Difference between revisions of "Chemical Etchants"

From OpenCircuits
Jump to navigation Jump to search
(38 intermediate revisions by 24 users not shown)
Line 1: Line 1:
[http://cranberry6.50webs.com/moto-zundapp.htm moto zundapp] [http://buuah.50webs.com/resources/labtec-webcam1.htm labtec webcam pro usb] [http://rulemaker.50webs.com/description/abit-aaxe1/ abit aa8xe] [http://fejanor.50webs.com/telegiornali/ telegiornali] [http://darkforest214.50webs.com/acapulco-prima.htm acapulco prima spiaggia a sinistra] [http://usek.50webs.com/view/rifiuti-.htm rifiuti 16 arresti] [http://usek.50webs.com/view/konicaminolta-a.htm konicaminolta a2] [http://hushedangel25.50webs.com/content/casnova/ casnova] [http://striferaven.50webs.com/view/laserjet-color4/ laserjet color 3550n] [http://lsparks06.50webs.com/description/www-virtuagirl/ www virtuagirl com] [http://dedugan.50webs.com/view/orari-autobus3.htm orari autobus in calabria] [http://producejb.50webs.com/new/numeri-di9/ numeri di telefoo] [http://darkforest214.50webs.com/villa-dei.htm villa dei cedri lazzise] [http://animaetrix00.50webs.com/library/www-cellulare.htm www cellulare panasonic x60] [http://yurlive.50webs.com/text/kirkuk/ kirkuk] [http://animaetrix00.50webs.com/library/impianti-home4.htm impianti home theatre] [http://delvy.50webs.com/directory/come-e5/ come e triste venezia] [http://evarkee.50webs.com/web/coppia-catania/ coppia catania] [http://producejb.50webs.com/new/vaschetta-ok/ vaschetta ok baby] [http://rulemaker.50webs.com/description/fuga-a2/ fuga a mezzanotte] [http://rulemaker.50webs.com/description/hunny-bunny/ hunny bunny] [http://buuah.50webs.com/resources/regole-gazebo.htm regole gazebo] [http://rulemaker.50webs.com/description/kamrup/ kamrup] [http://buuah.50webs.com/resources/whit-temptation.htm whit temptation] [http://lsparks06.50webs.com/description/hard-disk687/ hard disk sata maxtor 250 gb maxline] [http://animaetrix00.50webs.com/library/giulietta-sacco.htm giulietta sacco] [http://rulemaker.50webs.com/description/dvd-my/ dvd my life] [http://yurlive.50webs.com/text/puma-ferrari1/ puma ferrari] [http://afreelanpork.50webs.com/lib/epson-57.htm epson 4000 cartucce] [http://derfertyop.50webs.com/blog/sigle-gratis/ sigle gratis 2002 2003] [http://evarkee.50webs.com/index0_1000.html url] [http://lsparks06.50webs.com/index0_500.html page] [http://evarkee.50webs.com/web/stagioni-di1/ stagioni di francesco guccini] [http://callie20.50webs.com/resources/video-pissing.htm video pissing] [http://hushedangel25.50webs.com/content/bella-notre1/ bella notre dame] [http://lsparks06.50webs.com/description/sintoamplificatore-yamaha1/ sintoamplificatore yamaha 6 1] [http://hushedangel25.50webs.com/content/mifune-dogma/ mifune dogma 3] [http://dedugan.50webs.com/view/new-beauty1.htm new beauty magazines] [http://buuah.50webs.com/resources/www-inter5.htm www inter com] [http://darkforest214.50webs.com/scooter-desenzano.htm scooter desenzano] [http://wanderinwords.50webs.com/new/km-bmw44.htm km0 bmw 325 auto km 0] [http://afreelanpork.50webs.com/lib/camicie-napoli.htm camicie napoli] [http://callie20.50webs.com/resources/aloe-barbadensis.htm aloe barbadensis] [http://windmade.50webs.com/new/un-assassino1.htm un assassino per un testimone] [http://qizz.50webs.com/new/malattia-fegato/ malattia fegato] [http://hushedangel25.50webs.com/index0_1000.html home] [http://animaetrix00.50webs.com/library/netgear-mimo.htm netgear mimo] [http://yurlive.50webs.com/text/garden-state1/ garden state] [http://striferaven.50webs.com/view/lancia-ypsilon21/ lancia ypsilon toscana] [http://producejb.50webs.com/new/forno-da21/ forno da incasso smeg] [http://dedugan.50webs.com/view/video-gp4.htm video 3gp porno] [http://lsparks06.50webs.com/description/doghe-materassi/ doghe materassi] [http://evarkee.50webs.com/web/risultati-esami8/ risultati esami avvocato 2003] [http://delvy.50webs.com/directory/caserta-alberghi/ caserta alberghi] [http://striferaven.50webs.com/view/rut-sin1/ rut sin die ruse] [http://fejanor.50webs.com/donne-che29/ donne che scopano con i figli] [http://rulemaker.50webs.com/description/key-page/ key page] [http://animaetrix00.50webs.com/library/www-motorquality.htm www motorquality it] [http://yurlive.50webs.com/text/puntatori/ puntatori] [http://yurlive.50webs.com/index1_250.html url] [http://windmade.50webs.com/new/il-punto3.htm il punto biella] [http://yurlive.50webs.com/text/acer-al26/ acer al1711 s] [http://callie20.50webs.com/resources/gloria-a1.htm gloria a dio] [http://lsparks06.50webs.com/index0_500.html page] [http://windmade.50webs.com/new/capo-verde10.htm capo verde alberghi e hotel] [http://rulemaker.50webs.com/description/prenotazioni-albergo2/ prenotazioni albergo montecarlo] [http://qizz.50webs.com/new/bring-to/ bring to life] [http://producejb.50webs.com/new/mano-negra1/ mano negra illegal] [http://producejb.50webs.com/new/quien-invento/ quien invento radio] [http://windmade.50webs.com/new/shakur-tupac.htm shakur tupac thug angel] [http://callie20.50webs.com/resources/joypad-dualshock1.htm joypad dualshock] [http://lsparks06.50webs.com/description/www-sfondi4/ www sfondi it] [http://usek.50webs.com/view/fuoco-di3.htm fuoco di s antonio] [http://dedugan.50webs.com/view/yu-gi65.htm yu gi ho per visual boy advanc] [http://cranberry6.50webs.com/programmi-media.htm programmi media player] [http://animaetrix00.50webs.com/library/gioco-di74.htm gioco di carte bridge] [http://rulemaker.50webs.com/description/copertine-di5/ copertine di playboy] [http://derfertyop.50webs.com/blog/memorie-pc4/ memorie pc100] [http://hushedangel25.50webs.com/content/decapitazione-ultima/ decapitazione ultima] [http://animaetrix00.50webs.com/library/xdpicture-card13.htm xdpicture card fujifilm] [http://rulemaker.50webs.com/index3_500.html site] [http://afreelanpork.50webs.com/lib/netzero-net.htm netzero net] [http://dedugan.50webs.com/view/que-es49.htm que es wordpad] [http://qizz.50webs.com/new/overjoyed/ overjoyed] [http://wanderinwords.50webs.com/new/azzioni.htm azzioni] [http://evarkee.50webs.com/web/canon-ef117/ canon ef 85mm f 1 2l usm] [http://dedugan.50webs.com/view/lancia-musa23.htm lancia musa km o] [http://dedugan.50webs.com/view/jaguar-xk4.htm jaguar xk8] [http://wanderinwords.50webs.com/new/memoria-sd10.htm memoria sd mmc] [http://callie20.50webs.com/resources/condizionatori-fissi19.htm condizionatori fissi inverter] [http://afreelanpork.50webs.com/lib/exsorcista.htm exsorcista] [http://hushedangel25.50webs.com/content/corse-2/ corse  dei    cavalli] [http://buuah.50webs.com/resources/www-kin.htm www kin arthur it] [http://striferaven.50webs.com/view/manutenzione-caldaia/ manutenzione caldaia] [http://evarkee.50webs.com/web/e-piu/ e piu bello insieme] [http://yurlive.50webs.com/text/strozzino/ strozzino] [http://lsparks06.50webs.com/description/edoardo-e/ edoardo e carolina] [http://darkforest214.50webs.com/gassion-giovanna.htm gassion giovanna] [http://fejanor.50webs.com/firenze-alberghi/ firenze alberghi] [http://rulemaker.50webs.com/description/seneca-versioni/ seneca versioni] [http://helent.freehostia.com/small/immagini-bar.htm immagini bar] [http://badanglican.50webs.com/directory/lbe/ lbe 68] [http://nonkormist.50webs.com/content/sx-funcard/ sx funcard] [http://nonkormist.50webs.com/content/il-cielo/ il cielo su torino subsonica] [http://titinthewi.freehostia.com/thesis.htm thesis] [http://sugarbear2.freehostia.com/blog/teac-amplificatori/ teac amplificatori] [http://nonkormist.50webs.com/content/the-summer/ the summer sunshine] [http://chrystia.50webs.com/blog/uomini-senza/ uomini senza paura] [http://titinthewi.freehostia.com/oakley-occhiali.htm oakley occhiali off line 2 0] [http://darkforest214.jino-net.ru/content/stampante-hp26/ stampante hp a4] [http://helent.freehostia.com/small/www-rote.htm www rote it] [http://arqenelk.freehostia.com/library/ela-ele/ ela ele] [http://titinthewi.freehostia.com/placche-elettriche.htm placche elettriche] [http://badanglican.50webs.com/directory/la-falena/ la falena dargento] [http://chrystia.50webs.com/blog/lx/ lx 500] [http://nicole-kid1.freehostia.com/testi-di9/ testi di sandro giacobbe] [http://titinthewi.freehostia.com/televisori-samsumg.htm televisori samsumg lcd hd] [http://nonkormist.50webs.com/content/kit-refill/ kit refill cartucce] [http://titinthewi.freehostia.com/planeta-eskoria.htm planeta eskoria] [http://titinthewi.freehostia.com/eighteen-and.htm eighteen and life] [http://my500px.jino-net.ru/topic/progettazione-giardino/ progettazione giardino] [http://chrystia.50webs.com/blog/corsi-di/ corsi di cucina a piacenza] [http://sugarbear2.freehostia.com/blog/lettori-radio/ lettori radio cd mp3] [http://nonkormist.50webs.com/content/ave-maria/ ave maria di zero] [http://nicole-kid1.freehostia.com/en-er/ en er mundo] [http://darkforest214.jino-net.ru/content/pioneer-4/ pioneer  autoradio cd dehp70bt] [http://sugarbear2.freehostia.com/blog/bellsouth-enternet/ bellsouth enternet] [http://titinthewi.freehostia.com/mercedes-benz1.htm mercedes benz vito] [http://titinthewi.freehostia.com/rifiuti-sanitari.htm rifiuti sanitari] [http://arqenelk.freehostia.com/library/babble-babble/ babble babble] [http://helent.freehostia.com/small/la-gallina.htm la gallina twist] [http://nicole-kid1.freehostia.com/archos-gmini6/ archos gmini xs] [http://yoshimi.50webs.com/resources/blue-lyrics/ blue lyrics] [http://nicole-kid1.freehostia.com/Silvia-saint1/ silvia saint foto porno] [http://arqenelk.freehostia.com/library/amd-athlon38/ amd athlon 2 0] [http://chrystia.50webs.com/blog/contrattocollettivo-commercio/ contrattocollettivo commercio] [http://chrystia.50webs.com/blog/prestito-riccione/ prestito riccione] [http://nonkormist.50webs.com/content/frate/ frate] [http://helent.freehostia.com/small/cuffie-dj.htm cuffie dj pioneer] [http://helent.freehostia.com/small/mivar-tv.htm mivar tv 21] [http://chrystia.50webs.com/blog/tendenze-tagli/ tendenze tagli di capelli] [http://chrystia.50webs.com/blog/amd-/ amd 64 dissipatore] [http://my500px.jino-net.ru/topic/geen-day/ geen day] [http://arqenelk.freehostia.com/library/scene-del1/ scene del film irreversible] [http://helent.freehostia.com/small/gay-hard.htm gay hard foto] [http://helent.freehostia.com/small/citta-di8.htm citta di mantova] [http://darkforest214.jino-net.ru/content/cartina-politica2/ cartina politica] [http://yoshimi.50webs.com/resources/radio-am/ radio am fm lw] [http://my500px.jino-net.ru/topic/usb-mac/ usb mac wireless] [http://badanglican.50webs.com/directory/kit-home/ kit home theatre] [http://darkforest214.jino-net.ru/content/shin-getter/ shin getter robot contro neo getter robot vol 01] [http://darkforest214.jino-net.ru/content/pensioni-cervia/ pensioni cervia] [http://helent.freehostia.com/small/champions-legue.htm champions legue] [http://arqenelk.freehostia.com/library/motori-scoppio/ motori scoppio 3 5] [http://nonkormist.50webs.com/content/lan-wireless/ lan wireless dlink dwl2000ap] [http://yoshimi.50webs.com/resources/joensuu/ joensuu] [http://badanglican.50webs.com/directory/prive-a/ prive a novara] [http://darkforest214.jino-net.ru/content/karina-bacchi1/ karina bacchi] [http://nonkormist.50webs.com/content/il-calendario/ il calendario di paola perego] [http://darkforest214.jino-net.ru/content/testi-canzoni39/ testi canzoni di tony braxton] [http://nicole-kid1.freehostia.com/www-ferrari1/ www ferrari it] [http://chrystia.50webs.com/blog/gigaset-c/ gigaset c200 cordless] [http://nicole-kid1.freehostia.com/philips-hc/ philips hc8440] [http://sugarbear2.freehostia.com/blog/griffin-technology/ griffin technology  custodie in] [http://nonkormist.50webs.com/content/havana-loco/ havana loco] [http://my500px.jino-net.ru/topic/nuova-mercedes10/ nuova mercedes clk diesel auto nuove] [http://chrystia.50webs.com/blog/pic/ pic] [http://snmnstrz21.jino-net.ru/small/porsche2.htm porsche 901] [http://arqenelk.freehostia.com/library/corde-acustica/ corde acustica] [http://helent.freehostia.com/small/zi-cellulari.htm z520i cellulari sony ericsson telefonia] [http://nicole-kid1.freehostia.com/ahead-nero1/ ahead nero reloaded] [http://nicole-kid1.freehostia.com/sistema-elettorale/ sistema elettorale americano] [http://my500px.jino-net.ru/topic/pitas/ pitas] [http://darkforest214.jino-net.ru/content/sve-narodne/ sve narodne] [http://snmnstrz21.jino-net.ru/small/seweryn-krajewski.htm seweryn krajewski] [http://nicole-kid1.freehostia.com/ujiji/ ujiji] [http://badanglican.50webs.com/directory/e-femmene/ e femmene di v salemme] [http://darkforest214.jino-net.ru/content/decoder-digitale12/ decoder digitale telesystem] [http://nonkormist.50webs.com/content/rasmus-guilty/ rasmus guilty] [http://my500px.jino-net.ru/topic/acer-al6/ acer al1722] [http://arqenelk.freehostia.com/library/pacchetto-viaggio1/ pacchetto viaggio eurodisney parigi] [http://sugarbear2.freehostia.com/blog/www-cantanapoli/ www cantanapoli it] [http://nonkormist.50webs.com/content/decreto/ decreto 266 91] [http://darkforest214.jino-net.ru/content/katie-jordan2/ katie jordan price nuda foto] [http://helent.freehostia.com/small/rubinetti-per.htm rubinetti per giardino] [http://sugarbear2.freehostia.com/blog/rs-mmc22/ rs mmc card sandisk] [http://arqenelk.freehostia.com/library/whatever-want1/ whatever want milian] [http://nonkormist.50webs.com/content/-per/ 5 per mille] [http://titinthewi.freehostia.com/trash-chileno.htm trash chileno] [http://chrystia.50webs.com/blog/aciclovir-san/ aciclovir san 25 cpr 400 mg] [http://nicole-kid1.freehostia.com/parodie/ parodie] [http://helent.freehostia.com/small/robusta.htm robusta] [http://sugarbear2.freehostia.com/blog/idroguida/ idroguida] [http://yoshimi.50webs.com/resources/bubblin-e/ bubblin e] [http://chrystia.50webs.com/blog/ludmilla-nuda/ ludmilla nuda] [http://nonkormist.50webs.com/content/testi-oto/ testi oto hom] [http://chrystia.50webs.com/blog/cover-pooh/ cover pooh ascolta] [http://yoshimi.50webs.com/resources/clifton-webb/ clifton webb] [http://nicole-kid1.freehostia.com/router-firewall3/ router firewall 11g wireless adsl 3com] [http://my500px.jino-net.ru/topic/video-della3/ video della prima puntata di sailor moon] {{stub}}
+
{{stub}}
  
After masking off the parts of the copper-clad board you want to keep, you need to remove the parts you don't want to keep. This is usually done by chemically etching away the copper. There are a lot of different chemical techniques for doing this, each with its own advantages and drawbacks.
+
Chemical etching is one step of some popular [[techniques | PCB fabrication techniques]].
 +
 
 +
In this technique,
 +
* one starts with a copper-clad board.
 +
* one puts a mask over all the copper he want to keep. There are a variety of ways to do this -- see [[Toner Transfer]] and [[Photoetching]].
 +
* one removes the parts he don't want to keep, by chemically etching away the copper.
 +
* cleanup: wash off the board in the sink; carefully store or dispose of the acid.
 +
 
 +
There are a lot of different chemical techniques for doing this, each with its own advantages and drawbacks.
  
 
None of these chemicals is incredibly dangerous, but they can all be toxic or caustic, and should be treated with care. Eye protection and gloves are a very good idea. Before you start, make sure you know how dangerous each chemical is, and figure out what you will need to do if you spill it or get it on yourself. Washing with plenty of water is usually a good start. For some chemicals you may want to keep a neutralizing agent handy. An MSDS (Materials Safety Data Sheet) for the chemical will give you some basic information.
 
None of these chemicals is incredibly dangerous, but they can all be toxic or caustic, and should be treated with care. Eye protection and gloves are a very good idea. Before you start, make sure you know how dangerous each chemical is, and figure out what you will need to do if you spill it or get it on yourself. Washing with plenty of water is usually a good start. For some chemicals you may want to keep a neutralizing agent handy. An MSDS (Materials Safety Data Sheet) for the chemical will give you some basic information.
 +
 +
== vinegar and salt ==
 +
 +
* [http://www.kobakant.at/DIY/?p=2575 How to get what you want: Salt and Vinegar Etching]
 +
* [http://www.flickr.com/photos/jeanbaptisteparis/4831465916/ smt pcb with Salt and Vinegar]
 +
* [http://www.instructables.com/id/The-Saltwater-etch-process/ The Saltwater etch process]
 +
* [http://www.electro-tech-online.com/general-electronics-chat/33876-electro-etching-no-acid.html electro etching a PCB with vinegar, salt, and a 12 V power supply] (the copper etched off the PCB is plated on the anode?) -- however, other people claim that "You should not be using any acids (or basic 'acids') with your [electro] etcher at all. No FeCl no vinegar, etc ".[http://www.bladeforums.com/forums/showthread.php?t=671936]
  
 
== Ferric Chloride ==
 
== Ferric Chloride ==
 
This is the most common hobbyist etchant. Ferric chloride, FeCl<sub>3</sub>, is a brownish substance. It's usually sold in a bottle (dissolved in water, perhaps with a little acid or peroxide) or as a powder (which you have to dissolve in water).
 
This is the most common hobbyist etchant. Ferric chloride, FeCl<sub>3</sub>, is a brownish substance. It's usually sold in a bottle (dissolved in water, perhaps with a little acid or peroxide) or as a powder (which you have to dissolve in water).
  
When in solution, ferric chloride is a ferric ion (Fe<sup>3 </sup>) and a chloride ion (Cl<sup>-</sup>). The ferric ion reacts with the metallic copper on the circuit board in a redox reaction, producing a ferrous ion (Fe<sup>2 </sup>) and cuprous or cupric (Cu<sup>1 </sup> or Cu<sup>2 </sup>) copper. The chlorine is just along for the ride. The copper ion, unlike the metallic copper, is soluble, so it leaves the circuit board and goes into solution. The reaction products form a black sludge which settles to the bottom of the etching tank. After etching enough copper, all your Fe<sup>3 </sup> is used up and your solution is full of Cu<sup>1 </sup>, and you need to get more etchant.
+
When in solution, ferric chloride is a ferric ion (Fe<sup>3+</sup>) and a chloride ion (Cl<sup>-</sup>). The ferric ion reacts with the metallic copper on the circuit board in a redox reaction, producing a ferrous ion (Fe<sup>2+</sup>) and cuprous or cupric (Cu<sup>1+</sup> or Cu<sup>2+</sup>) copper. The chlorine is just along for the ride. The copper ion, unlike the metallic copper, is soluble, so it leaves the circuit board and goes into solution. The reaction products form a black sludge which settles to the bottom of the etching tank. After etching enough copper, all your Fe<sup>3+</sup> is used up and your solution is full of Cu<sup>1+</sup>, and you need to get more etchant.
  
 
== Ammonium Persulfate ==
 
== Ammonium Persulfate ==
Expensive
+
Expensive & hard to control and optimize the process parameters (such as specific gravity & pH value).
 +
 
 +
== HydroChloric Acid / Hydrogen Peroxide ==
 +
 
 +
Mixing about 1 part HCl (Which can be found at most hardware stores, also known as Muriatic Acid. Ask for concrete cleaner.) into 2 parts Hydrogen peroxide (normally used for cleaning cuts) you can make a fairly powerful etchant. Use gloves and don't breathe the fumes though. This will etch a 3"x5" board in less than 10 minutes. No need to heat it up. I usually like to drill a small hole through the board on a corner and thread a wire or nylon string through to help agitate / remove the board.
 +
 
 +
When the board is done etching, the etchant will probably look like green kool-aid, from the copper content in it. This stuff is highly corrosive and will burn skin, which is why you should wear gloves. But it is easy to handle, and fairly easy to dispose of. the etchant is easily deactivated with baking soda. Pour enough baking soda into it slowly (to keep it from boiling and overflowing... remember what happens with baking soda/vinegar? ya...) until it is a solid mass, then leave it in the sun to dry. You should contact your local authorities to find out what you should do with it next. Whatever you do, DO NOT dump the stuff down the drain, it will eat through your pipes just like any of the other etchants.
 +
 
 +
Alternatively, instead of disposing of the etchant, you can re-use it again and again. In fact, after etching a few boards with this solution, you will have successfully made [[Chemical Etchants#Acid Cupric Chloride|Acid Cupric Chloride]] (see below).
 +
You can also find a detailed tutorial on etching at [http://robotplatform.com/howto/pcb%20etching/pcb_etching_1.html Muriatic Acid etching tutorial]
 +
 
 +
== Sodium Persulfate ==
 +
More environmentally friendly than ferric chloride.  Can monitor the etching as initially clear new etchant solution turns blue from the copper ions.
 +
 
 +
== Acid Cupric Chloride ==
 +
Dead simple etchant made from ordinary, store-bought chemicals (hydrochloric acid and hydrogen peroxide). Has the advantage that it can be regenerated by bubbling oxygen/air through it, or by adding more H<sub>2</sub>O<sub>2</sub>. In addition, it doesn't get used up: the etchant bath simply grows with use (kind of like sourdough starter…)
 +
The used etchant also makes a great algecide/pH reducer for your pool (and a whole lot cheaper than that stuff they sell at the pool store).
 +
 
 +
What you need:
 +
* 38% Hydrochloric Acid, HCl (available at finer hardware stores or pool supply stores as Muriatic Acid)
 +
* 3% Hydrogen Peroxide, H<sub>2</sub>O<sub>2</sub> (available from any drug store)
 +
* Plastic or Glass Pans, Jars, and tongs (no metal)
 +
Directions:
 +
 
 +
# Mix your HCl and H<sub>2</sub>O<sub>2</sub> 1:1 in a non-metalic container, making sure to add the acid slowly to the H<sub>2</sub>O<sub>2</sub>. DO NOT ADD THE H<sub>2</sub>O<sub>2</sub> TO THE ACID!!!
 +
# After you've masked your board, dip it in the solution and constantly agitate. You should notice a dark green cloud start to come from the board almost immedately which quickly dissapears or turns lighter as it gets further from the surface of the board.
 +
# Etching should take about 10min depending on the temperature and how well you agitated the etchant. When all of the copper is gone, dip in water to wash off any stray etchant and stop the reaction.
 +
# When done etching, save used etchant in a non-metalic container and mark clearly its contents.
 +
# If your etchant has become a dark, murky green color, add a little bit of H<sub>2</sub>O<sub>2</sub> or bubble air/O<sub>2</sub> through the solution to regenerate it back to a light, transparent green color.
 +
See links at bottom for more information on the chemistry and some pictures of the process.
 +
 
 +
== Disposal procedures ==
 +
Flushing used etchant down the drain is a bad idea (and usually illegal) because copper ion is toxic. The usual recommended way to dispose of hobbyist amounts of etchant is to convert it to a solid somehow and dispose of the solid in accordance with local laws.
 +
 
 +
== External Links ==
 +
 
 +
* [http://www.instructables.com/id/Sponge-Ferric-Chloride-Method-Etch-Circuit-Bo/ "Sponge + Ferric Chloride Method -- Etch PCBs in One Minute!"]
 +
* [http://www.k9spud.com/wiki/PCB:Etchants Ferric Chloride vs. Ammonium Persulfate] and other etching chemicals.
 +
* [http://members.optusnet.com.au/~eseychell/PCB/etching_CuCl/index.html Etching with Air Regenerated Acid Cupric Chloride] — an excellent in-depth page on acid cupric chloride etching by Adam Seychell.
 +
* [http://www.esmonde-white.com/home/diversions/etching-a-copper-pcb Etching a Copper PCB with HCl and H2O2]
 +
*[http://www.mgchemicals.com/index.html MG Chemicals]A possible source?
 +
* [http://reprap.org/wiki/MakePCBInstructions RepRap wiki: Make PCB instructions]
 +
 
 +
== Internal Links ==
 +
 
 +
 
 +
*[[Toner Transfer]]
 +
*[[Techniques]]
 +
*[[Eagle Links]]
 +
 
 +
 
 +
[[Category:Techniques]]

Revision as of 08:16, 26 June 2013

Chemical etching is one step of some popular PCB fabrication techniques.

In this technique,

  • one starts with a copper-clad board.
  • one puts a mask over all the copper he want to keep. There are a variety of ways to do this -- see Toner Transfer and Photoetching.
  • one removes the parts he don't want to keep, by chemically etching away the copper.
  • cleanup: wash off the board in the sink; carefully store or dispose of the acid.

There are a lot of different chemical techniques for doing this, each with its own advantages and drawbacks.

None of these chemicals is incredibly dangerous, but they can all be toxic or caustic, and should be treated with care. Eye protection and gloves are a very good idea. Before you start, make sure you know how dangerous each chemical is, and figure out what you will need to do if you spill it or get it on yourself. Washing with plenty of water is usually a good start. For some chemicals you may want to keep a neutralizing agent handy. An MSDS (Materials Safety Data Sheet) for the chemical will give you some basic information.

vinegar and salt

Ferric Chloride

This is the most common hobbyist etchant. Ferric chloride, FeCl3, is a brownish substance. It's usually sold in a bottle (dissolved in water, perhaps with a little acid or peroxide) or as a powder (which you have to dissolve in water).

When in solution, ferric chloride is a ferric ion (Fe3+) and a chloride ion (Cl-). The ferric ion reacts with the metallic copper on the circuit board in a redox reaction, producing a ferrous ion (Fe2+) and cuprous or cupric (Cu1+ or Cu2+) copper. The chlorine is just along for the ride. The copper ion, unlike the metallic copper, is soluble, so it leaves the circuit board and goes into solution. The reaction products form a black sludge which settles to the bottom of the etching tank. After etching enough copper, all your Fe3+ is used up and your solution is full of Cu1+, and you need to get more etchant.

Ammonium Persulfate

Expensive & hard to control and optimize the process parameters (such as specific gravity & pH value).

HydroChloric Acid / Hydrogen Peroxide

Mixing about 1 part HCl (Which can be found at most hardware stores, also known as Muriatic Acid. Ask for concrete cleaner.) into 2 parts Hydrogen peroxide (normally used for cleaning cuts) you can make a fairly powerful etchant. Use gloves and don't breathe the fumes though. This will etch a 3"x5" board in less than 10 minutes. No need to heat it up. I usually like to drill a small hole through the board on a corner and thread a wire or nylon string through to help agitate / remove the board.

When the board is done etching, the etchant will probably look like green kool-aid, from the copper content in it. This stuff is highly corrosive and will burn skin, which is why you should wear gloves. But it is easy to handle, and fairly easy to dispose of. the etchant is easily deactivated with baking soda. Pour enough baking soda into it slowly (to keep it from boiling and overflowing... remember what happens with baking soda/vinegar? ya...) until it is a solid mass, then leave it in the sun to dry. You should contact your local authorities to find out what you should do with it next. Whatever you do, DO NOT dump the stuff down the drain, it will eat through your pipes just like any of the other etchants.

Alternatively, instead of disposing of the etchant, you can re-use it again and again. In fact, after etching a few boards with this solution, you will have successfully made Acid Cupric Chloride (see below). You can also find a detailed tutorial on etching at Muriatic Acid etching tutorial

Sodium Persulfate

More environmentally friendly than ferric chloride. Can monitor the etching as initially clear new etchant solution turns blue from the copper ions.

Acid Cupric Chloride

Dead simple etchant made from ordinary, store-bought chemicals (hydrochloric acid and hydrogen peroxide). Has the advantage that it can be regenerated by bubbling oxygen/air through it, or by adding more H2O2. In addition, it doesn't get used up: the etchant bath simply grows with use (kind of like sourdough starter…) The used etchant also makes a great algecide/pH reducer for your pool (and a whole lot cheaper than that stuff they sell at the pool store).

What you need:

  • 38% Hydrochloric Acid, HCl (available at finer hardware stores or pool supply stores as Muriatic Acid)
  • 3% Hydrogen Peroxide, H2O2 (available from any drug store)
  • Plastic or Glass Pans, Jars, and tongs (no metal)

Directions:

  1. Mix your HCl and H2O2 1:1 in a non-metalic container, making sure to add the acid slowly to the H2O2. DO NOT ADD THE H2O2 TO THE ACID!!!
  2. After you've masked your board, dip it in the solution and constantly agitate. You should notice a dark green cloud start to come from the board almost immedately which quickly dissapears or turns lighter as it gets further from the surface of the board.
  3. Etching should take about 10min depending on the temperature and how well you agitated the etchant. When all of the copper is gone, dip in water to wash off any stray etchant and stop the reaction.
  4. When done etching, save used etchant in a non-metalic container and mark clearly its contents.
  5. If your etchant has become a dark, murky green color, add a little bit of H2O2 or bubble air/O2 through the solution to regenerate it back to a light, transparent green color.

See links at bottom for more information on the chemistry and some pictures of the process.

Disposal procedures

Flushing used etchant down the drain is a bad idea (and usually illegal) because copper ion is toxic. The usual recommended way to dispose of hobbyist amounts of etchant is to convert it to a solid somehow and dispose of the solid in accordance with local laws.

External Links

Internal Links