Workshop Template

From OpenCircuits
Jump to: navigation, search

This is a draft for a workshop we are working on but which is not yet scheduled. We would like your input, you can email User:Russ_hensel. Watch Meetup for an announcement: [Meetup: South Coast Innovator Labs].

Contents

General

Template Instructions: Delete this.
Got a project you would like to add some motion to?  Then you probably need a motor and a way to control it.  Enter the Arduino, which is a great little brain for a motor.  In this workshop you will learn a bit both about motors and how the Arduino can be used as a controller.  At the end you should know enough to be able to add motion to your project.
......

Preparation/What to Bring

The workshop will go better if you do as much preparation as you can. Some of this is in you head, but also in your computer, and perhaps gathering some stuff. That said if you just want to walk in and absorb what you can that is ok too.

Template Instructions: Delete this.
Got a project you would like to add some motion to?  Then you probably need a motor and a way to control it.  Enter the Arduino, which is a great little brain for a motor.  In this workshop you will learn a bit both about motors and how the Arduino can be used as a controller.  At the end you should know enough to be able to add motion to your project.
......


Your Head

  • Think about your project and what sort of motion you want to give it.

The Computer

  • Plan to bring a laptop if you can. Any operating system.
  • Install and test run the Arduino IDE Arduino - Software

Stuff to Bring

Bring as much of this stuff as you can:

  • Your computer ( as above ).
  • Anything else you think might be useful.

Workshop Content Overview

Personal tools
Namespaces

Variants
Actions
Navigation
Toolbox