Difference between revisions of "Ethernet Module"
Jump to navigation
Jump to search
(→Driver) |
|||
| Line 29: | Line 29: | ||
==Hardware== | ==Hardware== | ||
| − | |||
===Component List=== | ===Component List=== | ||
| − | |||
{|border="1" cellspacing="0" cellpadding="5" | {|border="1" cellspacing="0" cellpadding="5" | ||
! Special Item !! Description !! Quantity | ! Special Item !! Description !! Quantity | ||
| Line 60: | Line 58: | ||
| − | ==Software | + | ==Software Driver=== |
| − | |||
| − | |||
*Download [http://chungyan5.no-ip.org/vc/tags/1.09.03/demo_posix/dspic/drivers/dm9000a.c?root=freertos_posix&view=markup here] | *Download [http://chungyan5.no-ip.org/vc/tags/1.09.03/demo_posix/dspic/drivers/dm9000a.c?root=freertos_posix&view=markup here] | ||
*Base on [http://www.freertos.org/ FreeRTOS] and [http://opencircuits.com/DsPIC30F_5011_Development_Board dsPIC33 platform] | *Base on [http://www.freertos.org/ FreeRTOS] and [http://opencircuits.com/DsPIC30F_5011_Development_Board dsPIC33 platform] | ||
| Line 72: | Line 68: | ||
**'''void dmfe_interrupt(void)''': process the transmit interrupt from DM9000A | **'''void dmfe_interrupt(void)''': process the transmit interrupt from DM9000A | ||
| − | + | ==TCP/IP Stack== | |
| − | + | ===uIP=== | |
| − | + | ===lwIP=== | |
| − | + | ==Ethernet Application== | |
| − | + | ===DHCP=== | |
| − | + | ===Web Server=== | |
Revision as of 22:11, 8 August 2007
Contents
Introduction
- This project aims to develop an Ethernet Module, to be used in conjunction with a 8/16 bits embedded system such as the dsPic33F development board.
- The entire Ethernet Module consists of:
Useful Links
DM9000A
- DM9000A Description
- DM9000A Datasheet
- Application Circuit
- Layout Guidelines
- Application Note
- DM9000A Official Drivers
uIP
lwIP
HTML
- W3 Schools: Learning how to write HTML and JavaScript
- Nvu: Open source HTML Editor
SNMP
Hardware
Component List
| Special Item | Description | Quantity |
|---|---|---|
| DM9000AEP | Ethernet Controller | 1 |
| HR911102A | RJ45 Connector with Integrated Magnetics for 10/100 Base-TX | 1 |
| 93LC46B-I/SN | 1K Serial EEPROM | 1 (Optional) |
| 25MHz Crystal | Crystal | 1 |
| 22pF | For Crystal Use | 2 |
| 220uF | For RXVDD25/TXVDD25 | 1 |
| 49.9ohm | For RX+/RX-/TX+/TX- | 4 |
| 6.8kohm | For BGRES/BGGND | 1 |
| 510ohm | For LEDs | 2 |
Circuit and PCB
in gEDA format and its gEDA sym and footprints
Software Driver=
- Download here
- Base on FreeRTOS and dsPIC33 platform
- Using POSIX-like API:
- int dmfe_open(int flags): initialize the Ethernet controller for 10MHz Half-Duplex
- int dmfe_close(): turn off the PHY layer
- int dmfe_read(void): copy a packet to the default buffer
- int dmfe_write(unsigned char device, unsigned char *buf, int count): copy count bytes of the data from buf and transmit
- void dmfe_interrupt(void): process the transmit interrupt from DM9000A
