt>ATD 3035551234;</tt>
+
<b>Documents:</b><br>
 +
[[Media:537480504 sd.pdf|Molex Connector Footprint and Spec Sheet]]
  
Couple down sides to this module:<br>
+
<b>Footprints:</b><br>
1) The GM862 uses a very specialized 50-pin molex connector that only comes in SMD.<br>
+
Take a look at the [[SFE_Footprint_Library|SFE Footprint Library]]<br>
2) The GM862 requires 3.8V at 1.9A peak. So you'll need to use the LT1528 as well.
+
FP Name: GM862<br>
 +
The dimension stuff can be found on page x of the hardware datasheet.
  
Cool module. Works anywhere with GSM connectivity (North America and Europe included).
+
<b>Manufacturer Info:</b><br>
 +
[[Molex]] part # : 53748-0504
  
<b>Documents:</b><br>
+
<b>Related Items:</b><br>
[[Media:1vv0300613 GM862-GPRS Hardware User Guide issue4.pdf|GM862 Hardware User Guide]]
+
[[GM862 Cellular Module]]
  
<b>Footprints:</b><br>
+
<b>Original Creator:</b> --[[User:Sparkfun|Sparkfun]] 12:08, 26 January 2006 (PST)
This module does not have a footprint itself. The dimension stuff can be found on page x of the hardware datasheet. To implement this module onto a PCB layout, see the footprints associated with the SMD connector.
+
  
<b>Related Items:</b><br>
+
[[Category:Connectors]]
[[GM862 SMD Connector]]
+

Latest revision as of 17:52, 10 November 2007

GM862 SMD Connector

Description:
This is the Molex SMD connector that interfaces to the GM862 Cellular Modules. If you're prototyping with the GM862, you pretty much have to have one of these. Watch out, it's 0.5mm pitch, 50-pin, SMD connector. You can solder it by hand, but you'll need some experience, solder wick, and a decent iron. You can also reflow it with a hot-plate and a stencil. If you're not comfortable soldering it, there are breakout boards and designs available from SFE.

Documents:
Molex Connector Footprint and Spec Sheet

Footprints:
Take a look at the SFE Footprint Library
FP Name: GM862
The dimension stuff can be found on page x of the hardware datasheet.

Manufacturer Info:
Molex part # : 53748-0504

Related Items:
GM862 Cellular Module

Original Creator: --Sparkfun 12:08, 26 January 2006 (PST)

Personal tools
Namespaces

Variants
Actions
Navigation
Toolbox