Editing 24" Wall Clock

{| align=right
|-
| 
[[Image:Sign light Three 400x400.jpg|Light Sticks]]
|}
Site - very comprehensive and meticulous from all points of view, it�s good!
Just excellent website, I'm sure! 

[http://www.guestbook.at/gb/gast/index.php?buchid=atrophies66 philadelphia gay massage] | 
[http://icehousee5e.www2.prexon.nl/ nude gay boys] | 
[http://www.gb-x.de/gbuch.php?forum_id=76255 hot gay guy] | 
[http://vesturing.grafbb.com hard gay men]

I just don't have much to say lately.
Eh. Not much on my mind lately.  

[http://interface0.conforums.com/ lesbian scene] | 
[http://parolee7.megabb.com lesb] | 
[http://www.gb-x.de/gbuch.php?forum_id=76257 forced lesbian] | 
[http://suite.bb-fr.com lesbian tribadism]

===Clock Control===
Who wants to set the real time when we've got GPS to set it for us?! :) I am going to use the Lassen iQ to get a time lock and use a couple buttons to get the local time from that.

We need to control 23 channels <b>18:88</b>:
*<b>1</b> has two segments, but the entire number is either on or off
*<b>:</b> is always on, but we may way to flash it for seconds
*<b>888</b> 21 channels

I decided on 25 channels just in case I need some extra [[http://www.bullshitjob.com/officespace/ 'flare']]. Perhaps an alarm of sorts. 'Beer Time' alarm at 4:30pm? We've got to keep our options open...

The need for 25 I/O pushed me towards the PIC 16F877A:
*Easy to program (I've got a big code base)
*Has enough I/O
*It can be bootloaded!
*It's got an RTC (when you add an external 32.768kHz xtal)
*UART to read the incoming GPS NMEA from Lassen iQ


ToDo : It's possible to reduce the number of channels by multiplexing. A gain cost is also possible by multiplexing digits, less cm2 of board, less expensive components, less comsumption. 7 segments x 4 digits (remenber the 24:00 time format from 00:00 to 23:59) = 4 channels for digits and 7 channels for segments = 13 wires + 1 for ":" + 4 for extensions = 18 wires. Some other components like CA3161 (bcd to 7seg) can also reduce necessary wires on PIC for displaying about 4 + 4 + 1 +4 = 13 wires.
----

===Light Control===
Well if the PIC 16F877A has got the timing and control down, how exactly do we turn on/off the light stick?

Since the sticks only pull 60mA, we can use cheap BJT transistors. Let's go solid state! Many itty-bitty SOT-23 SMD BJTs can handle up to 1A with a max input of 40V. The maximum power output is 350mW though. Luckily, when forward biased, the MMBT2222 has around 0.5V drop. 

So 60mA with 0.5V drop, we are looking at 30mW dissapation. That's atleast in theory. I'll believe it when I see it of course. For the time being, I'm going to assume this will work...

All I need is an NPN BJT for each channel:

[[Image:Clock-Channel.jpg]]

While this should work, it's going to leave a bunch of connections with one pin 'hot'. A better design would probably utilize a PNP connected to RAW. Ehh - no big deal.

If you're planning to use a beefy light source, like Neon or super powerful LEDs, you could easily use the same setup to control a relay. [[Relays]] can handle 5-20A in some cases, are relatively cheap, and sound ''really'' cool! The only problem is they are big. And for this project, we wanted a relatively small control board. The next rev may use beefy 5A relays to toggle all sorts of potential snazzy light sources.
----
===Board Layout===
The PIC is connected to 25 channels, the GPS, a couple buttons, and a status LED. Here's the current layout in all its random glory:

[[Image:Clock-Layout.jpg|500px]]

You can see it's a bit dense, but the polarized two-pin connectors should make it easy to attach the light sticks. Everything was SMD to ease the assembly as much as possible. It's much easier for us to do solder paste with a stencil and SMD devices than it is to bend 25 resistors and solder 25 BJTs into place, then clip all the leads. PTH is actually pretty time consuming. I digress...

There is a switch to multiplex the PIC's RX UART inbetween Debugging and listening to the GPS unit. Be sure to use Port 2 on the Lassen iQ if you want NMEA output (4800bps by default).
----

===Things to Improve===

Nothing at the moment. We have to wait for all the parts to come in. Should be about 4 weeks.

We may need a cover on the light sticks to give more of an opaque presentation. TBD.
----
===Documents===
[[Media:SFE-Wall-Clock.pdf|SFE Wall Clock Main Board Schematic]]

[[Media:SFE-Wall-Clock-Channels.pdf|Channel Control Schematic]]

<b>Footprints:</b><br>
[[SFE_Footprint_Library|SFE Footprint Library]]

FP Name: All sorts of FPs used.

<b>Supplier Info:</b><br>

<b>Related Items:</b><br>


[[Category:Projects]]
@@ Line 4: / Line 4: @@
 [[Image:Sign light Three 400x400.jpg|Light Sticks]]
 |}
-===Project Scope===
+Site - very comprehensive and meticulous from all points of view, it�s good!
-<b>Description:</b><br> Sometime ago a friend challenged us to build a 6 foot digital clock - just like the alarm clock next to your bed. Well, because of scaling issues, 6 foot was a bit too expensive. Instead, we are going with a 2 foot clock. I'm not entire sure about the end size, but you get the idea. And just to be geeky, let's use GPS to snag the time with 100ns accuracy.
+Just excellent website, I'm sure!
-The control system is fairly straight foward. Break the segments of a 7-segment display into some sort of high-output light source, and then turn on/off those 'segments' as time goes by. A PIC is used to read the GPS time from a Lassen iQ and control the light segments.
+[http://www.guestbook.at/gb/gast/index.php?buchid=atrophies66 philadelphia gay massage] |
+[http://icehousee5e.www2.prexon.nl/ nude gay boys] |
+[http://www.gb-x.de/gbuch.php?forum_id=76255 hot gay guy] |
+[http://vesturing.grafbb.com hard gay men]
-[[Image:LED7SEGLG 300.jpg|150px]]
+I just don't have much to say lately.
+Eh. Not much on my mind lately.
-Here is an example of the customary 7-segment display. We aren't going to copy this directly, but close.
+[http://interface0.conforums.com/ lesbian scene] |
+[http://parolee7.megabb.com lesb] |
-We need to use something to illuminate each segment of the display. How about a light bar. What's a light bar? Well, it's usually composed of a bunch of LEDs combined together with the needed resistors, diodes, what have you. We could build our own, but I'm lazy and [[http://www.besthongkong.com/ Best Hong Kong]] has something called a ''Sign Light Module'' that looks like it could do the job really well, for only $2.39 a piece! That's cheaper than I can put a stick together, so I put 50pcs on order. We'll see how they look when they come in.
+[http://www.gb-x.de/gbuch.php?forum_id=76257 forced lesbian] |
+[http://suite.bb-fr.com lesbian tribadism]
-Here's the plan:
-<b>18:88</b> will be displayed worst case.
-*Each <b>8</b> is made up of 7 segments
-*<b>1</b> is made of 2 segments
-*<b>:</b> is made of 1/2 segments each
-To make the clock slightly larger, we are going to use two light 'sticks' for each segment. Each stick looks like it's about 6" long, which will make a segment aprox. 12", which whill make the number height ~24" overall. Each dot in the ':' will be made out of one stick (6" tall). This may look a bit odd, only time will tell.
-<b>8</b>'s x 7 segments * 2 sticks per segment =  42 sticks<br>
-<b>1</b> x 2 segments * 2 sticks per segment = 4 sticks<br>
-<b>:</b> x 1 segments * 2 sticks per segment = 2 sticks<br>
-sticks needed overall<br>
-Minimum of 23 inidividual control channels needed
-----
-===Power Regulation===
-Quick math : Each stick is 3 LEDs. Each Piranha LED is 20mA according to the website (I don't trust the Hong Kong Website very much, but we'll assume). So each stick is 12V @ 60mA. 50 sticks * 60mA = 3A @ 12V. This is a bit juicy for a wall-wart. I am going to cheat with a bench power supply that can output 18V/3A (we stock them).
-A is really the worst case scenario.  We only have 48 sticks (not 50) and 10:08 seems to be the real time with the most number of segments lit (44 sticks turned on). We obviously should never see a time of 18:88. At 10:08 we'll need 44 * 60mA = 2640mA = 2.6A. Not too horrendous.
-The control board will need some power as well. 5V for logic, 3.3V for GPS. But the overall consumption will be peanuts compare to the lighting. Probably under 50mA for the control board.
-----
 ===Clock Control===
@@ Line 105: / Line 85: @@
 <b>Related Items:</b><br>
-* [[POV display]]
-* [[PointLess LED Array]]
-=== External References ===
-[http://www.sparkfun.com/commerce/tutorial_info.php?tutorials_id=47 Spark Fun 12 Foot Wall Clock]
-The Spark Fun Wall Clock is so big, it is now listed at [http://www.hackersbench.com/giants.html "Registry of Giant Digital Clocks"].
-Congratulations!
 [[Category:Projects]]