Editing PCB Manufacturers
Jump to navigation
Jump to search
Warning: You are not logged in. Your IP address will be publicly visible if you make any edits. If you log in or create an account, your edits will be attributed to your username, along with other benefits.
The edit can be undone. Please check the comparison below to verify that this is what you want to do, and then save the changes below to finish undoing the edit.
Latest revision | Your text | ||
Line 3: | Line 3: | ||
: ''This page lists "board houses" that take your custom PCB layout file and convert it to a custom printed circuit board (PCB) (ready for the next step: "assembly" adding parts). For "standard" prototyping PCBs, see [[stripboard]] and other [[techniques]].'' | : ''This page lists "board houses" that take your custom PCB layout file and convert it to a custom printed circuit board (PCB) (ready for the next step: "assembly" adding parts). For "standard" prototyping PCBs, see [[stripboard]] and other [[techniques]].'' | ||
− | The | + | The Ladyada PCB Cost Comparison Calculator[http://www.ladyada.net/library/pcb/costcalc.html] is a quick way to compare the (very roughly estimated) price of your board at many of the following fabs. |
− | |||
− | |||
− | |||
− | ''(FIXME: briefly mention the most relevant "capabilities": "preferred" and "minimum" trace width / spacing / via hole size / via pad diameter.'' | + | ''(FIXME: briefly mention the most relevant "capabilities": "preferred" and "minimum" trace width / spacing / via hole size / via pad diameter.'' |
''Link directly to the manufacturer's "capability page" so readers can confirm these numbers for themselves.'' | ''Link directly to the manufacturer's "capability page" so readers can confirm these numbers for themselves.'' | ||
''Boards that push the limit of manufacturability cost more than robustly designed boards that use preferred sizes.) For more details, see [[Submitting PCB's for fabrication]].)'' | ''Boards that push the limit of manufacturability cost more than robustly designed boards that use preferred sizes.) For more details, see [[Submitting PCB's for fabrication]].)'' | ||
Line 19: | Line 16: | ||
− | === | + | === homebrew fabrication === |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
[http://www.instructables.com/id/Make-hobbyist-PCBs-with-professional-CAD-tools-by-/ capabilities]: (see also [[Techniques#Homebrew fabrication]]) | [http://www.instructables.com/id/Make-hobbyist-PCBs-with-professional-CAD-tools-by-/ capabilities]: (see also [[Techniques#Homebrew fabrication]]) | ||
Line 86: | Line 29: | ||
* minimum via: 0.031" (0.8mm) diameter, 0.024" (0.6mm) ring giving 0.080" (2 mm) outer diameter. | * minimum via: 0.031" (0.8mm) diameter, 0.024" (0.6mm) ring giving 0.080" (2 mm) outer diameter. | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | [http://www.pcbtrain.co.uk/ PCB Train] | + | === [http://www.pcbtrain.co.uk/ PCB Train] === |
preferred: ([http://www.pcbtrain.co.uk/schematic/pcbtrain-express/]) | preferred: ([http://www.pcbtrain.co.uk/schematic/pcbtrain-express/]) | ||
Line 329: | Line 52: | ||
PCB Train [http://www.pcbtrain.co.uk/schemantic/quote-and-order-pcb/restart/ Online PCB quote calculator]. Also does PCB assembly. | PCB Train [http://www.pcbtrain.co.uk/schemantic/quote-and-order-pcb/restart/ Online PCB quote calculator]. Also does PCB assembly. | ||
− | === | + | === [http://protoexpress.com Sierra Proto Express] === |
− | |||
− | [http:// | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
preferred: | preferred: | ||
− | + | 15 mils min drill hole diameter | |
6 mil trace/space | 6 mil trace/space | ||
Line 360: | Line 62: | ||
Has free BetterDFM service to check a design before fabbing. | Has free BetterDFM service to check a design before fabbing. | ||
− | |||
− | + | === [http://pad2pad.com/ Pad2Pad.com] === | |
− | |||
− | |||
− | |||
− | |||
− | [http://pad2pad.com/ Pad2Pad.com] | ||
Line 389: | Line 85: | ||
Also has assembly services. | Also has assembly services. | ||
− | === | + | === [http://www.eprotos.com/ Precision Technologies, Inc. - Eprotos.com] === |
− | |||
− | [http://www.eprotos.com/ Precision Technologies, Inc. - Eprotos.com] | ||
Precision Technologies, Inc. - Eprotos.com | Precision Technologies, Inc. - Eprotos.com | ||
capabilities: | capabilities: | ||
− | * | + | * __ trace/space ''(FIXME)'' |
− | |||
− | === PCBWING Technology Co., Ltd. === | + | === [http://www.pcbwing.com/index.php?from=123 PCBWING Technology Co., Ltd. - ] === |
− | + | capabilities: | |
− | + | * __ trace/space ''(FIXME)'' | |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
+ | Online PCB quote calculator ''(FIXME: link?)'' | ||
+ | === [http://www.ultimatepcb.com/ UltimatePCB] === | ||
4-layer boards up to 30 sq in. with 7/7 are $210 for 5, including shipping. Turn time is about 10 days including DHL from China. Service is not as fast as bigger outfits like Advanced Circuits, but still fine. | 4-layer boards up to 30 sq in. with 7/7 are $210 for 5, including shipping. Turn time is about 10 days including DHL from China. Service is not as fast as bigger outfits like Advanced Circuits, but still fine. | ||
− | === | + | === [http://www.batchpcb.com/ BatchPCB] === |
− | |||
− | [http://www.batchpcb.com/ BatchPCB] | ||
* $2.50 / square inch + $10 setup: double-sided with silk screen and solder mask on both side. | * $2.50 / square inch + $10 setup: double-sided with silk screen and solder mask on both side. | ||
Line 436: | Line 120: | ||
Warning: We received wrong hole sizes in two orders, which BatchPCB would not acknowledge or correct even upon several emails containing very clear pictorial evidence of the error. This is very unsatisfactory. | Warning: We received wrong hole sizes in two orders, which BatchPCB would not acknowledge or correct even upon several emails containing very clear pictorial evidence of the error. This is very unsatisfactory. | ||
+ | |||
=== DorkbotPDX PCB order === | === DorkbotPDX PCB order === | ||
− | + | [http://pcb.laen.org/ DorkbotPDX] | |
− | [http:// | ||
is batching PCBs to get lower hobbyist friendly prices. | is batching PCBs to get lower hobbyist friendly prices. | ||
Although this was started primarily for the DorkbotPDX community, it's open to everyone now. | Although this was started primarily for the DorkbotPDX community, it's open to everyone now. | ||
Line 452: | Line 136: | ||
"feel free to drop me an email. I love helping people with their designs." -- [http://pcb.laen.org Laen]. | "feel free to drop me an email. I love helping people with their designs." -- [http://pcb.laen.org Laen]. | ||
− | + | === [http://www.screamingcircuits.com/ Screaming Circuits] === | |
− | |||
− | |||
− | === | ||
− | |||
− | [http://www. | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | === | ||
− | |||
− | |||
''(FIXME:)'' | ''(FIXME:)'' | ||
− | === | + | === [http://www.4pcb.com/ Advanced Circuits] === |
− | |||
− | [http://www.4pcb.com/ Advanced Circuits] | ||
− | |||
− | |||
Online design rule checking. Students can order single PCB's for [http://www.33each.com/ $33 each]. | Online design rule checking. Students can order single PCB's for [http://www.33each.com/ $33 each]. | ||
Line 511: | Line 160: | ||
* minimum pad size: 0.024" (minimum [http://www.4pcb.com/index.php?load=content&page_id=15 0.014" over finished hole size ]) | * minimum pad size: 0.024" (minimum [http://www.4pcb.com/index.php?load=content&page_id=15 0.014" over finished hole size ]) | ||
− | === | + | === [http://www.olimex.com/pcb/ Olimex] === |
− | |||
− | [http://www.olimex.com/pcb/ Olimex] | ||
Bulgarian PCB manufacturer - 24 EUR (~$33) for a 6.3" by 3.9" board. I.E. cheaper than BatchPCB, but with a minimum board size requirement, and a more complicated ordering process. - shipping cost +8.5 EUR(~$12) outside of europe. | Bulgarian PCB manufacturer - 24 EUR (~$33) for a 6.3" by 3.9" board. I.E. cheaper than BatchPCB, but with a minimum board size requirement, and a more complicated ordering process. - shipping cost +8.5 EUR(~$12) outside of europe. | ||
Line 534: | Line 181: | ||
"Tsvetan's idea is that this will encourage people to publish designs and get more good ideas out into the real world for everyone to see." | "Tsvetan's idea is that this will encourage people to publish designs and get more good ideas out into the real world for everyone to see." | ||
− | + | === [http://www.sunstone.com/ Sunstone Circuits] aka [http://www.pcb123.com/ PCB123] === | |
+ | ''(FIXME:)'' | ||
− | + | Sunstone Circuits | |
− | |||
− | |||
− | |||
− | + | Offsers three product lines: | |
− | |||
* Quickturn | * Quickturn | ||
* Full-feature | * Full-feature | ||
− | + | * PCB123 | |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
- [http://www.sunstone.com/QuoteQt.aspx Quickturn] - | - [http://www.sunstone.com/QuoteQt.aspx Quickturn] - | ||
Line 574: | Line 212: | ||
Wide range of capabilities, price depends on exact [http://www.sunstone.com/products-services.aspx specifications]. Instance online quote. | Wide range of capabilities, price depends on exact [http://www.sunstone.com/products-services.aspx specifications]. Instance online quote. | ||
− | + | - [http://www.sunstone.com/PCB123.aspx PCB123] - | |
− | [http://www.pcbexpress.com/ PCBexpress] | + | Sunstone's own free (proprietary) schematic and PCB layout software -- easy to use, but you are locked into using their service unless you're willing to pay $50 for gerber files from them. Integration with ordering system simplifies the process of ordering boards. Unrestricted design size, live quoting of diki-key parts withing the bill of materials view. |
+ | |||
+ | === [http://www.pcbexpress.com/ PCBexpress] === | ||
All orders submitted before noon ship the next day. UPS ground shipping is free. Since they are located in the Portland, OR area this means you can get a board overnight to most places in the Northwest US. | All orders submitted before noon ship the next day. UPS ground shipping is free. Since they are located in the Portland, OR area this means you can get a board overnight to most places in the Northwest US. | ||
Line 586: | Line 226: | ||
PCBexpress is apparently a division of Sunstone Circuits Quickturn service. | PCBexpress is apparently a division of Sunstone Circuits Quickturn service. | ||
− | === | + | === [http://www.pcbfabexpress.com/ PCBFABEXPRESS] === |
− | |||
− | [http://www.pcbfabexpress.com/ PCBFABEXPRESS] | ||
− | |||
− | |||
5 Boards for $60 ($12 ea. for 10 sq. inches) with a 5 day turn time. | 5 Boards for $60 ($12 ea. for 10 sq. inches) with a 5 day turn time. | ||
− | === | + | === [http://www.apcircuits.com AP Circuits] === |
− | |||
− | [http://www.apcircuits.com AP Circuits] | ||
− | |||
− | |||
'''2 boards, 2 layers next day shipping for as low as 7.95 each.''' or '''2 boards, 2 layers, 2 solder masks and legend one side for as low as 9.95 each. 3 Day Service''' | '''2 boards, 2 layers next day shipping for as low as 7.95 each.''' or '''2 boards, 2 layers, 2 solder masks and legend one side for as low as 9.95 each. 3 Day Service''' | ||
Line 605: | Line 237: | ||
Instructions for creating Gerber and NC output from many popular PCB programs are also on this site. | Instructions for creating Gerber and NC output from many popular PCB programs are also on this site. | ||
− | |||
− | [http://www.e-teknet.com/ E-TekNet] | + | === [http://www.e-teknet.com/ E-TekNet] === |
4 2 layer boards for $19.89 each. Great prices for production board runs. Helpful staff. | 4 2 layer boards for $19.89 each. Great prices for production board runs. Helpful staff. | ||
Line 617: | Line 248: | ||
* Very low cost quick turn proto promo prices too | * Very low cost quick turn proto promo prices too | ||
− | === | + | === [http://www.expressPCB.com/ ExpressPCB] === |
− | |||
− | [http://www.expressPCB.com/ ExpressPCB] | ||
− | |||
Free proprietary schematic and layout software, used for all board services (like PCB123). Simplifies the process of getting a board done and out, by vertically integrating the design and production flow. Fewer options and less power, but fewer ways to screw up. | Free proprietary schematic and layout software, used for all board services (like PCB123). Simplifies the process of getting a board done and out, by vertically integrating the design and production flow. Fewer options and less power, but fewer ways to screw up. | ||
*Good deal on small prototypes: Mini-Board Service (3 identical boards, 2.5" X 3.8", doublesided, plated through, no silkscreen or soldermask) is priced well at $51 total, plus $10 shipping. Orders placed by 2PM ET ship the next business day by 2nd Day Air. | *Good deal on small prototypes: Mini-Board Service (3 identical boards, 2.5" X 3.8", doublesided, plated through, no silkscreen or soldermask) is priced well at $51 total, plus $10 shipping. Orders placed by 2PM ET ship the next business day by 2nd Day Air. | ||
Line 629: | Line 257: | ||
*Conclusion: The sweet spot for ExpressPCB is sparse, simple, quickly-designed boards, at low and very high quantities. At any other density or complexity, might as well learn and use Eagle or KiCAD. | *Conclusion: The sweet spot for ExpressPCB is sparse, simple, quickly-designed boards, at low and very high quantities. At any other density or complexity, might as well learn and use Eagle or KiCAD. | ||
− | === | + | === [http://pcbcart.com/ PCBCART] === |
− | |||
− | [http://pcbcart.com/ PCBCART] | ||
− | |||
− | |||
Turnaround ~8days + shipping, instant online quotes. $30 tooling fee, under $2/sq in. | Turnaround ~8days + shipping, instant online quotes. $30 tooling fee, under $2/sq in. | ||
− | |||
− | [http://www.speedypcb.com/ Speedy PCB Prototype] | + | === [http://www.speedypcb.com/ Speedy PCB Prototype] === |
No minimum order, $9.9 for protos, no extra charge for soldermask, silkscreen, E-testing, very low price on 2, 4, 6 layers. | No minimum order, $9.9 for protos, no extra charge for soldermask, silkscreen, E-testing, very low price on 2, 4, 6 layers. | ||
− | === | + | === [http://www.auspienterprises.com AUSPI PCB] === |
− | |||
− | [http://www.auspienterprises.com AUSPI PCB] | ||
− | |||
− | |||
− | |||
online quote and track system. | online quote and track system. | ||
Line 652: | Line 270: | ||
, yukiw@auspienterprises.com | , yukiw@auspienterprises.com | ||
− | === | + | === [http://rocacircuits.com/ Roca Printed Circuits] === |
− | [http://rocacircuits.com/ Roca Printed Circuits] | ||
''(FIXME:)'' | ''(FIXME:)'' | ||
− | === | + | === [http://www.bilex-lp.com/ Bilex LP] === |
− | |||
− | [http://www.bilex-lp.com/ Bilex LP] | ||
− | |||
− | |||
Also offer assembly in THT and SMT. | Also offer assembly in THT and SMT. | ||
Line 667: | Line 280: | ||
''(FIXME:)'' | ''(FIXME:)'' | ||
− | === | + | === [http://www.pcb4u.com/ Accutrace (pcb4u)] === |
− | |||
− | [http://www.pcb4u.com/ Accutrace (pcb4u)] | ||
''(FIXME:)'' | ''(FIXME:)'' | ||
− | |||
− | [http://ourpcb.com/ OurPCB] | + | === [http://ourpcb.com/ OurPCB] === |
[http://ourpcb.com/pcb-price.htm prototype prices]: | [http://ourpcb.com/pcb-price.htm prototype prices]: | ||
Line 690: | Line 300: | ||
* Min. drilling slot size: 0.6mm | * Min. drilling slot size: 0.6mm | ||
− | === PCB-POOL === | + | === [http://pcb-pool.com/ppus/info.html PCB-POOL] === |
+ | ''(FIXME:)'' | ||
− | + | === [http://pcbpro.com/ PCBpro] === | |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | === | ||
− | |||
− | [http://pcbpro.com/ PCBpro] | ||
''(FIXME:)'' | ''(FIXME:)'' | ||
− | === | + | === [http://custompcb.com/ Custom PCB] === |
− | |||
− | [http:// | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | === | ||
− | |||
− | |||
''(FIXME:)'' | ''(FIXME:)'' | ||
− | [http:// | + | === [http://myropcb.com/ Myro PCB] === |
− | |||
− | + | Also does PCB assembly and (some?) parts ordering. | |
− | [http://www. | + | PCB capabilities [http://www.myropcb.com/services-capabilities/pcb-capabilities/]: |
+ | PCBA capabilities [http://www.myropcb.com/services-capabilities/pcba-services/] | ||
− | + | 4 small (max. 30 sq. inch) 2 sided prototype boards for a total of | |
− | + | $80 + $35 shipping | |
− | |||
− | |||
− | + | * Min. track/space 0.1 mm (0.004"). | |
+ | * 0.35 mm via hole (0.014") | ||
+ | * 0.32 mm inner clearance (0.013"). | ||
− | + | === [http://www.pcbnet.com/ Imagineering, Inc.] === | |
− | === | ||
− | |||
− | [http://www.pcbnet.com/ Imagineering, Inc.] | ||
''(FIXME:)'' | ''(FIXME:)'' | ||
Line 753: | Line 335: | ||
* instant online quote | * instant online quote | ||
− | === | + | === [http://www.onboardcircuits.com/ Onboard Circuits] === |
− | |||
− | [http://www.onboardcircuits.com/ Onboard Circuits] | ||
''(FIXME:)'' | ''(FIXME:)'' | ||
Line 763: | Line 343: | ||
* __ trace/space ''(FIXME)'' | * __ trace/space ''(FIXME)'' | ||
− | |||
− | [http://www.gcaero.com/ GC Aero] | + | === [http://www.gcaero.com/ GC Aero] === |
[http://www.gcaero.com/htm/capabilities.htm capabilities:] | [http://www.gcaero.com/htm/capabilities.htm capabilities:] | ||
Line 771: | Line 350: | ||
"GC Aero specializes in the design and manufacture of flexible circuits and completed assemblies." | "GC Aero specializes in the design and manufacture of flexible circuits and completed assemblies." | ||
− | === | + | === [http://www.minco.com/products/flex.aspx Minco] === |
− | |||
− | [http://www.minco.com/products/flex.aspx Minco] | ||
[http://www.minco.com/products/flex.aspx?id=112 capabilities:] | [http://www.minco.com/products/flex.aspx?id=112 capabilities:] | ||
Line 779: | Line 356: | ||
"Minco has the ability to wind flat inductive coils and laminate them within flex circuits." | "Minco has the ability to wind flat inductive coils and laminate them within flex circuits." | ||
− | === | + | === [http://www.uniflexcircuits.com/ Uniflex Circuits] === |
− | |||
− | [http://www.uniflexcircuits.com/ Uniflex Circuits] | ||
− | |||
''(FIXME:)'' | ''(FIXME:)'' | ||
Line 797: | Line 371: | ||
* minimum pad size: 0.038" (calculated from min drill size + 2*annular ring) | * minimum pad size: 0.038" (calculated from min drill size + 2*annular ring) | ||
− | === | + | === [http://pwtpcbs.com/ Printed Wiring Technologies Ltd] === |
− | |||
− | [http://pwtpcbs.com/ Printed Wiring Technologies Ltd] | ||
[http://www.pwtpcbs.com/pwt/index.php?option=com_content&task=view&id=14 capabilities:] | [http://www.pwtpcbs.com/pwt/index.php?option=com_content&task=view&id=14 capabilities:] | ||
Line 820: | Line 392: | ||
* Minimum Inner Clearance: 0.216mm (8.5thou) | * Minimum Inner Clearance: 0.216mm (8.5thou) | ||
− | === | + | === [http://www.seeedstudio.com/depot/pcba-service-c-12.html Seeed Studio] === |
− | [http://www. | + | Hobbyists created studio with PCB/PCBA services, they have outstanding communication among Chinese. They have some $10 offer for rather small board and $89 for combined designs. A very good alternative if you don't need it in a rush, or in large volume. Eagle files are accepted too. |
+ | [http://www.seeedstudio.com/blog/?p=22 "An idea about open source PCBs"]. | ||
+ | [http://www.seeedstudio.com/depot/domino-pcb-service-cost-per-sqcm-p-68.html DOMINO PCB service]: | ||
+ | $49 + $0.12 per sq.cm, . | ||
+ | 2 layers, silk screen both sides, soldermask both sides, free shipping. | ||
− | + | [http://www.seeedstudio.com/depot/propaganda-pcb-service-for-open-source-works-p-111.html Propaganda - PCB service for open source works]: | |
− | * | + | $30 per board, qty 5, max 10cm*10cm each. |
− | + | 2 layers, silk screen both sides, soldermask both sides, +shipping (?) -- must be open-source and allow seeedstudio to offer the boards to others. | |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
=== MicroConnex === | === MicroConnex === | ||
− | |||
− | |||
[http://www.microconnex.com/ MicroConnex] | [http://www.microconnex.com/ MicroConnex] | ||
Line 850: | Line 415: | ||
=== Circuits Unlimited === | === Circuits Unlimited === | ||
− | |||
− | |||
Circuits Unlimited Inc. | Circuits Unlimited Inc. | ||
Line 876: | Line 439: | ||
=== Spirit Circuits === | === Spirit Circuits === | ||
− | |||
− | |||
http://www.spiritcircuits.com/ | http://www.spiritcircuits.com/ | ||
Line 883: | Line 444: | ||
http://www.pcbsnap.com/ | http://www.pcbsnap.com/ | ||
− | + | Special price (free?) on "Naked PCB", a tracks and holes only prototype. | |
[http://www.spiritcircuits.co.uk/capabilities.aspx capabilities:] | [http://www.spiritcircuits.co.uk/capabilities.aspx capabilities:] | ||
Line 895: | Line 456: | ||
* Copper to unconnected drill hole: 0.30 mm minimum == 0.012" (?) | * Copper to unconnected drill hole: 0.30 mm minimum == 0.012" (?) | ||
− | minimum: ??? | + | minimum: |
+ | ??? | ||
=== Gold Phoenix PCB === | === Gold Phoenix PCB === | ||
− | |||
− | |||
http://www.goldphoenixpcb.biz/ | http://www.goldphoenixpcb.biz/ | ||
Line 926: | Line 486: | ||
=== PCB International === | === PCB International === | ||
− | |||
− | |||
Line 949: | Line 507: | ||
HASL Free Finish | HASL Free Finish | ||
− | |||
− | + | == [http://www.internationalcircuits.com/ International Circuits Inc.] == | |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | == | ||
− | |||
− | [http://www.internationalcircuits.com/ International Circuits Inc.] | ||
Also makes flex and aluminum PCBs. | Also makes flex and aluminum PCBs. | ||
Line 994: | Line 528: | ||
http://www.internationalcircuits.com | http://www.internationalcircuits.com | ||
− | |||
=== LEF Electronics Co === | === LEF Electronics Co === | ||
Line 1,002: | Line 535: | ||
FR4 PCBs and Aluminum PCBs. | FR4 PCBs and Aluminum PCBs. | ||
− | === San Francisco Circuits PCB Manufacturing === | + | === [http://www.sanfranciscocircuits.com San Francisco Circuits PCB Manufacturing] === |
− | + | preferred: | |
+ | * ??? | ||
− | - Rigid-Flex PCBs & | + | - Rigid-Flex PCBs & Flex PCBs<br> |
− | |||
− | |||
− | |||
− | |||
− | [ | + | [http://www.sfcircuits.com/get-a-pcb-quote online PCB quote]. |
+ | Also does PCB design, flex PCB fabrication, and PCB assembly. | ||
+ | |||
+ | [http://www.sfcircuits.com/pcb-production-capabilities San Francisco Circuits PCB production capabilities]: | ||
+ | * 1 to 40+ copper layers board | ||
+ | * 3 mil minimum Trace & Space | ||
− | |||
=== Optimatech === | === Optimatech === | ||
Line 1,028: | Line 562: | ||
* __ trace/space ''(FIXME)'' | * __ trace/space ''(FIXME)'' | ||
− | |||
− | [http://www.controltek.com ControlTek] | + | === [http://www.controltek.com ControlTek] === |
[http://www.controltek.com/capabilities]: | [http://www.controltek.com/capabilities]: | ||
Line 1,038: | Line 571: | ||
− | = | + | === Other fab lists === |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | == Other fab lists == | ||
Other web sites with a short list of recommendations: | Other web sites with a short list of recommendations: | ||
Line 1,226: | Line 578: | ||
* [http://forum.sparkfun.com/viewtopic.php?f=16&t=11813 "The dilemmas of prototyping PCB's"] at the Sparkfun forums | * [http://forum.sparkfun.com/viewtopic.php?f=16&t=11813 "The dilemmas of prototyping PCB's"] at the Sparkfun forums | ||
* [http://mightyohm.com/wiki/resources:pcb mightyohm.com wiki: PCB Manufacturers] | * [http://mightyohm.com/wiki/resources:pcb mightyohm.com wiki: PCB Manufacturers] | ||
− | |||
Other web sites with long lists of PWB fabricators: | Other web sites with long lists of PWB fabricators: | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
* http://massmind.org/techref/pcbfabs.htm | * http://massmind.org/techref/pcbfabs.htm | ||
− | * | + | * http://dmoz.org/Business/Electronics_and_Electrical/Contract_Manufacturing/Printed_Circuit_Boards/ |
* [http://chiphacker.com/questions/3760/moderately-priced-6-layer-pcb-fab Chiphacker: moderately priced 6-layer PCB fab?] | * [http://chiphacker.com/questions/3760/moderately-priced-6-layer-pcb-fab Chiphacker: moderately priced 6-layer PCB fab?] | ||
* [http://chiphacker.com/questions/1893/cheap-pcb-manufacture Chiphacker: Cheap PCB manufacture] | * [http://chiphacker.com/questions/1893/cheap-pcb-manufacture Chiphacker: Cheap PCB manufacture] | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
---- | ---- | ||
[[Category:Manufacturers]] | [[Category:Manufacturers]] | ||
[[Category:Suppliers]] | [[Category:Suppliers]] |