Difference between revisions of "FreeCad .17 Examples"

From OpenCircuits
Jump to navigation Jump to search
 
(One intermediate revision by the same user not shown)
Line 1: Line 1:
 
== Introduction ==
 
== Introduction ==
 +
 +
This is a useless page, soon to be deleted.
  
 
*[[FreeCad: Using Example Models]]
 
*[[FreeCad: Using Example Models]]
Line 8: Line 10:
  
  
D:\Russ\0000\FreeCad\Point17\HoleInCyl_1.FCStd  use part design with a cylinder from part, map to top face, hole moves with the cyl.   
+
* D:\Russ\0000\FreeCad\Point17\HoleInCyl_1.FCStd  use part design with a cylinder from part, map to top face, hole moves with the cyl.   
 
+
* D:\Russ\0000\FreeCad\Point17\HoleInCyl_2.FCStd  same as HoleInCyl_1 but done in freecad .16 open in .17 and compare to HoleInCyl_1
 
[[Category:FreeCad]]
 
[[Category:FreeCad]]

Latest revision as of 12:20, 12 December 2019

Introduction[edit]

This is a useless page, soon to be deleted.



  • D:\Russ\0000\FreeCad\Point17\HoleInCyl_1.FCStd use part design with a cylinder from part, map to top face, hole moves with the cyl.
  • D:\Russ\0000\FreeCad\Point17\HoleInCyl_2.FCStd same as HoleInCyl_1 but done in freecad .16 open in .17 and compare to HoleInCyl_1