Cooling

From OpenCircuits
Revision as of 15:43, 27 August 2015 by DavidCary (talk | contribs) (yet more open-source projects involving cooling)
Jump to navigation Jump to search

Many people use thermoelectric modules, commonly called Peltier modules, to make small things colder.

(Compressor-based air conditioners and refrigerators and freezers are often more practical for cooling larger things).


Both radio and optical astronomy seems to work better when the receiver is cold.


  • "Open Source Thermal Cycler" Polymerase Chain Reaction (PCR) uses the Peltier for both heating *and* cooling.[1][2]

[3] [4] [5]

[10] [11]

  • Another Peltier fridge project: "How to build your own dirt cheap fridge" ("My most important consideration is that it can be service-able by me") [12]

When a Peltier element is attached to a voltage source, it pumps heat energy from one side to the other, making one side colder and one side hotter. In principle you could use a Peltier element just for heating ( see [13] )



Typically Peltier projects use a 1-wire digital thermometer or a thermistor to measure the temperature at the important parts, and



FIXME: maybe say a few more words about heatsinks, such as the (open-source?) PowerPeg Thermal Management System ?