Chemical Etchants

From OpenCircuits
(Difference between revisions)
Jump to: navigation, search
(HydroChloric Acid / Hydrogen Peroxide)
 
(25 intermediate revisions by 16 users not shown)
Line 1: Line 1:
[http://balluff.nytromobile.info/ balluff] [http://rr-qr160panasonic.embrac.info/ rr-qr160 panasonic] [http://nikewmns.sprag.info/ nike wmns] [http://nikefutbol.rotic.info/ nike futbol] [http://donnematuresex.nytromobile.info/ donne mature sex gratis sul p c] [http://britneynuda.rotic.info/ britney nuda] [http://fotoadolescenti.sprag.info/ Foto adolescenti] [http://teapa.boyro.info/ teapa] [http://costruirecitta.rotic.info/ costruire citta] [http://scambiofotografie.rotic.info/ scambio fotografie] [http://ronyon.info/ ronyon.info] [http://taylorquartet.rotic.info/ taylor quartet] [http://kenwood6200.scypus.info/ kenwood 6200] [http://maipiusenzate.berhym.info/ mai piu senza te] [http://turnertinaallthe.nytromobile.info/ turner tina all the best] [http://compravenditadi.embrac.info/ compra vendita di go kart tra privati] [http://easysharez7590.boyro.info/ easyshare z7590 kodak] [http://stampantiepson.sprag.info/ stampanti epson stylus color] [http://bubletroble.berhym.info/ buble troble] [http://eminembox.ronyon.info/ eminem box] [http://onoriallabandiera.unbak.info/ onori alla bandiera] [http://t290isony.unbak.info/ t290i sony] [http://berhym.info/index6_666.html home] [http://vietnammorteorange.sprag.info/ vietnam morte orange] [http://embrac.info/ embrac.info] [http://sprag.info/index7_666.html map] [http://usbadattatori.rotic.info/ usb adattatori] [http://markadventures.sprag.info/ mark adventures] [http://filmwasabi.sprag.info/ film wasabi] [http://esmeraldatelenovelas.nytromobile.info/ esmeralda telenovelas] [http://apreslaclasse.boyro.info/ apre s la classe] [http://garciniacambogia.unbak.info/ Garcinia cambogia] [http://broadwayticket.rotic.info/ broadway ticket] [http://sintnicolaas.rotic.info/ sint nicolaas] [http://offertediviaggio.ercast.info/ offerte di viaggio] [http://sincebyman.boyro.info/ since by man] [http://cdtheessential.embrac.info/ cd the essential michael jackson] [http://cielofedericovega.nytromobile.info/ cielo federico vega] [http://atir430.berhym.info/ ati r430] [http://calciomercatocom.unbak.info/ Calciomercato com] [http://m20vol6.berhym.info/ m20 vol 6] [http://ssuperporno.sprag.info/ ssuper porno] [http://ladymature.nytromobile.info/ Lady mature] [http://virtualme.boyro.info/ virtual me] [http://neardeath.rotic.info/ near death] [http://rigonrigondirigon.nytromobile.info/ rigon  rigon di rigon davide] [http://oguarracino.rotic.info/ o guarracino] [http://mondocannibale.unbak.info/ mondo cannibale] [http://dreambox7020.ronyon.info/ dreambox 7020 decoder] [http://stikn.unbak.info/ stikn] [http://quelcunmadit.ronyon.info/ quelc un m a dit] [http://fiatpandajolly.embrac.info/ fiat panda jolly] [http://ladecimavittima.nytromobile.info/ la decima vittima] [http://kaczmarskimury.ronyon.info/ kaczmarski mury] [http://hotelanticomoro.embrac.info/ hotel antico moro] [http://climatizzatore.sprag.info/ Climatizzatore mitsubishi dual mxz 2a] [http://carrozzeria18delta.nytromobile.info/ carrozzeria 1 8 delta] [http://videoomicidio.scypus.info/ video omicidio baldoni] [http://berhym.info/index6_666.html home] [http://wwwfilimeit.unbak.info/ www filime it] [http://canonmv880x.unbak.info/ canon mv 880x] [http://farho.embrac.info/ farho] [http://dvdram80mm.ronyon.info/ dvd ram 80mm] [http://satelliti51.rotic.info/ satelliti 5 1] [http://duescattiperindiana.nytromobile.info/ due scatti per indiana jones] [http://scypus.info/ scypus.info] [http://sprag.info/index2_250.html homepage] [http://triang.scypus.info/ triang] [http://pelleterie.boyro.info/ pelleterie] [http://johnnycash.berhym.info/ johnny cash] [http://calciomercato.embrac.info/ calciomercato 2004] [http://nardielettrodomestici.berhym.info/ nardi elettrodomestici] [http://testoemusica.berhym.info/ testo e musica della canzone this love] [http://immaginivideoedettagli.berhym.info/ immagini video e dettagli per dragon quest viii] [http://lesbico.sprag.info/ lesbico] [http://erielago.nytromobile.info/ erie lago-] [http://californiathe.rotic.info/ california the o c] [http://flans.unbak.info/ flans] [http://gioiellerie.embrac.info/ gioiellerie] [http://ipodusbigenerazione.sprag.info/ ipod usb i generazione] [http://mitragliatore.boyro.info/ mitragliatore] [http://melissapuente.nytromobile.info/ melissa puente] [http://testocanzonein.nytromobile.info/ testo canzone in italiano she will be lov] [http://cercalilmotore.unbak.info/ cerca lil motore di ricerca google] [http://rotic.info/ rotic.info] [http://femar.ercast.info/ femar] [http://televisorialplasma.embrac.info/ televisori al plasma 42 samsung] [http://wwwterracom.scypus.info/ www terra com] [http://downloadonline.scypus.info/ download online music] [http://arbaleteinofferta.embrac.info/ arbalete in offerta] [http://wwwpollypocket.embrac.info/ www polly pocket com] [http://tuvuo.nytromobile.info/ tu vuo] [http://spillaorogiallo.ercast.info/ Spilla oro giallo] [http://tangledupin.ronyon.info/ tangled up in me skye sweetnam] [http://opelastracdx.embrac.info/ opel astra cdx] [http://docecascabeles.embrac.info/ doce cascabeles] [http://insatiable.embrac.info/ insatiable] [http://faustolealimidi.ronyon.info/ fausto leali midi] [http://cameracomo.ercast.info/ camera como] [http://sarabanda.embrac.info/ sarabanda] [http://emil.enridged.info/ emil] [http://wwwdoorscom.prepubic.info/ www doors com] [http://prepubic.info/ prepubic.info] [http://draganbal.be-header.info/ dragan bal] [http://pigro.prepubic.info/ pigro] [http://moenahotel.be-header.info/ moena hotel] [http://zeetvkeys.unveiler.info/ zee tv keys] [http://tocadrive.unveiler.info/ toca drive] [http://filchery.info/ filchery.info] [http://enbus-she.info/ enbus-she.info] [http://boluke.mosaical.info/ bo luke] [http://ei.gymnite.info/ ei] [http://vee.unveiler.info/ vee] [http://peugeot.loimic.info/ peugeot] [http://duopro1gb.enbus-she.info/ duo pro 1gb] [http://mudd.enbus-she.info/ mudd] [http://annapanka.enbus-she.info/ anna panka] [http://doom3xbox.ismene.info/ doom 3 xbox] [http://wwwacrobatreader.prepubic.info/ www acrobat reader com] [http://carpo.unveiler.info/ carpo] [http://asusmypalma730.prepubic.info/ asus mypalm a730] [http://sevenheven.muggars.info/ seven heven] [http://golf.filchery.info/ golf] [http://deepthroat.enridged.info/ deepthroat] [http://piris.mosaical.info/ piris] [http://notebookhpcompaq.derided.info/ notebook hp compaq nx6110] [http://downloadopaopa.enbus-she.info/ download opa opa] [http://philipscrt107e61.ismene.info/ philips crt 107e61] [http://rokandroll.ismene.info/ rok and roll] [http://secae.derided.info/ secae] [http://enbus-she.info/ enbus-she.info] [http://belinea15lcd.filchery.info/ belinea 15 lcd] [http://weiderpro9350.melonite.info/ weider pro 9350] [http://icoopass.muggars.info/ icoo pass] [http://blackagepies.unveiler.info/ black age pies] [http://inescudnaewa.loimic.info/ Ines cudna ewa sonnet] [http://radeon9800se.derided.info/ radeon 9800 se 256 mb] [http://videoozon.mosaical.info/ video ozon] [http://nhl2006.ismene.info/ nhl  2006] [http://mosaical.info/ mosaical.info] [http://acerpd725p.gymnite.info/ acer pd725p] [http://myeartwillgo.muggars.info/ my eart will go on] [http://portawebcam.gymnite.info/ porta webcam] [http://usherjustlikeme.muggars.info/ usher just like me] [http://orsogrill.enridged.info/ orsogrill] [http://goldnight.be-header.info/ gold night] [http://eammon.muggars.info/ eammon] [http://easy32.serfages.info/ easy 32] [http://figcsgs.prepubic.info/ figc sgs] [http://jimmynail.serfages.info/ jimmy nail] [http://ipromisedmyself.derided.info/ i promised my self] [http://tv169philips.ismene.info/ tv 16 9 philips] [http://pubs.enbus-she.info/ pubs] [http://eilat.melonite.info/ eilat] [http://amdathlon64s939.enbus-she.info/ amd athlon64 s939] [http://goldmainer.enbus-she.info/ gold mainer] [http://beautyfarmhotel.melonite.info/ beauty farm hotel] [http://mistralgagnant.prepubic.info/ mistral gagnant] [http://sapphireradeon.enbus-she.info/ sapphire radeon 9800 se] [http://trekkingpirenei.prepubic.info/ trekking pirenei] [http://kissdp500.muggars.info/ kiss dp 500] [http://wwwvoicesno.serfages.info/ www voices no] [http://gpsmagellan600.melonite.info/ gps magellan 600] [http://tcdc52.unveiler.info/ tc dc52] [http://gymnite.info/ gymnite.info] [http://kangookm0.filchery.info/ kangoo km0] [http://raptor74gb.muggars.info/ raptor 74 gb] [http://kenbigley.derided.info/ ken bigley] [http://jvcdvdrecordervhs.mosaical.info/ jvc dvd recorder vhs] [http://freewebcam.gymnite.info/ free webcam] [http://tv100hz.be-header.info/ tv 100 hz] [http://miracleshappen.mosaical.info/ miracles happen] [http://goodmans51.ismene.info/ goodmans 5 1] [http://fms051xx.prepubic.info/ fms 051 xx] [http://modemtrust.muggars.info/ modem trust] [http://sm710t.aniakudo.info/ sm 710t] [http://s602fujifilm.loimic.info/ s602 fujifilm] [http://dard.enridged.info/ dard] [http://googoodolls.prepubic.info/ goo goo dolls] [http://traviswalking.gymnite.info/ travis walking down the hill] [http://fell.be-header.info/ fell] [http://nauvoo.enbus-she.info/ nauvoo] [http://samsungsf345tp.melonite.info/ samsung sf 345tp] [http://rapepreteens.enbus-she.info/ rape pre teens] [http://franksadventure.ismene.info/ frank s adventure] [http://mosaical.info/ mosaical.info] [http://dopwar.be-header.info/ dop war] [http://theludlows.prepubic.info/ the ludlows] [http://microsharp.muggars.info/ micro sharp] [http://ismene.info/ ismene.info] [http://wwwtreeviewcom.serfages.info/ www treeview com] [http://mousetrust.unveiler.info/ mouse trust] [http://rimjob.muggars.info/ Rimjob] [http://nx6110py500et.serfages.info/ nx6110 py500et] [http://be-header.info/ be-header.info] [http://chasm2.serfages.info/ chasm 2] [http://razrv3neroblack.mosaical.info/ razr v3 nero black] [http://gto.gymnite.info/ gto] [http://gabilunca.serfages.info/ gabi lunca] [http://wwwadobereader.gymnite.info/ www adobe reader com] {{stub}}
+
{{stub}}
  
After masking off the parts of the copper-clad board you want to keep, you need to remove the parts you don't want to keep. This is usually done by chemically etching away the copper. There are a lot of different chemical techniques for doing this, each with its own advantages and drawbacks.
+
Chemical etching is one step of some popular [[techniques | PCB fabrication techniques]].
 +
 
 +
In this technique,
 +
* one starts with a copper-clad board.
 +
* one puts a mask over all the copper he want to keep. There are a variety of ways to do this -- see [[Toner Transfer]] and [[Photoetching]].
 +
* one removes the parts he don't want to keep, by chemically etching away the copper.
 +
* cleanup: wash off the board in the sink; carefully store or dispose of the acid.
 +
 
 +
There are a lot of different chemical techniques for doing this, each with its own advantages and drawbacks.
  
 
None of these chemicals is incredibly dangerous, but they can all be toxic or caustic, and should be treated with care. Eye protection and gloves are a very good idea. Before you start, make sure you know how dangerous each chemical is, and figure out what you will need to do if you spill it or get it on yourself. Washing with plenty of water is usually a good start. For some chemicals you may want to keep a neutralizing agent handy. An MSDS (Materials Safety Data Sheet) for the chemical will give you some basic information.
 
None of these chemicals is incredibly dangerous, but they can all be toxic or caustic, and should be treated with care. Eye protection and gloves are a very good idea. Before you start, make sure you know how dangerous each chemical is, and figure out what you will need to do if you spill it or get it on yourself. Washing with plenty of water is usually a good start. For some chemicals you may want to keep a neutralizing agent handy. An MSDS (Materials Safety Data Sheet) for the chemical will give you some basic information.
 +
 +
== vinegar and salt ==
 +
 +
* [http://www.kobakant.at/DIY/?p=2575 How to get what you want: Salt and Vinegar Etching]
 +
* [http://www.flickr.com/photos/jeanbaptisteparis/4831465916/ smt pcb with Salt and Vinegar]
 +
* [http://www.instructables.com/id/The-Saltwater-etch-process/ The Saltwater etch process]
 +
* [http://www.electro-tech-online.com/general-electronics-chat/33876-electro-etching-no-acid.html electro etching a PCB with vinegar, salt, and a 12 V power supply] (the copper etched off the PCB is plated on the anode?) -- however, other people claim that "You should not be using any acids (or basic 'acids') with your [electro] etcher at all. No FeCl no vinegar, etc ".[http://www.bladeforums.com/forums/showthread.php?t=671936]
  
 
== Ferric Chloride ==
 
== Ferric Chloride ==
 
This is the most common hobbyist etchant. Ferric chloride, FeCl<sub>3</sub>, is a brownish substance. It's usually sold in a bottle (dissolved in water, perhaps with a little acid or peroxide) or as a powder (which you have to dissolve in water).
 
This is the most common hobbyist etchant. Ferric chloride, FeCl<sub>3</sub>, is a brownish substance. It's usually sold in a bottle (dissolved in water, perhaps with a little acid or peroxide) or as a powder (which you have to dissolve in water).
  
When in solution, ferric chloride is a ferric ion (Fe<sup>3 </sup>) and a chloride ion (Cl<sup>-</sup>). The ferric ion reacts with the metallic copper on the circuit board in a redox reaction, producing a ferrous ion (Fe<sup>2 </sup>) and cuprous or cupric (Cu<sup>1 </sup> or Cu<sup>2 </sup>) copper. The chlorine is just along for the ride. The copper ion, unlike the metallic copper, is soluble, so it leaves the circuit board and goes into solution. The reaction products form a black sludge which settles to the bottom of the etching tank. After etching enough copper, all your Fe<sup>3 </sup> is used up and your solution is full of Cu<sup>1 </sup>, and you need to get more etchant.
+
When in solution, ferric chloride is a ferric ion (Fe<sup>3+</sup>) and a chloride ion (Cl<sup>-</sup>). The ferric ion reacts with the metallic copper on the circuit board in a redox reaction, producing a ferrous ion (Fe<sup>2+</sup>) and cuprous or cupric (Cu<sup>1+</sup> or Cu<sup>2+</sup>) copper. The chlorine is just along for the ride. The copper ion, unlike the metallic copper, is soluble, so it leaves the circuit board and goes into solution. The reaction products form a black sludge which settles to the bottom of the etching tank. After etching enough copper, all your Fe<sup>3+</sup> is used up and your solution is full of Cu<sup>1+</sup>, and you need to get more etchant.
  
 
== Ammonium Persulfate ==
 
== Ammonium Persulfate ==
Expensive
+
Expensive & hard to control and optimize the process parameters (such as specific gravity & pH value).
 +
 
 +
== HydroChloric Acid / Hydrogen Peroxide ==
 +
 
 +
Mixing about 1 part HCl (Which can be found at most hardware stores, also known as Muriatic Acid. Ask for concrete cleaner.) into 2 parts Hydrogen peroxide (normally used for cleaning cuts) you can make a fairly powerful etchant. Use gloves and don't breathe the fumes though. This will etch a 3"x5" board in less than 10 minutes. No need to heat it up. I usually like to drill a small hole through the board on a corner and thread a wire or nylon string through to help agitate / remove the board.
 +
 
 +
When the board is done etching, the etchant will probably look like green kool-aid, from the copper content in it. This stuff is highly corrosive and will burn skin, which is why you should wear gloves. But it is easy to handle, and fairly easy to dispose of. the etchant is easily deactivated with baking soda. Pour enough baking soda into it slowly (to keep it from boiling and overflowing... remember what happens with baking soda/vinegar? ya...) until it is a solid mass, then leave it in the sun to dry. You should contact your local authorities to find out what you should do with it next. Whatever you do, DO NOT dump the stuff down the drain, it will eat through your pipes just like any of the other etchants.
 +
 
 +
Alternatively, instead of disposing of the etchant, you can re-use it again and again. In fact, after etching a few boards with this solution, you will have successfully made [[Chemical Etchants#Acid Cupric Chloride|Acid Cupric Chloride]] (see below).
 +
You can also find a detailed tutorial on etching at [http://robotplatform.com/howto/pcb%20etching/pcb_etching_1.html Muriatic Acid etching tutorial]
 +
 
 +
== Sodium Persulfate ==
 +
More environmentally friendly than ferric chloride.  Can monitor the etching as initially clear new etchant solution turns blue from the copper ions.
 +
 
 +
== Acid Cupric Chloride ==
 +
Dead simple etchant made from ordinary, store-bought chemicals (hydrochloric acid and hydrogen peroxide). Has the advantage that it can be regenerated by bubbling oxygen/air through it, or by adding more H<sub>2</sub>O<sub>2</sub>. In addition, it doesn't get used up: the etchant bath simply grows with use (kind of like sourdough starter…)
 +
The used etchant also makes a great algecide/pH reducer for your pool (and a whole lot cheaper than that stuff they sell at the pool store).
 +
 
 +
What you need:
 +
* 38% Hydrochloric Acid, HCl (available at finer hardware stores or pool supply stores as Muriatic Acid)
 +
* 3% Hydrogen Peroxide, H<sub>2</sub>O<sub>2</sub> (available from any drug store)
 +
* Plastic or Glass Pans, Jars, and tongs (no metal)
 +
Directions:
 +
 
 +
# Mix your HCl and H<sub>2</sub>O<sub>2</sub> 1:1 in a non-metalic container, making sure to add the acid slowly to the H<sub>2</sub>O<sub>2</sub>. DO NOT ADD THE H<sub>2</sub>O<sub>2</sub> TO THE ACID!!!
 +
# After you've masked your board, dip it in the solution and constantly agitate. You should notice a dark green cloud start to come from the board almost immedately which quickly dissapears or turns lighter as it gets further from the surface of the board.
 +
# Etching should take about 10min depending on the temperature and how well you agitated the etchant. When all of the copper is gone, dip in water to wash off any stray etchant and stop the reaction.
 +
# When done etching, save used etchant in a non-metalic container and mark clearly its contents.
 +
# If your etchant has become a dark, murky green color, add a little bit of H<sub>2</sub>O<sub>2</sub> or bubble air/O<sub>2</sub> through the solution to regenerate it back to a light, transparent green color.
 +
See links at bottom for more information on the chemistry and some pictures of the process.
 +
 
 +
== Disposal procedures ==
 +
Flushing used etchant down the drain is a bad idea (and usually illegal) because copper ion is toxic. The usual recommended way to dispose of hobbyist amounts of etchant is to convert it to a solid somehow and dispose of the solid in accordance with local laws.
 +
 
 +
== External Links ==
 +
 
 +
* [http://www.instructables.com/id/Sponge-Ferric-Chloride-Method-Etch-Circuit-Bo/ "Sponge + Ferric Chloride Method -- Etch PCBs in One Minute!"]
 +
* [http://www.k9spud.com/wiki/PCB:Etchants Ferric Chloride vs. Ammonium Persulfate] and other etching chemicals.
 +
* [http://members.optusnet.com.au/~eseychell/PCB/etching_CuCl/index.html Etching with Air Regenerated Acid Cupric Chloride] — an excellent in-depth page on acid cupric chloride etching by Adam Seychell.
 +
* [http://www.esmonde-white.com/home/diversions/etching-a-copper-pcb Etching a Copper PCB with HCl and H2O2]
 +
*[http://www.mgchemicals.com/index.html MG Chemicals]A possible source?
 +
* [http://reprap.org/wiki/MakePCBInstructions RepRap wiki: Make PCB instructions]
 +
 
 +
== Internal Links ==
 +
 
 +
 
 +
*[[Toner Transfer]]
 +
*[[Techniques]]
 +
*[[Eagle Links]]
 +
 
 +
 
 +
[[Category:Techniques]]

Latest revision as of 07:16, 26 June 2013

Chemical etching is one step of some popular PCB fabrication techniques.

In this technique,

  • one starts with a copper-clad board.
  • one puts a mask over all the copper he want to keep. There are a variety of ways to do this -- see Toner Transfer and Photoetching.
  • one removes the parts he don't want to keep, by chemically etching away the copper.
  • cleanup: wash off the board in the sink; carefully store or dispose of the acid.

There are a lot of different chemical techniques for doing this, each with its own advantages and drawbacks.

None of these chemicals is incredibly dangerous, but they can all be toxic or caustic, and should be treated with care. Eye protection and gloves are a very good idea. Before you start, make sure you know how dangerous each chemical is, and figure out what you will need to do if you spill it or get it on yourself. Washing with plenty of water is usually a good start. For some chemicals you may want to keep a neutralizing agent handy. An MSDS (Materials Safety Data Sheet) for the chemical will give you some basic information.

Contents

[edit] vinegar and salt

[edit] Ferric Chloride

This is the most common hobbyist etchant. Ferric chloride, FeCl3, is a brownish substance. It's usually sold in a bottle (dissolved in water, perhaps with a little acid or peroxide) or as a powder (which you have to dissolve in water).

When in solution, ferric chloride is a ferric ion (Fe3+) and a chloride ion (Cl-). The ferric ion reacts with the metallic copper on the circuit board in a redox reaction, producing a ferrous ion (Fe2+) and cuprous or cupric (Cu1+ or Cu2+) copper. The chlorine is just along for the ride. The copper ion, unlike the metallic copper, is soluble, so it leaves the circuit board and goes into solution. The reaction products form a black sludge which settles to the bottom of the etching tank. After etching enough copper, all your Fe3+ is used up and your solution is full of Cu1+, and you need to get more etchant.

[edit] Ammonium Persulfate

Expensive & hard to control and optimize the process parameters (such as specific gravity & pH value).

[edit] HydroChloric Acid / Hydrogen Peroxide

Mixing about 1 part HCl (Which can be found at most hardware stores, also known as Muriatic Acid. Ask for concrete cleaner.) into 2 parts Hydrogen peroxide (normally used for cleaning cuts) you can make a fairly powerful etchant. Use gloves and don't breathe the fumes though. This will etch a 3"x5" board in less than 10 minutes. No need to heat it up. I usually like to drill a small hole through the board on a corner and thread a wire or nylon string through to help agitate / remove the board.

When the board is done etching, the etchant will probably look like green kool-aid, from the copper content in it. This stuff is highly corrosive and will burn skin, which is why you should wear gloves. But it is easy to handle, and fairly easy to dispose of. the etchant is easily deactivated with baking soda. Pour enough baking soda into it slowly (to keep it from boiling and overflowing... remember what happens with baking soda/vinegar? ya...) until it is a solid mass, then leave it in the sun to dry. You should contact your local authorities to find out what you should do with it next. Whatever you do, DO NOT dump the stuff down the drain, it will eat through your pipes just like any of the other etchants.

Alternatively, instead of disposing of the etchant, you can re-use it again and again. In fact, after etching a few boards with this solution, you will have successfully made Acid Cupric Chloride (see below). You can also find a detailed tutorial on etching at Muriatic Acid etching tutorial

[edit] Sodium Persulfate

More environmentally friendly than ferric chloride. Can monitor the etching as initially clear new etchant solution turns blue from the copper ions.

[edit] Acid Cupric Chloride

Dead simple etchant made from ordinary, store-bought chemicals (hydrochloric acid and hydrogen peroxide). Has the advantage that it can be regenerated by bubbling oxygen/air through it, or by adding more H2O2. In addition, it doesn't get used up: the etchant bath simply grows with use (kind of like sourdough starter…) The used etchant also makes a great algecide/pH reducer for your pool (and a whole lot cheaper than that stuff they sell at the pool store).

What you need:

  • 38% Hydrochloric Acid, HCl (available at finer hardware stores or pool supply stores as Muriatic Acid)
  • 3% Hydrogen Peroxide, H2O2 (available from any drug store)
  • Plastic or Glass Pans, Jars, and tongs (no metal)

Directions:

  1. Mix your HCl and H2O2 1:1 in a non-metalic container, making sure to add the acid slowly to the H2O2. DO NOT ADD THE H2O2 TO THE ACID!!!
  2. After you've masked your board, dip it in the solution and constantly agitate. You should notice a dark green cloud start to come from the board almost immedately which quickly dissapears or turns lighter as it gets further from the surface of the board.
  3. Etching should take about 10min depending on the temperature and how well you agitated the etchant. When all of the copper is gone, dip in water to wash off any stray etchant and stop the reaction.
  4. When done etching, save used etchant in a non-metalic container and mark clearly its contents.
  5. If your etchant has become a dark, murky green color, add a little bit of H2O2 or bubble air/O2 through the solution to regenerate it back to a light, transparent green color.

See links at bottom for more information on the chemistry and some pictures of the process.

[edit] Disposal procedures

Flushing used etchant down the drain is a bad idea (and usually illegal) because copper ion is toxic. The usual recommended way to dispose of hobbyist amounts of etchant is to convert it to a solid somehow and dispose of the solid in accordance with local laws.

[edit] External Links

[edit] Internal Links

Personal tools
Namespaces

Variants
Actions
Navigation
Toolbox